Whirlpool ARC 4170 WH Manual

							14
INSTRUCTIONS FOR USE
BEFORE USING THE REFRIGERATOR
SAFEGUARDING THE ENVIRONMENT
PRECAUTIONS AND GENERAL RECOMMENDATIONS
HOW TO OPERATE THE REFRIGERATOR COMPARTMENT
HOW TO OPERATE THE “EXTRA-COLD” COMPARTMENT
HOW TO OPERATE THE FREEZER COMPARTMENT
HABITUAL NOISES
CARE AND MAINTENANCE
TROUBLESHOOTING GUIDE
AFTER-SALES SERVICE
INSTALLATION
ELECTRICAL CONNECTION
3gb33008.fm  Page 14  Monday, December 9, 2002  3:59 PM
 
						

							15
FREEZER COMPARTMENT
1. Fast freezing compartment
2. Ice cube trays
3. Freezer door trays (if fitted)
4. Freezer control panelREFRIGERATOR COMPARTMENT
5. Extra-Cold Compartment
6. Refrigerator thermostat knob
7. Refrigerator inside light
8. Adjustable glass shelves
9. Crisper drawer
10. Air circulation system with anti-odour filter
11. Egg tray
12. Door trays
13. Bottle rack
14. Can holder (if provided)
15. Adjustable feet
3gb33008.fm  Page 15  Monday, December 9, 2002  3:59 PM
 
						

							16
BEFORE USING THE REFRIGERATOR
Your new appliance is a combined ventilated, no-
frost fridge-freezer exclusively for domestic use.
The great advantage of this appliance is that the 
refrigerator and freezer compartments are 
ventilated, therefore there is no ice or frost 
formation on the walls, thanks to the process 
described below. The cold is produced by an 
evaporator and distributed to the single 
compartments by means of a fan.
The air, after circulating in the compartments, is 
absorbed again by the evaporator, which also 
retains any humidity in the air. This prevents frost 
from forming on the compartment walls, as in 
traditional appliances, therefore 
there is no need 
to defrost the appliance.
The humidity absorbed by the evaporator is 
transformed into water, which is automatically 
routed to a container located on the compressor, 
from where it evaporates. The ventilated 
refrigeration system guarantees optimal food 
storage, maintaining the original characteristics 
longer.To get the most out of your new appliance, read 
the user handbook thoroughly. The handbook 
contains a description of the appliance and useful 
tips for storing food.
Keep this handbook for future consultation.
1. After unpacking the appliance, check for damage 
and make sure that the doors shut properly. Any 
damage must be reported to your dealer within 
24 hours after delivery of the appliance.
2. Wait at least two hours without moving the 
appliance before switching on. This will give 
the refrigerant circuit time to settle and 
operate efficiently.
3. Installation of the appliance and electrical 
connections must be carried out by a qualified 
electrician, in accordance with the 
manufacturer’s instructions and local 
regulations.
SAFEGUARDING THE ENVIRONMENT
1. Packing 
The packaging material is entirely recyclable, and 
marked with the recycling symbol. Follow local 
regulations for scrapping.
Keep the packaging materials (plastic bags, 
polystyrene parts, etc.) out of reach of children, as 
they are potentially dangerous.
2. Appliance
The appliance is made using recyclable materials. 
Disposal must be carried out in accordance with 
local environmental regulations for waste disposal.
Make the appliance unusable by cutting off the 
power cord. The appliance must be delivered to an 
authorised collection centre for the recovery of 
refrigerant gas.Information:
This appliance does not contain CFCs (replaced 
with R134a) or HFCs (replaced with R600a-
Isobutane). For more information, refer to the 
identification data plate affixed to the appliance.
3gb33008.fm  Page 16  Monday, December 9, 2002  3:59 PM
 
						

							17
PRECAUTIONS AND GENERAL RECOMMENDATIONS
•Use the 
refrigerator compartment only for 
storing fresh food and beverages and use the 
freezer compartment only for storing frozen 
food, freezing fresh food and making ice cubes.
•Do not cover or obstruct the air vents of the 
appliance.
•Do not store liquids in glass containers in the 
freezer compartment - danger of bursting.
•Do not eat ice cubes or ice lollies immediately 
after taking them out of the freezer 
compartment - risk of “cold” burns.
•Do not allow children to play or hide inside the 
appliance - risk of becoming trapped and 
suffocating.
•Do not ingest the contents (non-toxic) of the ice 
packs (if provided).• Before servicing or cleaning the appliance, 
unplug it from the mains or disconnect the 
electrical power supply.
•The power cable may only be replaced by an 
authorised person.
•After installation, make sure that the refrigerator 
is not standing on the power supply cable.
Declaration of conformity
This appliance is intended to come into contact with 
foodstuffs and conforms to D.L. 108 of 25.01.1992 
(European Directive 89/109/EEC)
.
Information
Appliances with Isobutane (R600a).
Isobutane is a natural gas with low environmental 
impact. Caution is required, however, since 
isobutane is flammable. Therefore, it is essential to 
ensure that refrigerant pipelines are not damaged.
HOW TO OPERATE THE REFRIGERATOR 
COMPARTMENT
The refrigerator compartment is designed for the storage of fresh food and beverages.
Defrosting of the refrigerator compartment is completely automatic.
The refrigerator can operate at ambient temperatures between +16°C and +43°C. Optimal performance is 
obtained at temperatures between +18°C and +43°C.
Switching on the appliance
•Plug in the appliance.
•The appliance will switch on automatically.
•The inside light switches on when the refrigerator door is opened.
Using the refrigerator
•Adjusting the temperature.
For correct operation and optimum storage of food, adjust the temperature in the refrigerator and freezer 
compartments separately.
Refrigerator thermostat
To adjust the temperature in the refrigerator compartment, turn the thermostat knob to the desired position.
•After being switched on, the refrigerator needs approximately 2 hours to reach the correct temperature 
to store a typical volume of food in the refrigerator compartment.
Moisture control
Some foods, such as fruit and vegetables, lose moisture when 
stored in cold, dry places. The crisper drawer maintains the right 
temperature and moisture level for storing fruit and vegetables. 
Using the Control Device, it is possible to adjust the airflow inside 
the crisper drawer.
•We recommend you keep the Control Device closed when storing 
vegetables and open when storing fruit. TEMPERATURE TYPE OF USE
Minimum Small amounts of food stored.
The door is seldom opened. 
Medium Normal use.
Maximum Large amounts of food stored.
The door is opened frequently.
3gb33008.fm  Page 17  Monday, December 9, 2002  3:59 PM
 
						

							18
HOW TO OPERATE THE “EXTRA-COLD” COMPARTMENT
How to use the refrigerator compartment
To maintain the vitamins, aroma, substance and freshness of 
the food to be stored, it is advisable to wrap food in aluminium 
foil, cling film or place it in special freezer containers with lids. 
This will prevent odours from mixing. Your refrigerator has an 
anti-odour system; the anti-odour filter is located in the cool 
air duct.
Important
Since appliance internal temperature is to all intents and 
purposes uniform thanks to the new ventilated system
 
(MULTI-FLOW), foods can be arranged on any shelf. However, 
take care not to obstruct the air vents in order to allow air to 
circulate freely.
•Do not place hot food in the refrigerator.
Anti-odour filter (if provided)
Some foods have strong odours. For this reason the refrigerator is 
equipped with a deodoriser that acts like a filter and eliminates 
the worry of storing strong odour savoury foods with more 
delicate sweet foods.
The deodoriser is located in the cool air duct.
The temperature inside this compartment is maintained constant and is colder than in other parts of 
the refrigerator. Dairy products can be stored in this compartment longer and drinks are chilled more 
rapidly; It can be used to store dairy products, cold meats and meat.
•If necessary, remove the extra-cold compartment, taking all the food out first. Pull the drawer out 
fully. Then, holding the compartment with both hands, carefully lift it up and out.
•It is not advisable to remove the tilting door from the extra-cold compartment.
MULTI-FLOW
3gb33008.fm  Page 18  Monday, December 9, 2002  3:59 PM
 
						

							19
HOW TO OPERATE THE FREEZER COMPARTMENT
The freezer compartment can be used for freezing fresh and cooked food, making ice cubes and storing 
frozen food.
Freezer control panel
•To adjust the temperature in the Freezer compartment, select the desired freezing level using the   
button on the control panel.
4 3
2
1
1. Operation LED
2. Door open alarm
3. Alarm mute button
4. Fast Freezing
ELECTRONIC CONTROL
This appliance is provided with an exclusive electronic control system. Thanks to this system, 
appliance operation is constantly monitored.
•In the event of a malfunction, the control system will activate an acoustic alarm and the LEDs on the 
control panel will blink.
•This system controls door closure. If a door is open, close it. The acoustic alarm is deactivated.
•This system also controls the internal temperature of the appliance. The acoustic alarm will sound if 
the internal temperature increases. Do not place hot food in the appliance.
•To mute the acoustic alarm press the “Alarm” button. The LEDs blink until the ideal internal 
temperature is reached.
•This electronic control system also has an auto check function. An acoustic alarm will immediately 
signal any malfunction in your appliance. This allows you to contact the After-sales Service to solve the 
problem rapidly.
•When the LEDs blink, the appliance should not to used for a prolonged period of time. Contact the 
After-sales Service as soon as possible.
•After approx. two hours, the acoustic alarm also signals the malfunction. Press the “Alarm” button. 
Unplug the appliance from the mains socket until the problem is solved by the After-sales Service.Minimum level: to be used when small 
amounts of food are stored in the Freezer 
and the door is seldom opened.
Medium level: to be used in normal 
conditions.
Maximum level: to be used when large 
amounts of food are stored in the Freezer 
and the door is opened frequently.
Fast Freezing: the three LEDs are alight. 
Select the Fast Freeze function for colder 
temperatures. This function switches off 
automatically after 18 hours.
3gb33008.fm  Page 19  Monday, December 9, 2002  3:59 PM
 
						

							20
Important:
•After switching on, the freezer compartment takes 
approximately 3 hours to reach a suitable temperature for frozen 
food storage.
How to freeze fresh food
You can use the freezer compartment to freeze food.
The amount of fresh food that can be frozen in 24 hours, at an 
ambient temperature of + 25°C, is indicated on the data plate.
How to proceed:
1.24 hours before freezing fresh food, press the fast freeze button.
2.Wrap and seal the food in aluminium foil, cling film, air and 
water-tight plastic bags, polythene containers with lids, 
freezer containers.
3.Place food in the upper part of the freezer, leaving enough 
space for air to circulate around packs.
4.For more efficient freezing, use the fast freeze function for 
the next 24 hours.
5.When freezing is complete, press the fast freeze button again.
Note:
•In the event of a power failure, the freezer compartment 
maintains the correct storage temperature for about 9/10 hours.
•Do not open the freezer compartment door during a power failure.
Important:
The table alongside shows the recommended maximum 
storage time for frozen fresh foods.
When purchasing frozen food products:
•Ensure that the packaging is not damaged (frozen food in 
damaged packaging may have deteriorated). If the package is 
swollen or has damp patches, it may not have been stored under 
optimal conditions and defrosting may have already begun.
•When shopping, leave frozen food purchases until last and 
transport the products in a thermally insulated cool bag.
•Place the items in the freezer compartment as soon as you 
get home.
Important:
•Do not place hot food in the freezer.
•Wrap foods in aluminium foil or cling film or place them in 
specific containers.
•Ensure all packs placed in the freezer have a label indicating 
the date of freezing and content.
•If food has defrosted even partially, do not re-freeze it. 
Consume within 24 hours.
•Avoid, or reduce temperature variations to the minimum.
•Respect the best-before date on the package.
•Always observe the storage information on the package.
Making ice cubesBend the ice trays slightly to remove ice cubes.
If your appliance is provided with the “Twist-Ice” feature, 
proceed as follows:
•Lift the ice cube tray and take it out.
•Fill the ice cube tray with water, being careful not to exceed 
the maximum level (indicated by the arrow).
•To remove the ice cubes just turn the lever with one twist 
clockwise.
The ice cubes conveniently fall into the ice bucket.
Important: 
Do not leave water in the ice bucket.
MONTHSFOOD
3gb33008.fm  Page 20  Monday, December 9, 2002  3:59 PM
 
						

							21
HABITUAL NOISES
Some noises are normal when the appliance is operating.
CARE AND MAINTENANCE
Breaking ice: Ice may break when moved. The noise is the same as that made by ice cubes 
when exposed to ambient temperature.
Compressor noise: Normal motor noise. This noise means the compressor is operating 
normally.
Gas expansion noise:It is normal to hear the noise of the expansion gas in the refrigeration 
system. This noise is similar to a balloon being inflated.
Defrost noise:Normal noise of flowing water. This can be heard when the unit is 
defrosting.
Fan system noise:Normal fan noise. This noise can be heard when the Multi-Flow system 
is operating normally. This system ensures a uniform temperature in the 
refrigerator so that defrosting is no longer necessary.
Before carrying out any cleaning operations, unplug the 
appliance.
•Clean the inside of the freezer compartment when defrosting.
•Periodically clean the inside of the refrigerator compartment 
with a sponge dampened in warm water and/or neutral 
detergent. Rinse the interior and dry with a soft cloth. Do not 
use abrasive products.
•Clean the outside with a damp cloth. Do not use abrasive 
products, scourers, stain-removers (e.g. acetone, 
trichloroethylene) or vinegar.
•Both refrigerator and freezer compartments are provided with 
an automatic defrosting function (no frost system).
• Periodically clean the condenser (radiator) at the rear of 
the appliance and the plinth with a vacuum cleaner or 
brush.
Prolonged disuse
1.Empty the refrigerator and freezer compartments
2.Disconnect the appliance from the mains power supply
3.Clean and dry both refrigerator and freezer compartments
4.Leave the doors open to prevent formation of unpleasant odours.
3gb33008.fm  Page 21  Monday, December 9, 2002  3:59 PM
 
						

							22
TROUBLESHOOTING GUIDE
1. The appliance is not working.
•Is there a power failure?
•Is the plug properly inserted in the socket?
•Is the double-pole switch on?
•Has the fuse blown?
•Is the power cord in perfect condition?
2. Temperature inside the compartments is not 
low enough.
•Are the doors closed properly?
•Is the appliance installed near a heat source?
•Is the thermostat setting correct?
•Are the air circulation grilles blocked?
•Is the condenser clean?
3. Temperature inside the refrigerator 
compartment is too low.
•Is the thermostat setting correct?
4. The appliance is excessively noisy.
•Is the appliance in contact with other 
furniture or objects?
•Are the pipes at the back touching or 
vibrating?5. The inside light is not working.
Perform the checks for problem 1, and then:
•Remove the shelf to allow access.
•Use a screwdriver to prise off the transparent 
bulb cover.
•Unscrew the bulb and replace it with one of 
the same type (max. 15 Watt), available from 
our After-sales Service.
•Refit the cover by pushing it gently into 
place.
6. The acoustic alarm is activated and the 
“Door open” LED blinks.
•The door has been left open for too long:
Close the door. Press the “Alarm mute” button 
if you need to leave the door open for a 
prolonged period of time.
7. The acoustic alarm is activated and all the 
LEDs blink.
•The door has been left open for too long:
Close the door.
•Refrigerator component malfunction:
Press the “Alarm mute“ button to deactivate 
the acoustic alarm. Contact the After-sales 
Service.
AFTER-SALES SERVICE
Before contacting After-Sales Service:
1.See if you can solve the problem yourself with 
the help of the Troubleshooting guide.
2.Switch the appliance on again to see if the 
problem has been solved. If it has not, 
disconnect the appliance from the power supply 
and wait for about an hour before switching on 
again.
3.If the problem persists after this course of 
action, contact After-sales Service.Specify:
•the nature of the problem,
•the model,
•the Service number (the number after the word 
SERVICE on the data plate on the inside of the 
appliance),
•your full address,
•your telephone number and area code.
Note:
The direction of door opening can be changed. If 
this operation is performed by After-sales 
Service it is not covered by the warranty.
3gb33008.fm  Page 22  Monday, December 9, 2002  3:59 PM
 
						

							23
INSTALLATION
•Install the appliance away from heat sources.
•Install the appliance in a dry, well-ventilated place.
•Ensure that the appliance is level. Adjust the front feet if 
necessary.
•Leave at least 5 cm clearance above the appliance.
•The sides of some models are extended at the rear so the 
appliance can be placed directly against the rear wall. 
Otherwise, fit the spacers (if supplied) on the upper part of 
the condenser at the rear of the appliance. For models 
without spacer walls, the distance between the unit and the 
wall must be at least 4.5 cm.
•Clean the inside (see the chapter “Care and Maintenance”).
•Fit the accessories supplied.
Electrical connection
•Electrical connections must be made in accordance with local 
regulations.
•Ensure that the voltage indicated on the appliance data plate 
corresponds to the domestic supply voltage.
• Regulations require that the appliance is earthed. The 
Manufacturer declines all liabilities for injury to persons 
or damage to property resulting from failure to observe 
these regulations.
•If the plug and socket are not of the same type, have the 
socket replaced by a qualified electrician.
•Do not use extension cables, multiple sockets or adapters.
Disconnecting the appliance
It must be possible to disconnect the appliance by unplugging 
it or by means of a two-pole switch fitted upline of the socket.
3gb33008.fm  Page 23  Monday, December 9, 2002  3:59 PM