Xerox Duplex Travel Scanner User Guide

Xerox® Duplex Travel Scanner Welcome
6User Guide
System Requirements
• Pentium 4 PC or equivalent processor
• A DVD-ROM drive capable of reading Dual Layer DVDs.
• An available Universal Serial Bus (USB) port
•Microsoft
® Windows® operating system: 
– 32-bit Windows XP (Service Pack 3)
– 32-bit or 64-bit Windows Vista (Service Pack 2)
– 32-bit or 64-bit Windows 7 (Service Pack 1)
– 32-bit or 64-bit Windows 8 / 8.1
– 32-bit or 64-bit Windows 10
• Minimum of 2 gigabyte (GB) of internal memory (RAM)
•...

Welcome Xerox® Duplex Travel Scanner
User Guide7
•Nuance PaperPort user’s guide—contains detailed information using the application and 
managing your scanned documents.
•Nuance OmniPage user’s guide—contains detailed instructions on using the software, 
including information on using Optical Character Recognition to create editable text files 
from the scanned documents.
•Nuance Power PDF help—contains detailed information on using the application to create 
and modify PDF files. This guide is a...

Xerox® Duplex Travel Scanner Welcome
8User Guide 

User Guide9
Unpack the Scanner
1. Remove the blue plastic strip from around the scanner.
2. Remove the clear plastic film from the top of the scanner.
3. Place your thumbs on either side of the paper feed slot, underneath the lid of the scanner. 
Hold the scanner sides firmly and pull the scanner lid up to release it from the body of the 
scanner.
Use both hands to open the scanner, the lid is held down with locking arms on both sides of 
the paper feed slot. If you open only one side, you may damage the...

Xerox® Duplex Travel Scanner Unpack the Scanner
10User Guide
5. Gently close the scanner lid. Press down on both sides of the lid until you hear a click as the 
arms lock the scanner lid in place.
Safety Lock
Your scanner may have a slot for installing a Kensington® style safety lock. This slot can be 
identified by the lock icon. It is to the left of the USB port on the scanner. When following the 
instructions in this document, make sure you connect the USB cable into the USB port which is 
identified...

User Guide11
Installation
Please make sure of the following before you begin installation:
• If you are prompted to reboot during installation, please select "No". Finish installing the rest 
of the software, then close all open windows and reboot your computer. 
• The information in this guide may cover software not provided with the scanner you 
purchased. Please disregard any information about the software not applicable to your 
scanner.
• If your computer has AntiVirus or AntiSpyware...

Xerox® Duplex Travel Scanner Installation
12User Guide
Install the Software and Connect the 
Scanner
1. Start Microsoft Windows and make sure that no other applications are running.
2. Insert the installation disc into your computer’s DVD-ROM drive.
The disc automatically starts.
3. The Select Language window opens. Click the drop-down menu arrow and select the 
language to use. Click OK.
The disc’s Main menu window opens.
Note: If the disc does not start, check the following:
– Make sure the disc...

Installation Xerox® Duplex Travel Scanner
User Guide13
4. On the Main menu, select Install software.
5. Make sure the boxes for Scanner Driver and Visioneer OneTouch are selected, as well as any 
other applications you want to install.
Note: The software provided with your scanner may differ slightly from the list shown in the 
window.
6. Click Install now. 

Xerox® Duplex Travel Scanner Installation
14User Guide
Installing the Scanner Driver
The scanner driver installation will start first.
1. The Welcome screen for the scanner driver Setup Wizard opens. Click Next.
2. On the Xerox License Agreement window, read the license agreement. If you accept the 
terms, select I Agree then click Next. 
If you choose not to accept the license agreement, click Cancel. Click Close on the 
Installation Interrupted window.
3. The software will now be installed.
4.Stop when...

Installation Xerox® Duplex Travel Scanner
User Guide15
Connect the USB Cable
The scanner does not have an external power supply. It draws its power directly from the 
computer through the USB cable. If you use a USB hub with your computer, the hub must have its 
own power supply. The scanner is ready to scan as soon as its software is finished loading onto 
your computer.
1. Remove any tape from the USB cable.
2. Plug the USB cable into the USB port on the scanner then into a USB port on the computer....