Vodavi Infinite Gk-816 Installation Manual

Infinite 816 Key Telephone System STATION ATTRIBUTES PROG-G 
Station Attributes 
Programming (Cont’d) 
710.3 
F- STATION NUh3BERS 
gpmmirg Steps 
Descriptton 
If the system is in the Programming mode, 
continue using program codes. If starting to 
program here, enter the Programming mode 
fist (See Paragraph 700.4). 
If station intercom numbers are to be changed: 
a. Dial an asterisk [*I and 1031 on the dial pad. 
b. Press the button of the station whose in- 
tercom number is to be changed (LED will...

STATION ATTRlBUlXS PROGRAMMING Infinite 816 Key Telephone System 
Station Attributes Programming (Cont’d) 
710.4 CO LINE ACCESS 
Proggamdng Steps 
Lf the system is in the Programming mode, 
continue using program codes. If starting to 
program here, enter the Programming mode 
first (See Paragraph 700.4). 
If CO Line access is to be changed: Description 
Telephones are allowed or denied access to CO 
(outside] lines. This is programmable on a per 
telephone per CO Une basis. 
Default: By default, all...

Infinite 826 Key Telephone S@em STATION ATTRIBUTES PROG-G 
Station Attributes Programming (Cmt’d) 
710.5 PAGE/PICKUP GROUPS 
Progmnming Steps 
lf the system is in the Programming mode, 
continue using program codes. If stxting to 
program here, enter the Programming mode 
first (See Paragraph 700.4). 
If page/pickup groups are to be changed: 
a Dial an asterfsk [*] and [05] on the dfal pad. 
b. Press the station button of the station to 
be programmed. 
c. Toggle on or off the program button for the...

Infinite 82 6 Key Telephone System CO LINE ATTRIBUTES PROGRAMMING 
SECTION 720 
CO LINE ATTRIBUTES PROGRAMMING 
720.1 CO LXNE GROUPS 
n Steps 
Descrfptfon 
If the system fs fn the Programming mode, 
continue usfng program codes. If startfng to 
program here, enter the Programming mode 
first (See Paragraph 700.4). 
To assign CO lfne groups: 
a Dfalanasterfsk[*]and[ll]onthedfalpad. 
b. Press the CO lfne as fndfcated on the 
program buttons. 
c. Then press the button for the CO lfne 
group that CO lfne fs...

CO LINE ATTRIBUTES PROGIUMMING Infinite 816 Key Telephone System 
CO Lfne Attributes Programming (Cont’d) 
720.2 CO LINE CONFIGURATION 
gmmming Steps Description 
If the system is in the Programming mode, 
continue using program codes. If starting to 
program here, enter the Programming mode 
first (See Paragraph 700.4). 
If any CO line features are to be changed: 
a. Dial an asterisk [*] and [ 121 on the d&l pad. 
b. Press the CO line button 
of the line to be 
programmed. 
c. Toggle the program buttons...

Irtj%-tite 816 Key Telephone System CO LINE ATI’RIBUTES PROGBWMING 
CO Line Attributes Programming (Cont’d) 
720.3 CO LINE RINGING - DAY 
ProgrammfnfE Steps Description 
lf the system is in the Programming mode, 
continue using program codes. If starting to 
program here, enter the Programming mode 
first (See Paragraph 700.4). 
To change which stations ring: 
a. Dial an asterisk [‘] and [ 131 on the dial pad 
for day ringing stations. 
b. Press the outside line that is to be pro- 
grammed. Telephones...

CO LINE ATTRIBUTES PROGRMJMING Infinite 816 Key Telephone System 
CO Line Attributes Programming 0ut’dl 
720.4 CO LINE RINGING - NIGET 
ProgrammUg Steps 
lf the system is in the Programming mode. 
continue using program codes. If starting to 
program here, enter the Programming mode 
first (See Paragraph 700.4). 
a. Dial an asterisk [*I and [ 141 on the dial pad 
for night ringing stations. 
b. Press the outside kne that is to be pro- 
grammed. 
c. Then press station buttons for stations 
that are to...

Infinite 816 Key Telephone System CO LINE ATTRIBUTES PROGRAMMING 
CO Liue Attributes Programmiug (mnt’d) 
720.5 FLASHTIMER 
jgammhg Steps 
Description 
If the system ls in the Programming mode, 
continue using program codes. If starting to 
program here, enter the Programming mode 
first (See Paragraph 700.4). 
If the Flash timer is to be changed: 
a Dial an asterisk [*I and [ 151 
on the dial pad. 
The first CO line button will light for pro- 
gramming. 
b. Press CO lfne to be programmed. 
c. Enter the...

CO LINK A’ITRIRUTKS PROGRWMING Infinite 816 Key Telephone System 
CO Line Attributes Programming (Cont’d) 
720.6 CO RING DETECT 
gganming Steps Description 
If the system is in the Programming mode, 
continue using program codes. If &Wing to 
program here, enter the Programming mode 
first (See Paragraph 700.4). 
If CO Ring Detect timing is to be changed: 
a. Dialanasterisk[*jand[16]onthedialpad. 
b. Press CO line button for the line the timer 
will affect. The duration of the ringing signal from the CO...