Home
>
Vodavi
>
Telephone
>
Vodavi Infinite 4096 Key Telephone System Installation And Maintenance Manual
Vodavi Infinite 4096 Key Telephone System Installation And Maintenance Manual
Here you can view all the pages of manual Vodavi Infinite 4096 Key Telephone System Installation And Maintenance Manual. The Vodavi manuals for Telephone are available online for free. You can easily download all the documents as PDF.
Page 281
Infinite 4096 Hybrid Eey Telephone System INFATTE4096COMPONENT LIST / 1 1 I 1 1 L 1 APPENDIX B mllV=F’mTE 4096 COMPONENT LIST Appendix El &jMte 4096 Component List 4096 Basic Key Service Unit (KSUI 4096 Central Processor Board (CPB) DC/DC Converter (DCUj Key Station Interface Board (KIB) Central Office Interface Board (COB) Arnpmed Central Of&e Board (COA) Power Supply Unit (PS) External Power Supply Housing (EPS) Enhanced Key Telephone Executtve Key Telephone Expansion Key Service...
Page 282
AECThe Description APPENDIX C Messengerm 212 Plus AEc’s ‘Ihe Messenger 212 Plus. Dual-Line Announcer can be used to provide the Re- corded Announcement feature of the Zr@i& 4096 Uniform Call Distribution feature (UCD) that provides unanswered incoming CO Calls or calls in queue with a recorded message while waiting for an available UCD station. The In$ni& 4096 systems provide a program- mable option that allows the use of unused CO line positions. SLT ports as the specified RAN output...
Page 283
AEC The Messenger= 2 12 Plus hfiite 4096 Hybrid Eey Telephone System F’i@m Cl SLT to AEC Connectiona 2. The internal jumper plug of the Messen- ger 212 Plus unit should be set to the first altematlve setting for a 600 ohm transformer coupled audio output. Check the Messenger 2 12 Plus Owners Manual for procedures on changing the internal jumper plug. NOTE: Using the 600 ohm setting of the Messenger 2 12 Plus both lines of the Messenger must be connected to any combination of the APL RAN out-...
Page 284
Injinite 4096 Hybrid Key Telephone System AEC The Messengerm 212 Plus APL RAN Jade PklX STOP 1 START 2 VOICE 3 VOICE 4 START 5 212 Plus Line Jack PinX 1 STOP 2 STOP D 3 4 VOICE 5 VOICE b 6 STOP 6 7 GROUND 8 START Fi@1reG2 ACTSCond.to6Cond.RANLheCord To install the Messenger 2 12 Plus using a CO circuit as the interface connect as described below. (see figure 3) 1. Connect the 300 ohm resistor ln series with the - (negattve) lead of the 24 volt DC power supply and the CO tip on...
Page 285
AEC The Messengean 212 Plus Finite 4096 Hybrid Key Telephone System nouncement Table so that it ls approxi- mately one second longer than the actual message. d WhenaCOlfnehastxenuseditwillbe necessaq to program an LBC contact to that particular line. This is accompkhed in Loud Bell Control assignments @WISH 16). AssigntheCOporttobeusedforthe RAN operation to one of the LBC contacts. Refer to the Iry%ti& 4096 Description. Instal- lation and Operation manual for further in- structfons on how...