Xerox Documate 4790 User Guide

Scanning from TWAIN and WIA
Xerox
® DocuMate® 4790
User’s Guide7-153
Scanner Configuration
The scanner configuration tab shows the hardware information for your scanner.
Color correction:
Select the optimization style for color correction.
•"Printer" will optimize the image for duplicating on a printer.
•"Monitor" will optimize the image for displaying on a monitor.
Images optimized for a monitor, when printed, will not match the original scanned item.
Select Perform Color Correction on...

Scanning from TWAIN and WIA
Xerox
® DocuMate® 4790
User’s Guide 7-154 •Launch Xerox User Utility—the Xerox User Utility helps you monitor the scanner status and maintenance 
information.  This button will be disabled if the Xerox User Utility is not installed.  You can install the User 
Utility from the installation disc or download it from the support page for your scanner at 
www.xeroxscanners.com.
Hardware Properties and Interface Behavior
You can use the scanner’s properties page to keep track of...

Scanning from TWAIN and WIA
Xerox
® DocuMate® 4790
User’s Guide7-155
Color Correction
Select the optimization style for color correction.
•"Printer" will optimize the image for duplicating on a printer.
•"Monitor" will optimize the image for displaying on a monitor.
Images optimized for a monitor, when printed, will not match the original scanned item.
Select Perform Color Correction on the Color Processing tab in the Image Enhancements section to enable this 
option.
Scanner Details...

Scanning from TWAIN and WIA
Xerox
® DocuMate® 4790
User’s Guide 7-156 •Reset device—click this button to revert the scanner hardware back to the scanner’s firmware defaults. As 
this option resets the scanner hardware, you will not see a change in the interface unless the power save time 
has been changed. Clicking this button includes returning the power save time-out to the default setting.
Counters
•Counters—click the reset button next to the counter you want to set back to 0.
You can use this option...

Scanning from TWAIN and WIA
Xerox
® DocuMate® 4790
User’s Guide7-157
General
•Lock settings—this option prevents the user from making changes to the options in the scanner interface. 
When the interface opens, only the scanning Presets will be available for a user to select and use for 
scanning. 
•Default preset—select the preset you want to have be the default displayed options in the scanner interface 
each time it opens.
TWAIN Driver
•Auto transfer—scanning and transfer starts when the scanner...

Scanning from TWAIN and WIA
Xerox
® DocuMate® 4790
User’s Guide 7-158 

Xerox® DocuMate® 4790
User’s Guide8-159
8Scanning from ISIS
You can use the ISIS interface from QuickScan or any other application that will access the ISIS driver. Note that 
the ISIS interface for each application varies depending on the application. Please refer to that software 
application’s User Guide for instructions on scanning the ISIS interface. 
Open the QuickScan software to access the ISIS driver scanning options. Please note that you may see the 
following warning message:
1. Please...

Scanning from ISIS
Xerox
® DocuMate® 4790
User’s Guide 8-160 

Xerox® DocuMate® 4790
User’s Guide9-161
9Scanner Options, 
Maintenance and 
Troubleshooting
This section contains information on hardware options available for your scanner, the scanner User Utility, 
maintenance instructions, troubleshooting, uninstalling, scanner specifications, and spare parts.
Changing the Background Color
You can change the scanner’s background plate color between black and white. The background color is 
important as it may affect the cropping quality of the scanned document. Each...

Scanner Options, Maintenance and Troubleshooting
Xerox
® DocuMate® 4790
User’s Guide 9-162– Rotate each plate until the   mark (
➂) on the outside of the reference plate and the   mark (④) on the 
reference plate are aligned.
The color of the reference plate at this time will be the background color.
Note: 
• Always rotate the reference plates in the directions indicated by the arrows.
• Make sure that the   mark (
➂) on the outside of the reference plate and the   mark (④) on the reference 
plate are...