Whirlpool 20TM L4 Manual
Here you can view all the pages of manual Whirlpool 20TM L4 Manual. The Whirlpool manuals for Fridge freezer are available online for free. You can easily download all the documents as PDF.
Page 1
3 INSTRUCTIONS FOR USE BEFORE USING THE APPLIANCE SAFEGUARDING THE ENVIRONMENT PRECAUTIONS AND GENERAL RECOMMENDATIONS IF THE APPLIANCE IS NOT GOING TO BE USED MAINTENANCE AND CLEANING STORING, FREEZING AND THAWING FOOD DESCRIPTION OF THE APPLIANCE “MULTIFLOW” AIR DISTRIBUTION GUIDE TO THE INSIDE PARTS USING THE APPLIANCE USING THE ICE AND WATER DISPENSER USING THE AUTOMATIC ICE-MAKER CHANGING A WATER FILTER CARTRIDGE TROUBLESHOOTING GUIDE AFTER-SALES SERVICE 501931502021_GB 22-06-2007 8:31 Pagina 3
Page 2
4 BEFORE USING THE APPLIANCE Your new appliance is designed exclusively for domestic use. After unpacking the appliance, make sure it is not damaged and that the door closes properly. Any damage must be reported to the dealer within 24 hours of delivery of the appliance. Wait at least two hours before switching the appliance on, to ensure that the refrigerant circuit is fully efficient.Installation and the electrical connection must be carried out by a qualified technician, according to the...
Page 3
5 INSTALLATION • The appliance must be handled and installed by two or more persons. • Be careful not to damage the floors (e.g. parquet) when moving the appliance. • During installation, make sure the appliance does not damage the power cable. • Make sure the appliance is not near a heat source. • To guarantee adequate ventilation, leave a space on both sides and above the appliance and follow the installation instructions. • Keep the appliance ventilation openings free. • Do not damage the...
Page 4
6 In case of power failures of up to 24 hours Keep the doors of the appliance closed. In this way the stored food will stay cold as long as possible. For further information see chapter “Using the appliance”, section “Black-out alarm”. If the appliance is not going to be used - Disconnect the appliance from the power supply. - Remove all the food if you are going away for more than three weeks. - If the appliance has an automatic ice-maker: 1. Shut off the water supply to the automatic ice-maker. 2....
Page 5
7 INTRODUCTION Wrap food so that no water, moisture or condensate can enter; this will prevent odours or aromas going from one part to another in the refrigerator, ensuring better preservation of frozen foods. Use plastic containers with hermetic lids, aluminium trays, aluminium foil, plastic film and waterproof plastic wraps. NOTE: Never place hot food in the freezer. Allow hot foods to cool to room temperature for 30 minutes, then wrap and freeze. Cooling hot foods before freezing saves energy and...
Page 6
8 DESCRIPTION OF THE APPLIANCE REFRIGERATOR COMPARTMENT A. Inside light B. Inside light C. Adjustable shelf D. Shelf - drawer lid E Crisper F. Crisper adjustment G. Meat / vegetable drawer H. Meat / vegetable drawer adjustment I. Dairy products compartment J. Door trays K. 2-litre door tray with bottle holder L. 0.75 litre door tray M. Water filter N. “Multiflow ” (depending on model)FREEZER COMPARTMENT O. Automatic ice-maker P. Glass shelves / Racks (depending on...
Page 7
9 Removing and repositioning the refrigerator compartment and freezer shelves. The shelves can be positioned as required. The glass shelves are strong enough to hold bottles, milk cartons and heavy food, however, take care not to bang products on the shelves. To remove the shelves: pull the shelf out as far as it goes, then lift and remove it. Removing the crisper or meat drawer: 1. slide the drawer out as far as it goes; 2. with one hand underneath the drawer, lift and pull it out; 3. the drawer will...
Page 8
10 FIRST USE Connect the appliance to the water system and power supply (refer to the Installation manual). When connecting the appliance to the power supply, the display will show the temperatures preset by the manufacturer. Note:Reaching the preset temperatures requires a variable amount of time. This time depends on several factors (times the door is open, amount of food stored, ambient temperature). Average time is between 2 to 3 hours. USING THE APPLIANCE 501931502021_GB 22-06-2007 8:31 Pagina 10
Page 9
1111 GUIDE TO SELECTING FUNCTIONS Menu This button is used to select the different options shown in the control panel. Each time the button is pressed, a different option is highlighted. OK The OKbutton is used to confirm the selected function and to deactivate the acoustic signal. Stand-by This function turns off the refrigerator and freezer compartments. To activate the standby function, press the button for 3 seconds: all icons will disappear from the display. To reset the function, carry out the...
Page 10
12 ALARMS The alarm icon is connected with the acoustic signal. Important:To disable the acoustic signal, press the OKbutton. Black-out alarm The alarm black-out activates when a prolonged interruption of the power supply has caused an increase in temperature in the freezer compartment. The freezer display will flash, showing the maximum temperature reached in the compartment during the interruption and the acoustic signal will come on. Important:Before consuming any food from the compartment ensure...