Whirlpool Wbe 3623 A Nfxf Product Sheet

							A. Control panel
B. Refrigerator Compartment
1.Filter in fan
2.Lighting
3.Shelves / Shelf area
4.Multi-flow cold air system
5.Cooler compartment (best for meat and fish)
6.Rating plate with commercial name
7.Fruits and vegetables crisper
8.Crisper divider
9.Reversibility kit
10.Egg tray
11.Separator
12.Door trays
C. Freezer Compartment
13.Upper basket (freezing zone)
14.Ice tray and/or cold accumulator
15.Shelves
16.Storage zones for frozen food items (basket or flap)
16a.Eco green basket (only in models with ECO
GREEN function) 
17.Door seals
18.The freezer door trays for pizza or other frozen
products  with a short storage time (2*storage
compartment)
Anti-bacterial protection (depending on the model):
- Antibacterial filter in the fan (1)
- Antibacterial additives in the Crisper (7)
- Door seals are made of material able to inhibit bacterial
growth (17).
Notes:
-Depending on the modelthe number and type of
accessories may vary.
- In case of power failure the cold accumulator helps to
keep optimal storage temperature longer.
- All shelves and door trays are removable.
- The internal temperatures of the appliance depend on
the ambient temperature, frequency of opening the
doors, as well as location of the appliance. Temperature
setting must consider these factors.
- The appliance accessories are not suitable for washing
in dishwasher.
- After inserting food, ensure that the freezer
compartment door closes properly.
TO INCREASE STORAGE
The freezer compartment can be used without the
baskets / flap and without upper shelf  to increase storage
for large products.
You can place the food products directly on the racks.
ORGANIZING MAT
The Organizing Mat is a mat
designed to better organize
the space on the shelf, and to
provide a soft-touch
experience when loading
heavy items on the shelf.
Some slots could also be used
to host bottles (horizontally positioned. In order to
remove it (for cleaning purpose, or to use it on top of
another shelf), first remove the shelf where it is currently
placed. The mat is dishwashable.
NET SHELF
The Net Shelf is the net,
which can be used to store
little items directly under the
glass shelf, taking full
advantage of this space.  Pull
down the net shelf (using the
lip on the front) to
load/unload it.
The net is flexible: do not
stress it by loading it with
bulky or heavy items.
Maximum weight allowed: 
2 kg. To remove the net (for
cleaning purpose, or to use it
under another shelf), you
have to first remove the glass shelf under which the net is
currently placed. The net shelf is dishwashable.
HYDROSENSE SHELVES
The special contour of the HydroSenseshelves creates a
barrier that contain spills and simplifies cleanup,
preventing liquids from leaking onto shelves below.
HOW TO START THE APPLIANCE
Fit the spacers (if supplied)
on the upper part of the
condenser at the rear of the
appliance.
After plugging the appliance
to the mains, it starts the
operation automatically.
After starting the appliance, wait at least 4-6 hours before
placing food into the appliance.
The indicator LEDs on the control panel light up for
approximately 1 second, and after initialization process,
setpoint is displayed.
PRODUCT SHEETGB
ROBGRUSHSKCZPLIGBFINDKNSGRPENLFD
 
						

							Note:
- If food is placed in the refrigarator before the appliance
has cooled completely, it may deteriorate.
FAN WITH A BUTTON
The fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation of
stored food.
To switch on the fan press the button (1a). It is advisable
to activate the fan when the ambient air temperature is
over 27 ÷ 28°C or if you perceive drops of water on the
glass shelves or in difficult humidity conditions.
Note:
Do not obstruct the air intake area with food items.
The fan will run ONLY when the compressor is in
operation.
Remember to turn off the fan when there is a lower
ambient air temperature.
If the appliance has the fan it can be equipped with the
antibacterial filter.
Remove it from the box (found in the crisper drawer
(item 7) and insert into the cover of fan (item 1b).
The replacement procedure is attached with the filter.
CONTROL PANEL DESCRIPTION
1.Fast Cooling function
2.Indication of temperature settings
3.Temperature selection / Fast Cooling (3sec.minimum)
pushbutton
4.Internal light switch
GUIDE TO SELECTING FUNCTIONS
TEMPERATURE SELECTION
Press the pushbutton on the control panel to adjust the
temperature.
Temperature selectionpushbutton is used to set
desired temperature level, from warmest  through
lower to coldest .
Pressing pushbutton setpoint will change cyclically.
Temperature set-point is done for both compartments at
one time – fridge and freezer.
At first plug-in of appliance factory set-point is chosen –
medium position.Following table shows set-points level:
Description: Led ON Led OFF
FAST COOLING function
Fast cooling 
The use of this function is recommended when placing a
very high quantity of food in the refrigerator compartment
By pressing and hold the pushbutton on the control panel
for 3 sec. it is possible to increase the cooling speed of the
foods inside the refrigerator compartment. The Fast
Cooling light (yellow LED) will turn on. The function is
automatically deactivated after 6 hours.
The Fast Cooling function can be manually deactivated by
pressing and hold the same pushbutton on the control
panel for 3 sec., the yellow LED is off.
Note:
- Fast Cooling function should be also switched ON
before placing fresh food to be frozen in  the freezer
compartment.
- Fast Cooling function has to be engaged in order to
maximize freezing capacity, thus it has to be engaged
before to add fresh food.
ECO GREEN function(depending on the model)
This function gives best food preservation performance
with the smallest energy consumption possible (around 5-
10% less in comparison with the normal settings  - middle
temperature ) if there  is lower amount of food to be
preserved in the appliance.
The best food preservation conditions when ECO GREEN
function is activated are in the ECO compartments:
- 2 eco green shelves in the fridge (with green frames)
- 1 eco green basket in freezer compartment
To active the Eco Greenfunction press the pushbutton
on the control panel to choose the mid-high
temperature, as showed here below:
PRODUCT SHEETGB
ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD
High temperature
Mid-high temperature
(Eco Green)
Middle temperature
Mid-low temperature
Low temperature
Fast cooling
Eco Green
 
						

							PRODUCT SHEETGB
5019 637 01090
Printed in Poland  01/11
ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD
ABNORMAL APPLIANCE OPERATION
When the product is plugged in to the mains, during first
10 minutes of its performance, possible temperature
sensor failure will be displayed according to following
table:
Description: Led OFF Led Flashing
The appliance will work preserving the food stored, but it
is necessary to contact after-sales service and provide
alarm code.
DEFROSTING THE FREEZER
COMPARTMENT
No Frostfreezers provide chilled air circulation around
the storage areas and prevent the formation of ice,
thereby completely eliminating the need for defrosting.
Frozen items dont stick to the walls, labeling stays legible
and storage space remains neat and clear.
DEFROSTING THE REFRIGERATOR
COMPARTMENT
Refrigerator compartment defrosting is completely
automatic.
Droplets of water on the rear wall inside the refrigerator
compartment indicate that the automatic defrost phase is
in progress. The  defrost water is automatically run into a
drain hole and collected in a container, where it
evaporates.
REPLACING THE LIGHT 
(depending on the model)
Always disconnect the
refrigerator from the power
supply before replacing any
light bulb.
If the inside light is not
working, it is necessary to:
1.Remove the light cover: put the fingers into the side
ventilation holes (1), stretch the cover gently and move
it upwards.
2.Check the bulb. If necessary unscrew the broken bulb
and replace it with the new one (max power of the
light bulb is given on the light cover).
3.Put on the light cover. 
Do not leave the bulb uncovered.
LEDs LIGHTING
If the inside LED light is not
working, it must be replace
by service.
Refrigerator sensor failure
Freezer sensor failure
Refrigerator & freezer 
sensor failure