Vodavi Starplus Hybrid Key Telephone System Installation Manual

. MAP 2. CO lines 1-28 and station 100-l 13 
appear in sequential order with 6 button pro- 
grammed as features on the button. 
b 
MAP 3. Stations 114-l 57 appear in sequential 
order with the bottom 6 buttons programmed as 
features.Provides the receiving station with 
DSS buttons when used in conjunction with 
DSS Map 2 for a full 28x56 CO/Station map- 
ping. 
DSWDLS Console Maps 2 & 3 
CO Line ringing on Map 1,2 is determined by CO Line 
Ringing Assignments. 
220.13 RELEASE KEY 
Allows the user to...

sTARPLUS@ SPD 1428 & 2856 Digital Key Telephone Systems 
SECTION 300 
- 
STATION FEATURE OPERATION 
300.1 INTRODUCTION 
The Starplus Digital (SPD) Key Telephone System 
has a wide variety of features and flexible program- 
ming, allowing each telephone user to program 
his/her telephone to meet his/her own individual 
needs. 
This section of the manual contains the operating 
instructions for key telephone and Single Line users 
and includes an illustration of the key telephone used 
in the Starplus...

Digital Key Telephone Systems sTARPLUS@ SPD 1428 & 2856 
OUTSIDE CALLS are announced by a tone signal 
repeated every 3.2 seconds. The corresponding out- 
side line indicator will flash slowly. INTERCOM CALLS can be tone ringing or voice 
announce If it is voice announced, the receiving 
station will receive 2 bursts of tone prior to the 
announcement. If it is a tone ringing call, the receiv- 
ing station will hear a tone ring every 2.4 seconds. 
Figure 300-l 34 Button Digital Display Terminal 
300-2...

Table 366-l Starplus Digital Terminal Numbering Plan 
loo-127 Station Intercom Numbers (SPD 1428) 
108-155 Station Intercom Numbers (SPD 2856) 
199 Modem via DISA access 
22 tc1 Call Park Location 6-7 (system) 
228 Personal Park 
33 WI Hunt Group Pilot Numbers O-7 
MM Voice Mail Group Pilot Numbers 6-7 
420 goo

Digital Key Telephone Systems STARPLUS@ SPD 1428 & 2856 
300.3 ANSWERING AN OUTSIDE CALL 
a. 
b. Lift handset. 
Press slow flashing outside line button, or Loop 
button. (If your telephone is programmed with 
Preferred Line Answer, you may answer an 
outside line by lifting the handset.) 
300.4 PLACING AN OUTSIDE CALL ON 
HOLD 
a. If your system is programmed for Exclusive 
Hold Preference, press HOLD button once for 
Exclusive Hold and twice for System Hold. 
b. If your system is programmed for System...

STARPLUS@ SPD 1428 & 2858 
Digital Key Telephone Systems 
300.12 CALL FORWARD: STATION 
A. Call Forward - All Calls 
If you have been given the ability to forward your 
calls: 
1. Lift handset or press ON/OFF button. 
2. Press the pre-programmed* FWD button. 
3. Press station key or dial intercom number 
where calls are to be forwarded, including 
UCD, Voice Mail, and Hunt group pilot num- 
bers. 
4. Replace the handset or press the ON/OFF but- 
ton. 
Line Queue, Call back requests, message wait re-...

Canceling Off-Net Forwarding 
1. Lift handset or press ON/OFF button. 
2. Press the pre-programmed* FWD button. CALL 
FWD button LED is extinguished. 
*Refer to Flexible Button programming 
F. Call Forward - UCD Groups 
If you have been given the ability to forward your 
calls: 
1. Lift the handset or press ON/OFF button. 
2. Press the pre-programmed* FWD button. 
3. Dial the desired code: 
m = no answer calls 
[8] = busy calls 
[9] = busy and no answer calls. 
NOTE: Skip the preceding step for immediate...

press the programmed button for the speed bin. 
Confirmation tone is heard. 
Canceling Off-Net Forwarding 
a. Dial [603] on the dial pad. 
b. Dial the CO group access code or press an 
individual CO Line button. 
c. Dial [#I. Confirmation tone is heard. 
300.15 CALLING STATION TONE MODE OP- 
TION 
Allows a calling station to override a calted stations 
H or P intercom switch settings. 
When placing a call to a station and Tone ringing is 
desired: 
a. Dial [6#] on the dial pad. 
b. Dial the 3-digit...

Digital Key Telephone Systems sTARPLUS@ SPD 1428 & 2856 
greeting of the mailbox user and any applicable 
instructions. 
300.20 CAMP-ON 
If you call a station that is busy and wish to alert them 
to your call: 
a. Press the pre-programmed’ CAMP ON button. 
b. Called station will receive two bursts of ringing. 
c. Wait for their response 
d. When called party answers, consult with them 
or hang up to transfer the call. 
If a station is in DND, only the attendant can Camp 
On using the attendant override...

300.24 DIRECTED CALL PICK-UP 
When incoming, transferred, or recalling outside line 
ringing, intercom ringing, or Camp On ringing is 
heard at an unattended telephone: 
a. Dial the station number of the known ringing 
telephone. 
b. Receive ringback tone, or call announce tone. 
C. Press the pre-programmed* PICK UP button to 
answer the call.  Re-entering a Conference 
When the controller re-enters the conference, the 
disconnect timer is reset. 
a. Lift handset to re-enter a monitored conference. 
b....