Westinghouse Television UW40T User Manual

LED TV BASE
16
English
11 IMPORTANT: Use one M6 x 10 screws to fix the 
stand base and LED TV on a wooden table.
REMOVING THE LED TV BASE
If you intend to repack the LED TV unit (for shipping or storage) or you want to 
change the installation to a wall mount option, you must first remove the LED TV 
base.
1
Turn off the LED TV and all connected devices.
2 Disconnect the power cord from the LED TV.
3 Disconnect all signal cables from the I/O port 
terminals.
4 Remove the M6 x 10 screw securing the base...

ANTENNA CONNECTION
17
English
ANTENNA CONNECTION
OUTDOOR ANTENNA CONNECTION
CABLE TV (CTV/DTV) CONNECTION
The unit has a TV tuner (75 ohm coaxial cable connector) located on the rear I/O 
panel for easy cable hookup. When connecting the 75 ohm coaxial cable to the unit, 
screw the 75 ohm cable to the TV tuner. Some cable TV companies offer premium 
pay channels. Since the signals of these channels are scrambled, a cable TV 
converter/descrambler is usually provided to the subscriber by the cable TV...

EXTERNAL DEVICE CONNECTIONS
18
English
• A position on the RF switch (not supplied) – You can view all unscrambled 
channels by using the TVs channel keys.
• B position on the RF switch (not supplied) – You can view the scrambled 
channels via the converter/descrambler by using the converters channel 
keys.
EXTERNAL DEVICE CONNECTIONS
You can enjoy picture and sound by connecting various audio-video devices to the 
terminals located on the rear and side I/O panels of the LED TV.
• TV cable input – You...

EXTERNAL DEVICE CONNECTIONS
19
English
The following diagram shows the external device connections.
HDMI1 USB HDMI2 SPDIF
TUNERVGA AUDIO
IN DC IN
VIDEO
RL
OUTRL
IN
Antenna cable / 
Cable TV line Antenna /
Cable systemPC
AUDIO OUTAUDIO OUT
3.5 mm stereo 
mini jack cable
RGB cable
Audio cableSPDIF cable
HDMI-HDMI 
cable DVI-HDMI 
cable
DVD player
with an HDMI 
terminal
AC to DC adapter
Power outlet
Home video 
game system
Camcorder
VCR
DVD 
playerDigital TV 
tuner
Composite AV 
cable
DVD player
with a DVI...

POWER CONNECTION
20
English
POWER CONNECTION
CONNECTING AC POWER
Connect the power cord of the AC adapter to the LED TV then to a proper AC outlet.
INITIAL SETUP
Press  on the control panel or on the remote control to turn on the LED TV. Select 
the desired language and select Ye s to use the SetupWizard. The SetupWizard will 
guide you on how to set up the LED TV’s operational settings.
IMPORTANT:The LED TV is designed to be powered via an AC adapter. Use ONLY the 
AC adapter included in the package....

POWER CONNECTION
21
English
WESTINGHOUSE HDTV SETUP
Select Language
Use the up and down arrows on your HDTV 
control panel or remote control to select the 
language to be used for menus and 
messages. Press Enter to continue. 
Time Zone
Use the up and down arrows on your HDTV 
control panel or remote control to select your 
local time zone. Press Enter to continue. 
Press Go Back to return to the previous 
screen. 
Power On Mode
Use the up and down arrows on your HDTV 
control panel or remote control to...

POWER CONNECTION
22
English
Select Channel Scan Type
Use the up and down arrows on your HDTV 
control panel or remote control to select the 
channel scan type. Press Enter to continue.
Press Go Back to return to the previous 
screen.
Channel Scan in progress 
The channel scan may take a while to 
complete. When the scan is complete, you will 
be able to watch your local TV programming.  

POWER CONNECTION
23
English
WESTINGHOUSE HDTV SETUP - THROUGH CABLE/ 
SATELLITE BOX
Select Language
Use the up and down arrows on your HDTV 
control panel or remote control to select the 
language to be used for menus and 
messages. Press Enter to continue. 
Time Zone
Use the up and down arrows on your HDTV 
control panel or remote control to select your 
local time zone. Press Enter to continue. 
Press Go Back to return to the previous 
screen. 
Power On Mode
Use the up and down arrows on your HDTV...

POWER CONNECTION
24
English
Channel Scan - Cable/Satellite Box
Select “Click here to connect a Cable Box or 
Satellite Box.” and press enter on your remote 
control to start scanning channels. Press 
Enter to continue.
Press Go Back to return to the previous 
screen. 
Cable/Satellite Box Input
Use the up and down arrows on your HDTV 
control panel or remote control to select the 
input connected to the set top box. Press 
Enter to continue.
Press Go Back to return to the previous 
screen.
RF Warning...

POWER CONNECTION
25
English
WESTINGHOUSE HDTV SETUP - NOT THROUGH CABLE/ 
SATELLITE BOX
Select Language
Use the up and down arrows on your HDTV 
control panel or remote control to select the 
language to be used for menus and 
messages. Press Enter to continue. 
Time Zone
Use the up and down arrows on your HDTV 
control panel or remote control to select your 
local time zone. Press Enter to continue. 
Press Go Back to return to the previous 
screen. 
Power On Mode
Use the up and down arrows on your HDTV...