Xerox 8264E User Manual

Preparing For A Job
Xerox 8254E / 8264E Color Wide Format Printer
User Guide3-33
Test Printing
Follow the procedure below to perform test printing to confirm that the printer works correctly.
1. Press the [Power] key to turn the printer ON. 
2. Load the roll media.
Setting Roll Media
3. Confirm that "Ready to Print" is displayed in the control panel.
4. Display the Test Print menu in the control panel by doing the following.
a. Press the [Menu] key. "Menu 1: Setup>" displays in the...

Preparing For A Job
Xerox 8254E / 8264E Color Wide Format Printer
User Guide 3-34c. Press the [>] key. "Test1: Nozzle Check" displays in the control panel.
–Test Print Menu (Setup item 2 of 7 total)
5. Press the [+] key or [–] key to select an item for printing from the following items.
– Nozzle Check
–Mode Print
–Set List
– ALL Set List
–Palette Print
Note:
•When "Banner 1" or "Banner 2" is set in the Print Mode menu, PalettePrint is not 
displayed on the test print menu.Test...

Preparing For A Job
Xerox 8254E / 8264E Color Wide Format Printer
User Guide3-35
6. Press the [Enter] key.
– The printer begins generating a test print for the selected item.
Note:
•Refer to the following for details on each of the print list items.
Nozzle Check through Color Palette
7. Repeat Step 4 and Step 5 when you are generating a test print for other items.
8. Press the [Cancel] key to exit from Test Print. "Ready to Print" displays in the control panel.
Test printing is complete....

Preparing For A Job
Xerox 8254E / 8264E Color Wide Format Printer
User Guide 3-36
Set Up List
This is used to check the current set up of the printer. The English only examples are shown below.
Notes:
•User Media and Print Mode lists are printed only when ALL Set List is selected.
•Refer to th e following for p rinting procedure.
Test Print Menu (Setup item 2 of 7 total)
Downloaded From ManualsPrinter.com Manuals 

Preparing For A Job
Xerox 8254E / 8264E Color Wide Format Printer
User Guide3-37
Nozzle Check
This test is used to check whether there are any clogged nozzles, which may cause blurred prints or 
prints that are missing data.
Notes:
•If the Nozzle Check result indicates that the checked points are blurred or missing, clean 
the print head. Cleaning the Head
–Perform the Nozzle Check once again at the end of the work.
•Refer to the following for the printing procedure. Test Print Menu (Setup item 2 of 7...