Vizio E3d470vx Lcd Hdtv User Manual

							2
1E3D320VX	/	E3D420VX	/	E3D470VX
To install your TV on a wall:
1. Disconnect any cables connected to 
your TV. 
 
 
 
 
 
2.  Place the TV face-down on a clean, 
flat, stable surface. Be sure the surface 
is clear of debris that can scratch or 
damage the TV. 
 
 
 
3.  Using a Phillips-head screwdriver, 
remove the base by loosening and 
removing the screws. 
 
 
 
 
4.  Attach your TV and wall mount to the wall, carefully following the 
instructions that came with your mount. 
 
Use only with a UL-listed wall mount bracket rated for the weight/load o\
f 
this TV. See 
Appendix A - Specifications for the weight of this TV.
4. To ensure proper ventilation, leave at 
least 1” of space between the back of 
the TV and any other objects (walls, 
etc). 
 
 
 
 
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult the information 
below to find the appropriate mount for your TV model:
E3D320XV E3D420XVE3D470XV
Screw Size:M6M6M6
Screw Length: 20mm18mm20mm
Screw Pitch: 1.0mm 1.0mm1.0mm
Hole Pattern: 200mm (V) 
 
x 200mm (H) 200mm (V) 
 
x 200mm (H) 200mm (V) 
 
x 400mm (H)
Installing a TV on a wall requires lifting. To prevent injury or damage 
to the TV, ask someone to help you.
Be sure the mount you choose is capable of supporting the weight of the TV. After 
you have determined that you have the correct mount for your TV, you can begin 
the installation.
1”  
						

							1
3
E3D320VX	/	E3D420VX	/	E3D470VX
Installing Your TV for 3D Viewing
For the best viewing experience, VIZIO recommends that you install the TV with 
the viewing distance and viewing angle in mind. When viewing 3D content, it is 
important that you view the TV straight-on, or some of the 3D effect may be lost.
For your TV, VIZIO recommends:
E3D320VX E3D420VXE3D470VX
Viewing Range:4 - 6.5 feet5 - 8 feet6 - 9 feet
Optimal Distance: 5 feet6.5 feet 7.5 feet
Illustrations in this section are not drawn to scale. They are for 
instructional purposes only.
Incorrect 3D Viewing Distance and Angle
In the example below, two of the viewers are sitting too close to the TV for a good 
3D effect. In addition, the child on the floor is not seeing the best possi\
ble picture 
because he/she is looking up at the TV.
The viewers in the example below are not seeing the best 3D picture.
Too	Close	-	Losing	3D	Effects
Eye Line Correct 3D Viewing Distance and Angle
In the examples below, all of the viewers are experiencing the best possible 3D 
picture quality. 
Best	3D	-	TV	on	Stand
Eye Line
In this example, the viewers are sitting at a good distance. They are viewing the 
TV straight-on, close to the ideal eye line. They will experience good 3\
D quality.   
 
Best	3D	-	Tilt	Mounted
Eye Line
In this example, the viewers have mounted the TV on a Tilt Mount. They are at 
the correct distance and they are viewing the TV straight-on, close to the ideal 
eye line. They will experience good 3D picture quality.                  
						

							2
4
Controls and Connections
Left Side Panel
Left Side Panel
Power
Menu
Channel Up
Volume Up
Input
Channel Down
Volume Down
USB (1,2)
HDMI (Side)
Power: Turn the TV on or off.
Menu: Display on-screen menu.
Channel Up/Down: Change the channel.
Volume Up/Down: Increase or decrease the loudness of the TVs audio.
Input: Change the input device. With each press of the  
button, the TV will display a different input source
HDMI (Side): Connect HDMI device.
USB (1,2): Connect a USB drive to play music or photos.
Rear Panel
Rear Panel
HDMI (1, 2)
RCA Audio In 
(For use with  HDMI ports)
Component RCA Audio Out Optical  
Audio Out Cable/ 
Antenna
RGB PC
PC Audio In
Composite AV
AC IN
Ethernet
HDMI (3)
E3D470VX  ONLY
RGB PC: Connect RGB cable from computer.
PC Audio In: Connect 3.5mm connector from computer.
Ethernet: Connect ethernet cable from home network.
Composite AV: Connect composite video/audio device.
Cable/Antenna: Connect RF/Coaxial connector from cable or antenna.
Optical Audio Out: Connect SPDIF/Optical audio cable.
RCA Audio Out: Connect RCA audio device (soundbar, etc).
Component: Connect component video/audio device.
RCA Audio In: Connect audio for an HDMI input.
HDMI (1,2): Connect HDMI devices.
AC IN: Connect the included power adapter.  
						

							2
5
E3D320VX / E3D420VX / E3D470VX
Remote Control
Remote Control 
Power/Standby
A/V Controls
Info
Menu
Arrow
Channel Up/DownLast
Number Pad
3D
Mute
Volume Up/Down
OK
Exit
Input
Guide
Back
V Button
Dash (-)
CC
VIA Shortcuts
App Launcher
QWERTY Keypad
Arrow VIA Shortcuts
Battery Compartment
Power/Standby:Turn the TV on or off.
Input: Change the input device.
App Launcher: Launch the VOD (VIZIO On-Demand), Netflix, or 
VUDU App.
A/V Controls: Control external device (CEC-enabled devices only).
Info: Display the Info Window.
CC: Open the Closed Captioning menu.
Menu: Display the on-screen menu.
Exit: Close the on-screen menu.
Arrow: Navigate the on-screen menu and episode guide.
OK: Select highlighted menu option.
Guide: Display the episode guide (digital channels only).
Back: Go to the previous on-screen menu options.
VIA Shortcuts: Control VIZIO Internet Apps.
Channel Up/Down: Change the channel. With each press of the button, 
the channel will increase or decrease by one.
Volume Up/Down: Increase or decrease the loudness of the TV’s audio.
V Button: Start VIA Internet Apps.
Mute: Turn the sound off or on. When mute is activated, the 
TV’s audio is turned off.
Last: Return to the channel last viewed.
Number Pad: Use the number pad to manually enter a channel.
Dash (-): Use with number pad to manually enter a digital  
sub-channel. (For example, 18-4 or 18-5.)
3D: Activate 3D content.
QWERTY Keypad: Enter letters and numbers.  
						

							6
2E3D320VX / E3D420VX / E3D470VX
VIA Shortcut Buttons
VIA Shortcut Buttons
Move/Delete App from VIA DockChange Screen Size   
(when VIA Sidebar is open) View Settings for Active VIA App
Exit App/Exit VIA Dock
Replacing the Batteries
1.  Open the battery cover.
2.  Insert two AAA batteries into the 
remote control. Make sure that the (+) 
and (-) symbols on the batteries match 
the (+) and (-) symbols inside the 
battery compartment.
3.  Close the battery cover. 
 
 
 
 
 
• Use only good quality batteries.
• Inserting the batteries incorrectly may result in cracking or leakage   
   that may cause a fire or result in injury.
• Dispose of old or dead batteries in accordance with local hazardous   
   waste regulations.
• Keep batteries away from children and pets.
Front Panel
Front Panel
Remote Control  Sensor
Remote Control Sensor: When using the remote, point it directly at this 
sensor.  
						

							3
7
Connecting Your Devices
Your HDTV can be easily connected to an external device:•	DVD	or	Blu-Ray	player
•	 Video	game	console
•	 Cable	box
•	 External	antenna
•	 Or	other	device
Before You Begin
To connect a device to the HDTV:
1. Verify that the device has one of the following types of video ports 
available: 
Required	Device	Ports
HDMI RGB
RF/Antenna
Component
Composite	AV
2.  Ensure the TV has a matching port available.
3.  Ensure you have a cable that matches the available port. For example, if 
you are connecting a Blu-ray player with an HDMI port, be sure you have 
an HDMI cable.
Connecting Your Devices
Once you have determined the best available connection type on both your\
 
device and the TV, ensure you have the corresponding cable.
To connect a device to the TV:
1. Ensure both the TV and your device are off.
2.  Connect the device and the TV. Use the best available connection. See the 
Device Connection Chart on the next page. 
 
Ensure each end of the cable is securely connected.
3.  Turn the TV on by pressing the Power/Standby button on the remote.
4.  Turn your device on.
5.  When you are ready to use your newly connected device, press the INPUT 
button on the remote and select the connection type (HDMI, RGB, etc) from 
the on-screen menu. Press OK.
6.  Check the list of devices/connection types below for special instruction\
s:  
•	 Cable	TV	(without	cable	box/directly	from	wall)	
Perform	a	channel	scan.		
•	 RGB	
Make	sure	the	desktop	resolution	on	the	PC	is	set	to	1920	x	1080.	Set	
the	Screen	Mode	to	Normal.		
•	 DVD	Player	with	DVI	
Connect	left	(white)	and	right	(red)	audio	cables	to	the	L	and	R	ports	
next	to	the	HDMI	ports	on	the	TV.  
						

							8
3E3D320VX	/	E3D420VX	/	E3D470VX
Select One:
OR
OROR
OR
BETTER GOODBEST
HDMI
RF /
C OAXIAL
RGB
C OMPONENT
C OMPOSITE
AV DIGIT
AL
DIGIT AL /
ANAL OG
ANAL OG
ANAL OG
ANAL OG
Device	Connection	Chart
Select	one	of	the	connection	types.	
	
Use	the	cable(s)	shown	to	connect	 	
the	TV	to	your	device.  
						

							3
9
E3D320VX	/	E3D420VX	/	E3D470VX
Setting Up Your Network Connection
Your TV is internet-ready, and can be connected to your home network in two 
ways:•	Wired,	using	the	RJ45	(ethernet)	connector	on	the	back	panel
•	 Wirelessly,	using	your	home	wireless	network
Once you have connected to your home network and the Internet, you can use 
VIA apps to deliver popular online content to your TV. 
Connecting	to	A	Wired	Network
To connect to a wired network:
1.  Ensure you have:
•	An	ethernet	cable	long	enough	to	reach	your	TV
•	 A	router	or	modem	with	an	available	ethernet	port
•	 A	high-speed	internet	connection
2.  Connect your ethernet cable to the router and to the ethernet port on the 
back of the TV.
3.  Use the Guided Network Setup to configure the TV. See 
Using Guided 
Setup
 on page 29.
Connecting	to	a	Wireless	Network
To connect to a wireless network:
1.  Ensure you have:
•	A	router	broadcasting	a	high-speed	wireless	signal	(wireless-n	
recommended)
•	 A	high-speed	internet	connection
2.  Use the Guided Network Setup to configure the TV. See 
Using Guided 
Setup
 on page 29.  
						

							4
10
Completing the First-Time Setup
The first time you turn on the TV, the Setup App will guide you through each of the 
steps necessary to get your TV ready for use.
Before you begin the first-time setup:•	Your	TV	should	be	installed	and	the	power	cord	should	be	connected	
to	an	electrical	outlet.	See	
Installing	the	TV	on	page	1.
•	 Your	devices	should	be	connected.	See	
Connecting	Your	Devices	on	
page	7.
•	 If	you	have	a	wireless	network,	have	the	network	key	ready.
•	 If	you	are	connecting	to	your	network	with	an	ethernet	cable,	connect	it	
to	the	ethernet	port	on	the	TV.	
To complete the first-time setup:
1.  Press the Power/Standby button on 
the remote. The TV powers on and the 
Setup App starts. 
 
 
 
 
2.  Use the Up/Down Arrow buttons on 
the remote to highlight Home Mode 
Setup and press OK. 
 
 
 
 
3.  Use the OK and Arrow Up/Down 
buttons on the remote to read and 
accept the Terms of Service and 
Privacy Policy for Yahoo! TV Widgets.  
 
When you are finished, highlight Next 
and press OK.
4. Select the name of your wireless 
network from the list of available 
networks and press OK. 
 
Enter the network key using the 
on-screen keyboard, then highlight 
Connect and press OK.
 
If the TV is connected to your network via an Ethernet cable, you will 
not see this screen. The TV will connect to your network automatically.
If you are not connecting your TV to your network, you can skip this 
step. Highlight Skip and press OK.
5.  Enter your First Name, Last Name, 
Phone Number, ZIP Code, and E-mail 
Address using the on-screen keyboard. 
 
Highlight Next and press OK. 
 
 
6.  Answer the on-screen questions about 
your TV connection using the Arrow 
and OK buttons on the remote. 
 
 
 
 
 
7.  When you have finished the channel 
scan, highlight Exit to Live TV and 
press OK. 
The First-Time Setup is complete.  
						

							5
11
Using the On-Screen Menu
Your TV features an easy-to-use on-screen menu. 
To open the on-screen menu, press the MENU button on the remote. You can 
also open the on-screen menu by pressing the VIA button and selecting HDTV 
Settings from the VIA Dock, then pressing OK.
From this menu, you can:
•	Change	the	3D	mode
•	 Set	the	screen	aspect	radio
•	 Set	up	closed	captioning
•	 Activate	the	sleep	timer	
•	 Adjust	the	picture	settings
•	 Adjust	the	audio	settings
•	 Adjust	the	network	settings
•	 Change	TV	settings
•	 Access	the	help	menu	
	
	
	
	
Navigating the On-Screen Menu
To open the on-screen menu, press the 
MENU button on the remote. 
Use the Arrow buttons to highlight a menu 
option, and press the OK button to select 
that option. 
 
 
 
 
While navigating the on-screen menu, you can press the BACK 
button at any time to return to the previous menu screen. The EXIT 
button will close the on-screen menu.
Changing the 3D Mode
To correctly view 3D content, you must set the 3D mode to match the 3D format 
of the content.
To change the 3D mode:
1. Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote 
to highlight the 3D icon and press OK. 
The Output Mode menu is displayed.
3.  If viewing 2D content, highlight 2D and press OK. The menu closes. 
 
If viewing 3D content, highlight 3D and press OK. Go to step 4.
4.  Select the 3D mode to match the content you are watching:
•	SBS	-	Displays	side-by-side	3D.
•	 TB	-	Displays	top/bottom	3D.
•	 Sensio	-	Displays	Sensio	3D.
5.  The TV displays, “3D viewing mode enabled. Please wear 3D glasses.”\
 Put 
on your 3D glasses.
You can also quickly change the 3D display mode by pressing the 
3D button on the remote.