Vizio E3d470vx Lcd Hdtv User Manual

2
1E3D320VX	/	E3D420VX	/	E3D470VX
To install your TV on a wall:
1. Disconnect any cables connected to 
your TV. 
 
 
 
 
 
2.  Place the TV face-down on a clean, 
flat, stable surface. Be sure the surface 
is clear of debris that can scratch or 
damage the TV. 
 
 
 
3.  Using a Phillips-head screwdriver, 
remove the base by loosening and 
removing the screws. 
 
 
 
 
4.  Attach your TV and wall mount to the wall, carefully following the 
instructions that came with your mount. 
 
Use only with a...

1
3
E3D320VX	/	E3D420VX	/	E3D470VX
Installing Your TV for 3D Viewing
For the best viewing experience, VIZIO recommends that you install the TV with 
the viewing distance and viewing angle in mind. When viewing 3D content, it is 
important that you view the TV straight-on, or some of the 3D effect may be lost.
For your TV, VIZIO recommends:
E3D320VX E3D420VXE3D470VX
Viewing Range:4 - 6.5 feet5 - 8 feet6 - 9 feet
Optimal Distance: 5 feet6.5 feet 7.5 feet
Illustrations in this section are not drawn to...

2
4
Controls and Connections
Left Side Panel
Left Side Panel
Power
Menu
Channel Up
Volume Up
Input
Channel Down
Volume Down
USB (1,2)
HDMI (Side)
Power: Turn the TV on or off.
Menu: Display on-screen menu.
Channel Up/Down: Change the channel.
Volume Up/Down: Increase or decrease the loudness of the TVs audio.
Input: Change the input device. With each press of the  
button, the TV will display a different input source
HDMI (Side): Connect HDMI device.
USB (1,2): Connect a USB drive to play music or...

2
5
E3D320VX / E3D420VX / E3D470VX
Remote Control
Remote Control 
Power/Standby
A/V Controls
Info
Menu
Arrow
Channel Up/DownLast
Number Pad
3D
Mute
Volume Up/Down
OK
Exit
Input
Guide
Back
V Button
Dash (-)
CC
VIA Shortcuts
App Launcher
QWERTY Keypad
Arrow VIA Shortcuts
Battery Compartment
Power/Standby:Turn the TV on or off.
Input: Change the input device.
App Launcher: Launch the VOD (VIZIO On-Demand), Netflix, or 
VUDU App.
A/V Controls: Control external device (CEC-enabled devices only).
Info: Display...

6
2E3D320VX / E3D420VX / E3D470VX
VIA Shortcut Buttons
VIA Shortcut Buttons
Move/Delete App from VIA DockChange Screen Size   
(when VIA Sidebar is open) View Settings for Active VIA App
Exit App/Exit VIA Dock
Replacing the Batteries
1.  Open the battery cover.
2.  Insert two AAA batteries into the 
remote control. Make sure that the (+) 
and (-) symbols on the batteries match 
the (+) and (-) symbols inside the 
battery compartment.
3.  Close the battery cover. 
 
 
 
 
 
• Use only good quality...

3
7
Connecting Your Devices
Your HDTV can be easily connected to an external device:•	DVD	or	Blu-Ray	player
•	 Video	game	console
•	 Cable	box
•	 External	antenna
•	 Or	other	device
Before You Begin
To connect a device to the HDTV:
1. Verify that the device has one of the following types of video ports 
available: 
Required	Device	Ports
HDMI RGB
RF/Antenna
Component
Composite	AV
2.  Ensure the TV has a matching port available.
3.  Ensure you have a cable that matches the available port. For example, if...

8
3E3D320VX	/	E3D420VX	/	E3D470VX
Select One:
OR
OROR
OR
BETTER GOODBEST
HDMI
RF /
C OAXIAL
RGB
C OMPONENT
C OMPOSITE
AV DIGIT
AL
DIGIT AL /
ANAL OG
ANAL OG
ANAL OG
ANAL OG
Device	Connection	Chart
Select	one	of	the	connection	types.	
	
Use	the	cable(s)	shown	to	connect	 	
the	TV	to	your	device.  

3
9
E3D320VX	/	E3D420VX	/	E3D470VX
Setting Up Your Network Connection
Your TV is internet-ready, and can be connected to your home network in two 
ways:•	Wired,	using	the	RJ45	(ethernet)	connector	on	the	back	panel
•	 Wirelessly,	using	your	home	wireless	network
Once you have connected to your home network and the Internet, you can use 
VIA apps to deliver popular online content to your TV. 
Connecting	to	A	Wired	Network
To connect to a wired network:
1.  Ensure you have:
•	An	ethernet	cable	long	enough...

4
10
Completing the First-Time Setup
The first time you turn on the TV, the Setup App will guide you through each of the 
steps necessary to get your TV ready for use.
Before you begin the first-time setup:•	Your	TV	should	be	installed	and	the	power	cord	should	be	connected	
to	an	electrical	outlet.	See	
Installing	the	TV	on	page	1.
•	 Your	devices	should	be	connected.	See	
Connecting	Your	Devices	on	
page	7.
•	 If	you	have	a	wireless	network,	have	the	network	key	ready.
•	 If	you	are	connecting	to	your...

5
11
Using the On-Screen Menu
Your TV features an easy-to-use on-screen menu. 
To open the on-screen menu, press the MENU button on the remote. You can 
also open the on-screen menu by pressing the VIA button and selecting HDTV 
Settings from the VIA Dock, then pressing OK.
From this menu, you can:
•	Change	the	3D	mode
•	 Set	the	screen	aspect	radio
•	 Set	up	closed	captioning
•	 Activate	the	sleep	timer	
•	 Adjust	the	picture	settings
•	 Adjust	the	audio	settings
•	 Adjust	the	network	settings
•	 Change...