VIZIO M3d650sv User Guide

							1
4
To install the TV stand:
1 . Place the TV screen-down on a clean, flat surface. To prevent 
scratches or damage to the screen, place the TV on a soft 
surface, such as carpet, rug, or blanket.
2 .  Push the stand neck into the bottom of the base as shown. 
Insert and tighten 8 screws as shown.
3 .  Attach the cover to the stand neck with two   
screws as shown.
4 .  Attach the assembled stand to the back of the tv with four 
screws as shown.
5 .  To ensure proper ventilation, leave at least 1” of space 
between the back of the TV and any other objects (walls, 
etc).  
Step 2Step 3
Step 4
                                   
						

							Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult 
the information below to find the appropriate mount for your TV 
model:Installing a TV on a wall requires lifting. To prevent 
injury or damage to the TV, ask someone to help you.
M3D650SV
Screw Size: M8
Screw Length: 20mm
Screw Pitch: 1.25mm
Hole Pattern: 400mm (V) x 600mm (H)
Be sure the mount you choose is capable of supporting the 
weight of the TV. After you have determined that you have the 
correct mount for your TV, you can begin the installation.
To install yovur TV on a wall:
1 .  Disconnect any cables connected to your TV.
2 .  Place the TV face-down on a clean, flat, stable surface. 
Be sure the surface is clear of debris that can scratch or 
damage  the TV.
3 .  Remove the base by loosening and removing the screws.
4 .  Attach your TV and wall mount to the wall, carefully following 
the instructions that came with your mount.  
 
Use only with a UL-listed wall mount bracket rated for the 
weight/load of this TV. See 
Appendix A - Specifications for 
the weight of this TV.
 
						

							2
6
Controls and Connections
ReaR Panel
Ethernet - Connect ethernet cable from home network. Coaxial - Connect coaxial cable from cable, satellite, or 
antenna. Optical Audio Out - Connect optical/SPDIF audio 
device, such as home audio receiver.
Stereo Audio Out - Connect RCA cable to audio 
device such as sound bar. HDMI - Connect HDMI device. USB - Connect USB thumb drive to play media.
RGB - Connect PC. Connect 3.5mm to PC audio source. Component/Compsite - Connect component or 
composite device.
  
						

							2
7
POWER
Press the Jag Wheel once to turn the TV on.
Press and hold the Jag Wheel for three seconds to turn the TV off.
VOLUME UP/DOWN
Turn the Jag Wheel to increase or decrease volume level.
Jag Wheel
USInG The JaG Wheel
The  Jag Wheel is an innovative, all-in-one control on the side of 
your HDTV that performs functions you might see as buttons on 
other TVs. Functions including volume up/down, power, input 
source, and channel up/down have been combined into a 
single Quick Menu controlled by the Jag Wheel.
Using the Quick Menu
To open the Quick Menu, press the Jag Wheel. Turn the Jag 
Wheel to highlight a function. Press the Jag Wheel to select the 
highlighted function.
Volume: Select to increase or decrease volume.
Channel: Open the channel list and select a channel.
Input Source: Change the input device.
Exit: Close the Quick Menu.
Power Off: Turn  the TV  off.
The Quick Menu closes automatically after 10 seconds if no 
activity is detected.
Quick Menu
  
						

							2
8
FR onT Panel
Front Panel
REMOTE SENSOR   
When using the remote, aim it 
directly at this sensor.
VIZIO LOGO   
When the TV is on, this light is on.
            
						

							2
9
RemoTe ConTRol - FRonT
Remote Control
INPUTINPUT
INFOCC
MENU
GUIDE
1
4
7 2
5
8
0
\fD
\f
CH
CHVOL
VOL
\b9
BACK
EXIT
OK
INFOCC
MENU
GUIDE
1
4
7 2
5
8
0
\fD
\f
CH
CHVOL
VOL
\b9
BACK
EXIT
OK
InPUT 
Change the currently-displayed input.
aRR oW  
Navigate the on-screen menu.exIT 
Close the on-screen menu. CloSed CaPTIonS 
Open the closed caption menu.
a/V ConTR olS 
Control USB media player.
3d 
Switch the 3D display mode.
mUTe 
Turn the audio off or on.
BaCk  
Go to the previous on-screen menu. PoWeR
 
Turn TV on or off.
menU 
Display the on-screen menu.
InFo  
Display the info window.
daSh 
Use with number pad to manually enter 
a digital sub-channel. (For example, 
18-4 or 18-5.) Channel UP/doWn 
Change the channel. GUIde 
Display the info window.
laST 
Return to the channel last viewed.
nUmBeR  Pad 
Manually enter a channel.
VolUme UP/doWn 
Increase or decrease loudness of the audio.
ok 
Select the highlighted menu option.
V BUTTon 
Open the VIA dock.
aPP laUnCheR 
Quickly launch the pictured app.
BaTTeR y ComPaRTmenT 
Insert 2 AAA batteries here.
              
						

							2
10
RemoTe ConTRol - BaCk
Remote Control - Back
aRRoW 
Navigate the on-screen menu.
ShIFT 
Press and hold while pressing 
another key to enter a capital letter.
alT 
Press and hold while pressing another key to 
enter a blue character. For example, press 
ALT and W to enter a # character.V.I.a. ShoRTCUT BUTTonS 
Control VIZIO Internet Apps
do noT CoVeR  ThIS aRea 
This is the transmitter.
                
						

							2
11
Replacing the Batteries
1 . Remove the battery cover.
2 .  Insert two batteries into the remote control. Make sure that 
the (+) and (-) symbols on the batteries match the (+) and 
(-) symbols inside the battery compartment.
3 .  Replace the battery cover.
INPUT
INPUT
INFO
CC
MENU
GUIDE1
4
7 2
5
8
0
\fD
\f
CH
CH
VOL
VOL
\b9
BACK
EXIT
OK
INFO
CC
MENU
GUIDE1
4
7 2
5
8
0
\fD
\f
CH
CH
VOL
VOL
\b9
BACK
EXIT
OKAAA BATTERY
AAA BATTERY
AAA BATTERY
AAA BATTERY
CHANGING THE  BATTERIES
•	 Use only good quality batteries.
•	 Inserting the batteries incorrectly may result in 
cracking or leakage that may cause a fire or 
result in injury.
•	 Dispose of old or dead batteries in accordance 
with local hazardous waste regulations.
•	 Keep batteries away from children and pets.
  
						

							3
12
Connecting Your Devices
ConneCting A DeviCe
CONNECTING A DEVICE
BeSt
HDMi CABLe• DIGITAL 
• HD VIDEO (1080p)* 
• HD AUDIO
gooD
Av CABLe • ANALOG 
• VIDEO (480i)* 
• STEREO AUDIO
BETTER
CoMPonent CABLe • ANALOG 
• HD VIDEO (1080i)* 
• STEREO AUDIO
* Maximum Resolution
Game Console
Cable/Satellite Box
DVD/Blu-ray Player
Your TV can be used to display output from most devices. 
1 . 
Verify that your device has a video port that matches an 
available port on the TV (HDMI, Component, etc).
2 .  Turn the TV and your device off.
3 .  Connect the appropriate cable (not included) to the TV and 
the device.
4 .  Turn the TV and your device on. Set the TV’s input to match 
the connection you used (HDMI-1, HDM1-2, etc).
    
						

							3
13
CONNECTING A PC
ConneCting A PC
RGB Cable (For Video) 3.5mm Cable (For Audio)
Your TV can be used to display output from a personal computer.
To use your TV as a PC display:
1 . 
Connect an RGB cable (not included) to your PC and the 
RGB port on the back of the TV. This cable transmits video. 
2 .  Connect a 3.5mm cable (not included) to your PC and the 
PC Audio In port on the back of the TV. This cable transmits 
audio. 
3 .  Set your PC’s resolution to match the resolution of your TV. 
See 
Appendix B - Specifications.Personal Computer