Whirlpool ART 889 H Manual

							23
For Great Britain only
Warning - this appliance must be 
earthed
Fuse replacement
If the mains lead of this appliance is fitted with a 
BS 1363A 13amp fused plug, to change a fuse in 
this type of plug use an A.S.T.A. approved fuse 
to BS 1362 type and proceed as follows:
1.Remove the fuse cover (A) and fuse (B).
2.Fit replacement 13A fuse into fuse cover.
3.Refit both into plug.
Important:
The fuse cover must be refitted when changing a 
fuse and if the fuse cover is lost the plug must not 
be used until a correct replacement is fitted.
Correct replacement are identified by the colour 
insert or the colour embossed in words on the 
base of the plug.
Replacement fuse covers are available from 
your local electrical store.
Connection to a rewirable plug
If the fitted plug is not suitable for your socket 
outlet, then it should be cut off and disposed of in 
order to avoid a possible shock hazard should it 
be inserted into a 13A socket elsewhere.
A suitable alternative plug should then be fitted 
to the cable.
Connection to a rewirable plug
If the fitted plug is not suitable for your socket 
outlet, then it should be cut off and disposed of in 
order to avoid a possible shock hazard should it 
be inserted into a 13A socket elsewhere.
A suitable alternative plug should then be fitted 
to the cable.
1.yellow.
2.The BLUE wire must be connected to the 
terminal which is marked with the letter “N” or 
coloured black.
3.The BROWN wire must be connected to the 
terminal which is marked with the letter “L” or 
coloured red.
For the Republic of Ireland only
The information given in respect of Great Britain 
will frequently apply, but a third type of plug and 
socket is also used, the 2-pin, side earth type. 
In this case, the wire which is coloured GREEN 
AND YELLOW must be connected to the EARTH 
contact, and the two wires to the two pins, 
irrespective of colour. The supply to the socket 
must be fitted with a 16 amp fuse.
ELECTRICAL CONNECTION
33056-GB.fm5  Page 23  Saturday, January 16, 1999  8:47 AM