Xerox Phaser 3155 User Manual

6
Chapter
Adjustments and 
Calibrations
In this chapter...
•Adjustments
Downloaded From ManualsPrinter.com Manuals 

6-2Phaser 3140/3155/3160 Printer Service Manual
Adjustments and Calibrations
Adjustments
Altitude Specifications
Print quality is affected by atmospheric pressure, which varies by altitude. The 
following information contains instructions and specifications for adjusting 
altitude information for the Phaser 3140/3155/3160.
Note
Verify the Phaser 3140/3155/3160 printer driver has been installed.
Prior to performing the altitude adjustment procedure, determine the altitude 
location of the printer and the...

Phaser 3140/3155/3160 Printer Service Manual6-3
Adjustments and Calibrations
For Phaser 3140 and 3155
1. Click the Windows Start menu.
• For Windows 2000, select  Settings > Printers .
• For Windows XP/2003, select  Control Panel > Printers and Faxes .
• For Windows 2008/Vista, select  Control Panel > Hardware and Sound  > 
Printers .
2. Select the your printer’s driver and right-click to open  Properties.
3. In printer driver properties, select  Device Options.
4. Select necessary options in the...

6-4Phaser 3140/3155/3160 Printer Service Manual
Adjustments and Calibrations
Downloaded From ManualsPrinter.com Manuals 

7
Chapter
Cleaning and 
Maintenance
In this chapter...
• Service Maintenance Procedure
•Cleaning
•Maintenance
•Firmware Updates
Downloaded From ManualsPrinter.com Manuals 

7-2Phaser 3140/3155/3160 Printer Service Manual
Cleaning and Maintenance
Service Maintenance Procedure
Perform the following procedures whenever you check, service, or repair a printer. 
Cleaning the printer, as outlined in the following steps, assures proper operation 
and reduces the probability of service calls in the future.
The frequency of use, Average Monthly Print Volume (AMPV), media used, and 
environment determine how critical cleaning the printer is and how often it is 
necessary.
Recommended...

Phaser 3140/3155/3160 Printer Service Manual7-3
Cleaning and Maintenance
Cleaning the Print Cartridge
Caution
Do not touch the OPC Drum or expose the Print Cartridge to light for more 
than 5 minutes.
1. Open the Front Cover.
2. Remove the Print Cartridge (page 8-6).
3. Use a dry lint-free cloth to wipe to clean the Print Cartridge.
4. Use a dry lint-free cloth to wipe any dust and/or spilled toner from the Print  Cartridge area. Remove any paper debris from the area.
s3160-134
s3160-135
Downloaded From...

7-4Phaser 3140/3155/3160 Printer Service Manual
Cleaning and Maintenance
Cleaning the Laser Unit
1. Open the Font Cover.
2. Remove the Print Cartridge (page 8-6).
3. Use a dry Q-tip to wipe the long strip of glass of the Laser Unit.
Printing the Print Cleaning Page
If the printer has blurred or smeared printouts, you can clear the problem by 
printing a cleaning sheet.
In Ready mode, press and hold the Cancel button for approximately 10 seconds 
until the status LED blinks fast, and then release.
For...

Phaser 3140/3155/3160 Printer Service Manual7-5
Cleaning and Maintenance
Maintenance
RIP Procedures
Perform these maintenance procedures while servicing the printer.
• Clean the Feed Rollers, Exit Rollers, and Guides; replace if necessary.
• Remove and clean the paper tray.
• Print the Configuration and Error Information reports (page 4-2);
 diagnose 
and repair any problems as indicated.
• Check cleanliness of the interior and exterior, including fan; if necessary, clean  (dust or vacuum) these areas.
•...

7-6Phaser 3140/3155/3160 Printer Service Manual
Cleaning and Maintenance
Using a Network Connection
1. Ensure the printer is connected to the computer with a network connection.
2. Verify that you have downloaded the *.fls file.
3. Open a web browser.
4. Enter the printer’s IP address.
5. The CentreWare IS window is displayed.
6. Click the 
Print tab.
7. On the left side, click  Firmware Download.
8. Click the  Browse button and locate the “*.fls” file on your computer.
9. Select the “*.fls” file and...