Whirlpool Wtc 3735 A Nfcx Product Sheet

							A. Refrigerator Compartment
2.Internal light unit
3.Shelves / Shelf area
4. Multi-flowcold air system
5.Cooler compartment
6.Rating plate with commercial name
7a.Crisper divider
8.Eggs tray
9.Reversibility kit
10.Separator
11.Door trays
B. Freezer Compartment
12.Area for freezing (with/without flap)
13.Area for storing frozen foods
14.Ice tray
15.Plastic shelf
16.The freezer door trays for pizza or other frozen products with a
short storage time
Depending on the modelthe number and type of accessories may vary.
C. Control panel
Anti-bacterial protection :
1. Filter in fan(depending on the model)
7. Crisper with antibacterial additives(depending on the model)
17. Door seals
The crisper and the door seals are manufactured from materials that
inhibit bacterial growth.
Notes
- In case itll have a flap, please remember that to maximize the storage
volume its suggested to remove it.
- All shelves and door trays are removable.Freezer plastic shelf cannot be
removed to have a good air flow rate inside freezer compartment.
- The internal temperatures of the appliance depend on the ambient
temperature, frequency of opening the doors, as well as location of the
appliance. Temperature setting must consider these factors.
- The appliance accessories are not suitable for washing in dishwasher.
HOW TO START THE APPLIANCE
Fit the spacers (if supplied) on the upper part
of the condenser at the rear of the appliance.
After plugging the appliance to the mains, it
starts the operation automatically.
After starting the appliance, wait at least 4-6
hours before placing food into the appliance .
Particular control elements are activated:
 The indicator LEDs on the control panels light up for 2 seconds.
 Activation of a beep for 1 second.
Note:
 If food is placed in the refrigerator before the appliance has cooled
completely, it may deteriorate.
CONTROL PANEL DESCRIPTION(1)Cavity selection Fridge / Freezerpushbutton
(2)Green LED ON/OFF informing of:
- freezer cabinet temp. setting (green LED light ON) 
- fridge cabinet temp. setting - (green LED light OFF)
(3)Temperature selection button Temp.°C.
(4) (5) (6) Green LEDs indicating temperature settings.
(7) Reset alarmpushbutton.
Temperature Adjustment between cabinets is made
with the Fridge / Freezerbutton (1). When the
LED (2) is OFF the user can select temperature in
the fridge.
The temperature in the refrigerator compartmentmay be set by
the temperature setting pushbutton (3) on the control panel.
On the left there are described the 5 set
points for the fridge compartment.
At each short pressure of the Fridge /
Freezerbutton (1), the setpoint will change
(cyclically).
The medium temp. is the recommended
temperature settings.
To adjust the temperature in the freezer
compartment, use the Fridge / Freezerbutton
(1) to control the temperature in the freezer cabinet.
The green LED (2) turns ON.
The temperature in the freezer compartmentmay be set by the
temperature setting pushbutton (3) on the control panel.
On the left are described the 5 set points for
the freezer compartment and fast freezing.
At each short pressure of the Fridge /
Freezerbutton (1), the setpoint will change
(cyclically).
The medium temp. is the recommended
temperature settings.
After setting the Fast Freezing (automatically disabled after 48 hours)
the freezer temperature is set to previous displayed setpoints. When the
product is disconnected from the power supply and then reconnected,
the control unit remembers previously set temperatures for freezer and
refrigerator.
FAN WITH A BUTTON
The fan improves temperature distribution inside the refrigerator
compartment, allowing better preservation of stored food.
By default, the fan is ACTIVE.
It is advisable to keep the fan active, so that the Fresh Control function
can work and also when the ambient air temperature is over 27 ÷ 28°C
or if you perceive drops of water on the glass shelves or in the severe
humidity conditions.
Note
Do not obstruct the air intake area with food items.
When Fresh Control is disabled remember to turn off the fan
when there is a lower ambient air temperature. To turn  off the fan
press the button (1a).
If the appliance has the fan it can be equipped with the antibacterial
filter.
Remove it from the box (found in the crisper drawer (item 7) and insert
into the cover of fan (item 1b).
The replacement procedure is attached with the filter.
DEFROSTING THE REFRIGERATOR COMPARTMENT
Refrigerator compartment defrosting is completely automatic.
Droplets of water on the rear wall inside the refrigerator compartment
indicate that the automatic defrost phase is in progress. The defrost
water is automatically run into a drain hole and collected in a container,
where it evaporates.
DEFROSTING THE FREEZER COMPARTMENT
No Frostfreezers provide chilled air circulation around the storage
areas and prevent the formation of ice, thereby completely eliminating
the need for defrosting. Frozen items dont stick to the walls, labeling
stays legible and storage space remains neat and clear. 
PRODUCT SHEETGB
ROBGRUSHSKCZPLIGBFINDKNSGRPENLFD
high temp.med-high temp.medium temp.med-low temp.low temp.
Description:
LED OFF
LED ON
high temp.med-high temp.medium temp.med-low temp.low temp.fast freezing (Freezer)
Description:
LED OFF
LED ON
 
						

							REPLACING THE LIGHT BULB
Always disconnect the refrigerator from
the power supply before replacing any
light bulb.
If the inside light is not working, it is
necessary to:
1.Remove the light cover: put the fingers into the side ventilation
holes (1), stretch the cover gently and move it upwards.
2.Check the bulb. If necessary unscrew the broken bulb and replace it
with the new one.
3.Put on the light cover. 
Do not leave the bulb uncovered.
GUIDE TO SELECTING FUNCTIONS
Functions and settings
Temperature setting button Temp.°C is used to select the fridge/freezer
temperature set-point from among 5 levels (level 1, level 2, level 3, level
4, level 5) by consecutive pressing the button. Choices made depend on
LED (2) state.
Alarm deactivation- the user has to press Reset alarmpushbutton.
Fast Freezing:For more efficient freezing activate this function 48
hours before freezing fresh products.
- Select Freezer compartment by using button (1), LED (2) shall turn
ON.
- Press and hold the  temperature setting button Temp.°C until 3 green
LEDs light up simultaneously (4) (5) (6).
After 24 hours place the food to be frozen in the upper basket of the
freezer compartment.
This function is automatically disabled after 48 hours. To deactivate it
earlier follow the procedure:
- Press and hold by 3 sec. the temperature setting button Temp.°C again
while the LED (2) remains ON - the temperature selection lights will
return to previous displayed  temperature setpoint.
Reset alarm
If any alarm appears, the user could reset the acoustical sound by
pressing once Reset alarmpushbutton.
Black-out alarm (power supply failure)- in case of power failure,
the appliance automatically monitors the temperature changes in the
freezer compartment after the power supply returns. The Black-out
alarm will activate, if the temperature has risen above the admissible
level. This is indicated by:
- Flashing of the green LED (2)
- Activation of a beep.
When the Black-out alarm is actived, it is recommended to proceed as
follows:
- If the food in the freezer is not frozen but is still cold, transfer it
promptly to the refrigerator compartment and consume within 24
hours.- If the food in the freezer is frozen, it has re-frozen after thawing
caused by the power failure. The consumption of re-frozen food is not
recommended because it has lost its nutritive value and may be
hazardous to your health.
Note
The Black-out alarmdoes not guarantee the food quality and its
safety in case of consumption. It only indicates the necessity to assess
the quality of food in the freezer and refrigerator compartments.
To deactivate the alarm, press once Reset alarm pushbutton, the flashing
of the green LED (2) go off.
- The temperature will return to the normal operating cycle level and
the beep will stop.
Overtemperature alarmin freezer compartment.
Overtemperature alarm activation  is indicated by:
- Flashing of the green lamps (4) (5) (6).
- Activation of a beep.
The alarm is activated when:
 The appliance is connected to the power supply for the first time or
after prolonged disuse.
 The freezer compartment temperature is too high.
 The quantity of foods loaded into the freezer exceeds that indicated
on the data plate
 The freezer door has been left open for a long time .
To deactivate the beep of the alarm, press Reset alarm pushbutton. The
flashing LEDs (4) (5) (6) go off when the minimum required
temperature is reached.
6th Sense function
The 6th Sensefunction helps to maintain optimal conditions to
storage of food and is automatically activated when:
 a large amount of food is loaded into the freezer;
 the freezer door is left open for a long time;
 a prolonged power failure takes place, causing the internal
temperature of the appliance to increase to values that cannot
guarantee safe storage of food.
Fresh Control
The Fresh Control is activated by default and is working only with Fan
on. To disactivate the Fresh Control function press for at least 3 sec.
both buttons Cavity selection Fridge / Freezer and Te m p . ° C. A long
sound signal will be provided for the deactivation of the Fresh Control.
In order to activate this function follow the same procedure (keeping
pressed the 2 buttons for 3 sec.). A short sound signal will be provided
for the activation of the Fresh Control.
This function controls the fridge fan in order to optimize food
preservation in any ambient temperature conditions.
To minimize  the Energy consumption is suggested to disable the Fresh
Control function and fan.
5019 636 01007
Printed in Poland  02/10
OTHER ABNORMAL APPLIANCE OPERATIONS DISPLAYED BY LEDs
In case of abnormal appliance operation, all the temperature selection LEDs will flash and one beep will sound. To check the code
alarm user have to press and hold the temperature setting Temp.°C & Reset alarmpushbuttons and alarm code will be showing on
the temperature LEDs (possible alarm codes are explained in the table below).
When this operation is released, the LEDs will flash until the fault is eliminated. If any alarm shown in the table occurs, the
fridge/freezer functions such as temperature adjustment, super freezing are not available until the fault is eliminated.
When several alarms occur simultaneously, the alarm with the highest priority is displayed (Number 1 being the highest priority).
AlarmPriorityCodification to be displayed by
temperature lampsActionLED 4LED 5LED 6 
Evaporator Temperature Sensor Alarm - Freezer compartment1Contact the After-Sales Service and provide the alarm code. 
Evaporator Temperature Sensor  Alarm - Fridge compartment2Contact the After-Sales Service and provide the alarm code.
Ambient Temperature Sensor Alarm - Fridge compartment3Contact the After-Sales Service and provide the alarm code.
ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD
Description: LED OFF LED ON
PRODUCT SHEETGB