Whirlpool Wve 1410 A W Product Sheet

							
PRODUCT SHEETGB
DFNLEPGRDKSNFINIGB1.
Compartment for freezing
2. Control unit
3. Area for drawers and pu ll out baskets/doors
4. Pull-out defrost water drain
5. Rating plate (on the inside of the appliance)
6. Ice packs (if provided) - ice cubes.
storage compartment
freezer compartment
Note: the design of  drawers and accessories may  vary, depending on the model.
Controls 
(depending on model)
A
Thermostat knob.
B Yellow LED: indicates  that the fast freeze 
function is in operation.
C Red LED: indicates that  the freezer internal 
temperature is too high. D
Green LED: indicates that the appliance is 
connected to the power supply.
E Fast freeze button.
5019 608 01078
A
BDC
EA
BDC
E
 
						

							
DFNLEPGRDKSNFINIGB
Freezer compartment temperature adjustment
The appliance is normally factory set for optimum operation at a temperature of -18°C.
To adjust the compartment temp erature, proceed as follows:
• Turn the thermostat knob  A
 to  1/Min
 for a storage temperature that is less cold.
 Turn the thermostat knob  A
 to  7/Max
 for a colder storage temperature.
 Turn the thermostat knob  A
 to  

 to switch off the freezer (the appl iance is still connected to the mains 
power supply).
Alarm signals
Defrosting
Signal Cause Solution
Temperature alarm
The red LED lights up  C
The internal 
temperature is above 
-12°C Press button 
E 
until the 
temperature returns 
below -12°C again
1. To switch off the freezer, turn knob  A
.
2. Unplug the appliance or switch off at the main 
switch.
3. Fit the drain in place (see figure).
4. Follow the instructions given in the 
instructions booklet.
5. Plug in the appliance once again.
6. To switch on the freezer again, turn knob  A
. Follow the steps detailed  in “Switching on the 
appliance”.
Printed in Italy 
5019 608 01078
01/11