VIZIO M3d650sv User Guide

1
4
To install the TV stand:
1 . Place the TV screen-down on a clean, flat surface. To prevent 
scratches or damage to the screen, place the TV on a soft 
surface, such as carpet, rug, or blanket.
2 .  Push the stand neck into the bottom of the base as shown. 
Insert and tighten 8 screws as shown.
3 .  Attach the cover to the stand neck with two   
screws as shown.
4 .  Attach the assembled stand to the back of the tv with four 
screws as shown.
5 .  To ensure proper ventilation, leave at least 1” of...

Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult 
the information below to find the appropriate mount for your TV 
model:Installing a TV on a wall requires lifting. To prevent 
injury or damage to the TV, ask someone to help you.
M3D650SV
Screw Size: M8
Screw Length: 20mm
Screw Pitch: 1.25mm
Hole Pattern: 400mm (V) x 600mm (H)
Be sure the mount you choose is capable of supporting the 
weight of the TV. After you have determined that you have the 
correct mount...

2
6
Controls and Connections
ReaR Panel
Ethernet - Connect ethernet cable from home network. Coaxial - Connect coaxial cable from cable, satellite, or 
antenna. Optical Audio Out - Connect optical/SPDIF audio 
device, such as home audio receiver.
Stereo Audio Out - Connect RCA cable to audio 
device such as sound bar. HDMI - Connect HDMI device. USB - Connect USB thumb drive to play media.
RGB - Connect PC. Connect 3.5mm to PC audio source. Component/Compsite - Connect component or 
composite device.
  

2
7
POWER
Press the Jag Wheel once to turn the TV on.
Press and hold the Jag Wheel for three seconds to turn the TV off.
VOLUME UP/DOWN
Turn the Jag Wheel to increase or decrease volume level.
Jag Wheel
USInG The JaG Wheel
The  Jag Wheel is an innovative, all-in-one control on the side of 
your HDTV that performs functions you might see as buttons on 
other TVs. Functions including volume up/down, power, input 
source, and channel up/down have been combined into a 
single Quick Menu controlled by the Jag...

2
8
FR onT Panel
Front Panel
REMOTE SENSOR   
When using the remote, aim it 
directly at this sensor.
VIZIO LOGO   
When the TV is on, this light is on.
            

2
9
RemoTe ConTRol - FRonT
Remote Control
INPUTINPUT
INFOCC
MENU
GUIDE
1
4
7 2
5
8
0
\fD
\f
CH
CHVOL
VOL
\b9
BACK
EXIT
OK
INFOCC
MENU
GUIDE
1
4
7 2
5
8
0
\fD
\f
CH
CHVOL
VOL
\b9
BACK
EXIT
OK
InPUT 
Change the currently-displayed input.
aRR oW  
Navigate the on-screen menu.exIT 
Close the on-screen menu. CloSed CaPTIonS 
Open the closed caption menu.
a/V ConTR olS 
Control USB media player.
3d 
Switch the 3D display mode.
mUTe 
Turn the audio off or on.
BaCk  
Go to the previous on-screen menu. PoWeR...

2
10
RemoTe ConTRol - BaCk
Remote Control - Back
aRRoW 
Navigate the on-screen menu.
ShIFT 
Press and hold while pressing 
another key to enter a capital letter.
alT 
Press and hold while pressing another key to 
enter a blue character. For example, press 
ALT and W to enter a # character.V.I.a. ShoRTCUT BUTTonS 
Control VIZIO Internet Apps
do noT CoVeR  ThIS aRea 
This is the transmitter.
                

2
11
Replacing the Batteries
1 . Remove the battery cover.
2 .  Insert two batteries into the remote control. Make sure that 
the (+) and (-) symbols on the batteries match the (+) and 
(-) symbols inside the battery compartment.
3 .  Replace the battery cover.
INPUT
INPUT
INFO
CC
MENU
GUIDE1
4
7 2
5
8
0
\fD
\f
CH
CH
VOL
VOL
\b9
BACK
EXIT
OK
INFO
CC
MENU
GUIDE1
4
7 2
5
8
0
\fD
\f
CH
CH
VOL
VOL
\b9
BACK
EXIT
OKAAA BATTERY
AAA BATTERY
AAA BATTERY
AAA BATTERY
CHANGING THE  BATTERIES
•	 Use only good quality...

3
12
Connecting Your Devices
ConneCting A DeviCe
CONNECTING A DEVICE
BeSt
HDMi CABLe• DIGITAL 
• HD VIDEO (1080p)* 
• HD AUDIO
gooD
Av CABLe • ANALOG 
• VIDEO (480i)* 
• STEREO AUDIO
BETTER
CoMPonent CABLe • ANALOG 
• HD VIDEO (1080i)* 
• STEREO AUDIO
* Maximum Resolution
Game Console
Cable/Satellite Box
DVD/Blu-ray Player
Your TV can be used to display output from most devices. 
1 . 
Verify that your device has a video port that matches an 
available port on the TV (HDMI, Component, etc).
2 .  Turn the...

3
13
CONNECTING A PC
ConneCting A PC
RGB Cable (For Video) 3.5mm Cable (For Audio)
Your TV can be used to display output from a personal computer.
To use your TV as a PC display:
1 . 
Connect an RGB cable (not included) to your PC and the 
RGB port on the back of the TV. This cable transmits video. 
2 .  Connect a 3.5mm cable (not included) to your PC and the 
PC Audio In port on the back of the TV. This cable transmits 
audio. 
3 .  Set your PC’s resolution to match the resolution of your TV. 
See...