Vodavi Starplus 2448ex Hybrid Key Telephone System Installation Manual

CO LINE PROGRAMMING (Cont’d) 
D. 
1. 
2. 
3. Loop Supervision Programming 
Programming Steps 
Description 
Press the SUPV flexible button (Button #4). SUPV. Loop supervision is used primarily with 
Enter a one-digit timer value on the dial pad 
between 1 and 9 which corresponds to 100-900 
msec. An entry of 0 disables Loop Supervision. 
Press the HOLD button to enter data. DISA, Voice Mail/&to Attendant and with u&per- 
vised conference applications. It provides the sys- 
tern with the ability to detect...

co 
F. 
1. 
2. 
3. 
G. 
1. 
2. 
3. LINE PROGRAMMING (Cont’d) 
Flash Timer Programming 
Programming Steps Description 
Press the FLASH flexible button (Button #6). 
Enter a two-digit timer value between 01-20 
which corresponds to 1 OOmsec-2 seconds. 
Press the HOLD button to enter data. FLASH. Flash is a programmable opening on a line 
for signaling. When using an outside line, flash 
allows a user to obtain new dial tone without losing 
the line. This is particularly useful behind a PBX or 
Centrex....

STARPLUS@ 2448EX Hybrid Key Telephone System 
SECTION 630 
STATION ATTRIBUTES PROGRAMMING 
630.1 STATION PROGRAMMING 
Programming Steps 
If the system is in the programming mode, continue 
using program codes. If starting to program here, 
enter the programming mode first (Refer to Para- 
graph 600.3). 
If station features are to be changed: 
A. Press FLASH and dial (501. The following mes- 
sage is shown on the display phone: 
B. Program button twelve (SLCT) will be lit. Enter 
a four (4) digit number...

STATION PROGRAMMING (Cont’d) 
A. Paging Access 
Programming Steps 
1. Press the PAGE flexible button (Page 
A, Button 
#l). 
l LED on = Paging is allowed 
l LED off= Paging is denied 
2. Press the HOLD button to enter data. 
B. Do Not Disturb 
Programming Steps 
1. Press the DND flexible button (Page 
A, Button 
#2). 
l LED on = Do Not Disturb is allowed 
l LED off= Do Not Disturb is denied 
2. Press the HOLD button to enter data. 
C. Speed Dialing Access 
Programming Steps 
1. Press the SPEED flexible...

STARPLUS@ 2448EX 
Hybrid Key Telephone System 
STATION PROGRAMMING (Cont’d) 
K. Station Class of Service (COS) 
Programming Steps 
1. Press the COS flexible button (Page B, Button 
#2). 
2. Enter a one-digit Class of Service entry. The six 
classes of service are: 
1= unrestricted 
2= governed by Table A 
3= governed by Table B 
4= governed by Tables A and B 
5= no 0,i ,‘,# as first digit, 7 digits max. 
6= intercom only (no CO Line access) 
3. Press the HOLD button to enter data. Display 
will now...

Hybrid Key Telephone System sTARPLUS@ 2448EX 
STATION PROGRAMMING (Coht’d) 
M. Pick-Up Group(s) Programming 
Programming Steps 
1. Press the PKUP flexible button (Page 6, Button 
w 
2. Enter a one-to-four digit number to program 
pickup groups. 
0= no group 
l= Group 1 
2= Group 2 
3= Group 3 
4= Group 4 
3. Press the HOLD button to enter data. Description 
PKUP. Each station is assigned into pick up groups. 
Stations can be in any combination of the four groups 
or in no group at all. 
Default: By...

STARPLUS@ 2448EX 
Hybrid Key Telephone System 
STATION PROGRAMMING (Cont’d) 
0. 
1. 
2. Preset Call Forward Programming 
Programming Steps 
Press the PREFW flexible button (Page B, But- 
ton #6). 
Enter a two-digit number to determine the des- 
tination where calls are to be routed when the 
preset forward timer expires. 
1 O-57= Station Numbers 
3. Press the HOLD button to enter data. Display 
now updates. 
r-lr---lr---ln 
uuuu 
Description 
PREFW. This feature allows the system database to 
be...

Hybrid Key Telephone System sTARPLUS@ 2448EX 
STATION PROGRAMMING (Cont’d) 
P. 
1. 
2. 
3. CO Line Group Access 
Programming Steps 
Press the ACC flexible button (Page B, Button 
#7). 
Enter up to seven digits (0, or 1-7) for the 
outside line groups the station will have access 
to. 
0 -no access 
1 =access to Group 1, Code 9 or 81 
2 =access to Group 2, Code 82 
3 =access to Group 3, Code 83 
4 =access to Group 4, Code 84 
5 =access to Group 5, Code 85 
6 =access to Group 6, Code 86 
7 -access to Group...

STATION PROGRAMMING (Cont’d) 
Q. Flexible Button Programming 
Programming Steps Description 
1. Press the FLEX flexible button (Page B, Button FLEX. When programming flexible buttons, first en- 
#8). The following message is shown on the 
ter the two digit button number to be programmed 
display phone: (01 to 16). 
2. Enter the button information as follows: 
where: BB= Button number (01-l 6) 
0 
MULTI: To assign a button as a multi-function 
button (user programmable) enter: 
BB [0] HOLD 
. CO...

STATION PROGRAMMING (Cont’d) 
Flexible Button Programming (Cont’d) 
Programming Steps 
. 
UNASSIGN: To unassign a button, rendering it 
inoperable: 
For Keyset, enter BB [#] HOLD 
For an SLT, enter [00] [#] HOLD 
. SLT CO/LINE/RINGING: To assign a SLT to 
CO. When programming a Single Line Telephone 
ring on a CO Line, enter: (SLT) to ring on a CO line , the user enters the 
[00] [l] LL R HOLD two-digit button number as [00], a [l] followed by the 
LL= CO Line 01-24 two-digit CO Line number (01-24) and...