VIZIO M3d650sv User Guide

							7
44
Answer menu is displayed.
11.  Enter your security answer using the QWERTY	Keyboard and 
press  OK. The Create Profile menu is displayed.
12.  Highlight  Done and press OK.
Creating	a	New	User	Profile
To create a new user profile:
1 .  Press the V	Button on the remote.
2 .  Highlight the Profile App by scrolling left and right using the 
Left/Right	 Arrow buttons on the remote. (The highlighted 
App is in the lower left corner of the screen.)
3 .  Select the App by pressing the OK button. The Profile App is 
displayed.
4 .  Highlight  Administrative	Controls and press OK. (If you have 
an Owner PIN, you must enter it now.) The Administrative 
Controls menu is displayed.
5 .  Highlight  Create	Profile and press OK. The Create Profile 
menu is displayed.
6 .  Highlight the Name field and press OK. 
7 .  Enter your name using the QWERTY	Keyboard on the remote 
or the on-screen keyboard, then press OK. The Create Profile 
menu is displayed.
8 .  Highlight  Avatar and press OK. The Avatar menu is displayed.
9 .  Highlight a picture for your profile and press OK. The  Create 
Profile menu is displayed.
10.  Highlight  Create	Profile	PIN and press OK. The PIN Creation 
menu is displayed.
11.  Enter a 4-digit passcode using the Number Pad on the 
remote or the on-screen number pad. Write down your 
passcode and save it in a secure location.  12.
 Highlight  OK and press OK. The PIN Confirmation menu is 
displayed.
13.  Re-enter your 4-digit passcode. Highlight OK and press OK. 
The Security Question dialog is displayed. Press OK.
14.  Highlight a security question and press OK. The  Security 
Answer menu is displayed.
15.  Enter your security answer using the QWERTY	Keyboard and 
press  OK. The Create Profile menu is displayed.
16.  If you would like to prevent the user of this new profile from 
installing new Apps, turn Limit	Profile to On. (You need an 
Owner PIN. Enter it after turning Limit Profile to On.)
17.  Highlight  Done and press OK.
  
						

							7
45
Removing	a	User	Profile
To remove a user profile:
1 . Press the V	Button on the remote.
2 .  Highlight the Profile App by scrolling left and right using the 
Left/Right	 Arrow buttons on the remote. (The highlighted 
App is in the lower left corner of the screen.)
3 .  Select the App by pressing the OK button. The Profile App is 
displayed.
4 .  Highlight  Administrative	Controls and press OK. (If you have 
an Owner PIN, you must enter it now.) The Administrative 
Controls menu is displayed.
5 .  Highlight  Remove	Profile and press OK. The Remove Profile 
menu is displayed.
6 .  Highlight the name of the profile you want to remove and 
press  OK. The TV displays, “Are you sure you want to delete 
this profile? This operation cannot be undone.”
7 .  Highlight  OK and press OK.restOr Ing the VIA DOck tO the fActOry DefAUlt 
settIngs
The VIA Dock, and all of its installed Widgets can be restored to 
the factory default settings.
If you restore the VIA dock to the factory-default 
settings, all changes you have made to the VIA dock 
will be lost!
To restore the VIA Dock to the factory default settings:
1 . Press the V	Button on the remote.
2 .  Highlight the Profile App by scrolling left and right using the 
Left/Right	 Arrow buttons on the remote. (The highlighted 
App is in the lower left corner of the screen.)
3 .  Select the App by pressing the OK button. The Profile App is 
displayed.
4 .  Highlight  System	Settings and press OK. The System Settings 
menu is displayed.
5 .  Highlight  Restore	Factory	Settings and press OK. The TV 
displays, “Are you sure you want to proceed?”
6 .  Select  Restore	Factory	Settings and press OK. The TV 
displays, “Are you sure?”
7 .  Highlight  Restore	Factory	Settings and press OK.
8 .  Wait 5 seconds for the TV to restart. 
  
						

							8
46
How to View 3D
How THeaTer 3D works
Because our eyes have space between them, when we look 
around, we see two slightly different pictures. We never notice, 
because we are able to combine these pictures into one three-
dimensional image.
The VIZIO Theater 3D HDTV takes advantage of this phenomenon 
to create a stunning 3D image. When displaying 3D content, the 
3D HDTV actually displays two separate images at the same 
time—one for each eye.
Because Theater 3D glasses only allow each eye to see its 
intended image, your brain is able to process the picture in 
the same way as any other object you see. The final result is a 
stunning, life-like 3D picture.
wHaT You NeeD To View 3D CoNTeNT
To view 3D content, you will need:•	VIZIO Theater 3D HDTV
•	 3D Blu-ray
™ player with a Blu-ray 3D™ disc (sold 
separately)
•	 VIZIO Theater 3D Glasses
•	 3D-Ready HDMI cable (sold separately)
waTCHiNg Blu-raY 3D CoNTeNT
To view Blu-ray 3D content:
1 . Ensure you have the following equipment:
•	VIZIO Theater 3D HDTV
•	 3D Blu-ray
™ player with a Blu-ray 3D™ disc (sold 
separately)
•	 VIZIO Theater 3D Glasses
•	 3D-Ready HDMI cable (sold separately)
2 .  Ensure the 3D Blu-ray player and your TV are connected with 
the 3D-Ready HDMI cable. 
3 .  Turn the 3D Blu-ray player off. Press the Power/Standby  
button on the remote to turn the TV on.
4 .  Press the INPUT button on the remote and select the input to 
which the Blu-ray player is connected (HDMI-1, HDMI-2, etc).
5 .  Turn the 3D Blu-ray player on. Insert the Blu-ray 3D disc into 
the player.
6 .  When the disc is loaded, select the Play Movie option in the 
disc’s main menu.
7 .  The TV displays, “3D Content detected. Select YES to switch to 
3D, NO to display in 2D.” Highlight Ye s  and press OK.
8 .  Put on your Theater 3D glasses and enjoy the movie!
You Will Need
     
						

							8
47
geTTiNg THe BesT 3D PiCTure
For the best 3D viewing experience, VIZIO recommends that you 
install the TV with the viewing distance and viewing angle in 
mind. When viewing 3D content, it is important that you view the 
TV straight-on, or some of the 3D effect may be lost.
For your TV, VIZIO recommends:
M3D650SV
Viewing Range: 7 - 10 feet
Optimal 
Distance: 8 feet
Illustrations in this section are not drawn to scale. They 
are for instructional purposes only.
Incorrect 3D Viewing Distance and Angle
In the example below, two of the viewers are sitting too close to 
the TV for a good 3D effect. In addition, the child on the floor is 
not seeing the best possible picture because he/she is looking 
up at the TV.
The viewers in the example below are not seeing the best 3D 
picture.
Eye Line
Correct 3D Viewing Distance and Angle
In the examples below, all of the viewers are experiencing the 
best possible 3D picture quality. 
In this example, the viewers are sitting at a good distance. They 
are viewing the TV straight-on, close to the ideal eye line. They will 
experience good 3D quality. 
In this example, the viewers have mounted the TV on a Tilt Mount. 
They are at the correct distance and they are viewing the TV 
straight-on, close to the ideal eye line. They will experience good 
3D picture quality.
Eye Line
Eye Line
Too Close - Losing 3D Effects
Best 3D - TV on Stand
Best 3D - Tilt Mounted
                  
						

							A
48
Troubleshooting & Technical Support
do you have questions?
Let us heLP!
youR PRoduCt inCLudes FRee LiFetiMe teCh  suPPoRt
Phone:
E mail:
We b :(877) 878-4946 (TOLL-FREE)
techsupport@
VIZIO.com
www.VIZIO.com/support
Hours of operation:  
M onday - Friday: 5 aM  TO 9 PM (PST)
S aturday - Sunday: 8 aM  TO 4 PM (PST)
The VIZIO support team is highly trained 
 
and is based in the United States. 
We can help with:
•  New Product Setup
•  Connecting Your  Devices
•  Technical Problems
•  and More
We speak English • Se habla Español • Nous parlons Français
  
						

							A
49
The TV displays “No Signal.”• Press the INPUT button on the remote control to select a 
different input source.
•  If you are using cable TV, satellite, or antenna 
connected directly to the TV, scan for channels. See 
Scanning for Channels on page 29 
There is no power. • Ensure the TV is plugged into a working electrical outlet.
•  Ensure the power cable is securely attached to the TV.
•  Press the Power/Standby button on the remote or on 
the side of the TV to turn the TV on.  
The power is on, but there is no image on the screen. • Ensure all cables are securely attached to the TV.
•  Ensure all devices are connected correctly. Devices 
differ; see your device’s user manual for details.
•  adjust Brightness, Contrast, or Backlight. See 
Resetting 
the Picture Settings on page 24
•  Press the INPUT button on the remote to select a 
different input source.   There is no sound.
• Press Volume Up on the remote control.
•  Press the MUTE button on the remote to ensure mute is 
off.
•  Check the audio settings. See 
adjusting the a udio 
Settings on page 24
 Ensure the speakers are set to 
On.
•  Ensure no headphones are connected to the TV.
•  Check the audio connections of external devices 
(Blu-ray player, game console, cable/satellite box) that 
are connected to the TV.
•  If you are using an antenna, the signal strength of the 
channel may be low. Ensure your antenna is connected 
securely to the TV and move the antenna around the 
room or close to a window for the best signal.
The colors on the TV don’t look right. • adust the Color and Tint settings in the Picture menu. 
See 
adjusting the Picture Settings on page 21
• Reset the picture settings. See Resetting the Picture 
Settings on page 24
•  Check all cables to ensure they are securely attached.  
The buttons on the remote aren’t working. • Ensure you are only pressing one button at a time.
•  Point the remote directly at the TV when pressing a 
button.
•  Replace the remote batteries with new ones. See 
Replacing the Batteries on page 11 
  
						

							A
50
The image quality is not good.• For the best image quality, view high-definition 
programs using digital sources. Connect your devices 
with HDMI cables.
•  If you are using an antenna, the signal strength of the 
channel may be low. Ensure your antenna is connected 
securely to the TV and move the antenna around the 
room or close to a window for the best signal.  
The picture is distorted. • Nearby electrical devices may be interfering with the 
TV. Separate the TV from electrical appliances, cars, or 
flourescent lights.
•  Ensure all cables are securely attached.  
The display image does not cover the entire screen. • If you are in RGB mode (computer), ensure that H-Size 
and V-Position in the on-screen menu are set correctly.
•  If you are using TV,  aV1,  aV2, or Component with 480i 
input, press the WIDE button on the remote to change 
the screen mode.  
The TV has pixels (dots) that are always dark or always lit. • Your HDTV is precision-manufactured using an extremely 
high level of technology. However, sometimes pixels may 
not display correctly. These types of occurences are 
inherent to this type of product and do not constitute a 
defective product.    I see “noise” or static on the screen.
• When your TV’s digital capabilities exceed a 
digital broadcast signal, the signal is up-converted 
(improved) to match your TV’s display capabilities. This 
up-converting can sometimes cause irregularities in the 
image.
•  If you are using an antenna, the signal strength of the 
channel may be low. Ensure your antenna is connected 
securely to the TV and move the antenna around the 
room or close to a window for the best signal.  
When I change input source, the volume changes. • The TV remembers the volume level on each input 
source. If the volume level on the new input source is 
higher or lower than the level on the source you switch 
from, the difference may be noticable.
•  Use the Volume Up/Down buttons on the remote to 
adjust the volume.  
When I change input source, the display image changes size. • The TV remembers the viewing mode on each input 
source. If the viewing mode on the new input source 
differs from the one on the input source you switch from, 
the difference may be noticable.
•  See 
Changing the Screen  aspect Ratio on page 19.
  
						

							B
51
Specifications
M3D650SV
Screen Size: 65” Class
Diagonal Viewable: 64.5”
Dimensions w/ Stand:  
w/o Stand: 60.85 x 40.88 x 16.10”
60.85 x 38.46 x 2.25”
Weight w/ Stand:  
w/o Stand: 104.94 lbs
 
92.81 lbs
TV Type: Edge Lit LED
Refresh Rate: 120 Hz
Maximum Resolution: 1920 x 1080
Pixel Pitch: .74 x .74mm
Dynamic Contrast Ratio: 1,000,000:1
Response Time: 5.5 ms
Brightness: 360 nits
2D Viewing  Angle: 178° (H) x 178° (V)
Ambient Light Sensor: Ye s
HDMI Inputs: 4
Component Video  Inputs: 1
Composite Inputs: 1 (Shared with Component)
RF/Coaxial Input: 1
USB Ports: 3
RGB Inputs: 1
OSD Language: English, Spanish, French
Audio Outputs: Optical, Stereo RCA
Number of Speakers 2M3D650SV
Watts/Channel 15W
Simulated Surround: SRS StudioSound,
 
Dolby Digital Plus
Volume Normalizer: SRS TruVolume
Certifications/ Compliance: Energy Star
 
CSA-US  
FCC Class B  
HDMI v1.4
Voltage Range: 100 - 240 VAC 
 
@ 50/60Hz
Power Consumption: 100.5 W (Average)
Standby Power   
Consumption: 
						

							C
52
Limited Warranty
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only. 
VIZIO provides a warranty to the original purchaser of a new Product 
against defects in materials and workmanship for a period of one (1) 
year of non-commercial usage and ninety (90) days of commercial 
use. If a Product covered by this warranty is determined to be defective 
within the warranty period, VIZIO will either repair or replace the Product 
at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical Support via e-mail: 
[email protected] or via phone at 877 MY VIZIO (877.698.4946) 
from 6:00AM to 9:00PM Monday through Friday and 8:00AM to 4:00PM 
Saturday and Sunday, Pacific Time, or visit www.VIZIO.com. PRE-AUTHOR-
IZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO 
SERVICE CENTER. Proof of purchase in the form of a purchase receipt or 
copy thereof is required to show that a Product is within the warranty 
period.
Parts and Labor
There will be no charge for parts or labor during the warranty period. 
Replacement parts and Products may be new or recertified at VIZIO’s 
option and sole discretion. Replacement parts and Products are 
warranted for the remaining portion of the original warranty or for ninety 
(90) days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain 
warranty service. VIZIO is not responsible for transportation costs to the 
service center, but VIZIO will cover return shipping to the customer. PRE-
AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO 
SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original 
carton box and shipping material or packaging that affords an equal 
degree of protection. VIZIO Technical Support will provide instructions for 
packing and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and 
workmanship. This warranty does not cover, for example: cosmetic 
damage, normal wear and tear, improper operation, improper voltage 
supply or power surges, signal issues, damages from shipping, acts of 
God, any type of customer misuse, modifications or adjustments, as well 
as installation and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable 
or removed serial numbers, or requiring routine maintenance are not 
covered. This one year limited warranty does not cover Products sold 
“AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR 
DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED 
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET 
FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND 
DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S 
NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH 
DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE 
PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR 
LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST 
REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL 
DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG 
AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS 
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL 
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM 
STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE. 
CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.
Personal Data
If your VIZIO product is capable of storing personal data and other 
information, ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE 
COURSE OF SOME IN-HOME AND ALL SHIP-IN WARANTY SERVICE. If this 
occurs, your product will be restored to you configured as originally 
purchased. You will be responsible for restoring all applicable data and 
passwords. Recovery and reinstallation of user data is not covered under 
this Limited Warranty. In order to protect your personal information, VIZIO 
recommends that you always clear all personal information from the 
unit before it is serviced, regardless of the servicer.
Zero Bright Pixel Defect Guarantee
This policy covers “zero bright pixel” defects for the duration of the limited 
“ONE YEAR WARRANTY” on select new product purchases. To determine 
if this guarantee applies to your product, refer to the “DETAILS” tab of 
the model’s product information page (www.VIZIO.com) or look for the 
“zero bright pixel” guarantee on the box.
  
						

							D
53
Legal & Compliance
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy, and if not installed and used in 
accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:1 . Reorient or relocate the receiving antenna.
2 .  Increase the separation between the equipment and receiver.
3 .  Connect the equipment into an outlet on a circuit different from 
that to which the receiver is connected.
4 .  Consult the dealer or an experienced radio/TV technician for 
help.
This device complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions: (1) this device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.
Notice 1 . The changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to 
operate the equipment.
2 .  Shielded interface cables and AC power cord, if any, must be used 
in order to comply with the emission limits.
3 .  The manufacturer is not responsible for any radio or TV 
interference caused by unauthorized modification to this 
equipment. It is the responsibilities of the user to correct such 
interference.
FCC warning
Changes or modifications not expressly approved by the party responsible 
for compliance with the FCC Rules could void the user’s authority to operate 
this equipment.Caution
Always use an AC/DC power adapter that is properly grounded. Use the AC 
cords listed below for each area. USA: U L
Canada: CSA
Germany: VDE
UK: BASE/BS
Japan: Electric Appliance Control Act
Open Source Software Notice
Your VIA device may contain GPL executables and LGPL libraries that are 
subject to the PL2.0/LGPL2.1 License Agreements. VIZIO offers to provide 
source code to you on CD-ROM for a processing fee covering the cost 
of performing such distribution, such as the cost of media, shipping and 
handling upon request made to VIZIO at www.VIZIO.com.
This offer is valid for a period of three (3) years from the date of the 
distribution of this VIA device by VIZIO. 
You can obtain a copy of the GPL, LGPL licenses from:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
and
http://www.gnu.org/licenses/oldlicenses/lgpl-2.1.html
You can also obtain a copy of gSOAP public license from: 
http://www.cs.fsu.edu/~engelen/license.html
Please visit www.VIZIO.com for attribution of copyrights to any open source 
software on your VIZIO VIA device.
Permission is hereby granted, free of charge, to any person obtaining a 
copy of any such software and associated documentation files (the “Open 
Source Software”), to deal in the Open Source Software without restriction, 
including without limitation the rights to use, copy, modify, merge, publish, 
distribute, sublicense, and/or sell copies of the Open Source Software, and 
to permit persons to whom the Open Source Software is furnished to do so, 
subject to the following conditions:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, 
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 
ERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGE-
MENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE 
FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF 
CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION 
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.