Vizio E322MV Razor Led Lcd Hdtv User Manual

							6
23
E322MV
Adjusting the Noise Reduction Setting
Noise reduction diminishes artifacts such as “blockiness” or “pixellat\
ion”. When 
activated, the resulting picture usually has softer edges.
To adjust the noise reduction setting:
1. Press the OK button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight 
Picture and press OK.
3.  Use the Arrow buttons to highlight 
Noise Reduction and press  
OK.
4.  Use the Arrow buttons to highlight Off , 
Low, Medium, or High, then press 
OK.
5.  Press EXIT. 
 Adjusting the Color Temperature
Color temperature changes the “warmness” or “coolness” of the white areas of 
the picture.
To adjust this setting, Picture Mode must be set to Custom.
To adjust the color temperature setting:
1.  Press the OK button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight 
Picture and press OK.
3.  Use the Arrow buttons to highlight 
More and press OK.
4.  Use the Arrow buttons to highlight 
Color Temperature and select 
Normal, Cool, Warm, or Custom. 
 
If you choose Custom, you can 
change the individual Red, Blue, and 
Green gain settings.
5.  When you are finished, press EXIT.  
						

							24
6E322MV
Enabling or Disabling Color Enhancement
Color enhancement reduces oversaturation of some colors and improves flesh 
tones.
To adjust this setting, Picture Mode must be set to Custom.
To enable or disable the color enhancement setting:
1.  Press the OK button on the remote. The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight Picture and press OK.
3.  Use the Arrow buttons to highlight More and press OK.
4.  Use the Arrow buttons to highlight Color Enhancement. 
5.  Use the Left/Right Arrow buttons to change the setting to Off  or On.
6.  Press EXIT.
Enabling or Disabling Adaptive Luma
Adaptive luma adjusts the average brightness of the picture to compensate for 
large areas of brightness.
To adjust this setting, Picture Mode must be set to Custom.
To enable or disable the adaptive luma setting:
1.  Press the OK button on the remote. The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight Picture and press OK.
3.  Use the Arrow buttons to highlight More and press OK.
4.  Use the Arrow buttons to highlight Adaptive Luma. 
5.  Use the Left/Right Arrow buttons to change the setting to Off  or On.
6.  Press EXIT. Enabling or Disabling DCR (Dynamic Contrast Ratio)
Dynamic contrast ratio changes contrast according to displayed content for the 
best picture quality.
To adjust this setting, Picture Mode must be set to Custom.
To enable or disable the DCR setting:
1.  Press the OK button on the remote. The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight Picture and press OK.
3.  Use the Arrow buttons to highlight More and press OK.
4.  Use the Arrow buttons to highlight DCR. 
5.  Use the Left/Right Arrow buttons to change the setting to Off  or On.
6.  Press EXIT.
Resetting the Picture Settings
To restore the TV’s picture settings to the factory defaults:
1.  Press the OK button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight 
Picture and press OK.
3.  Use the Arrow buttons to highlight 
Reset Picture Mode, then press OK.
4.  Use the Arrow buttons to highlight OK 
and press OK.
5.  Press EXIT.  
						

							6
25
E322MV
Adjusting the Audio Settings
Using the Audio Settings menu, you can adjust the following:•	Enable	or	disable		
SRS	TruSurround	HD
™
•	Enable	or	disable	SRS	TruVolume™
•	Adjust	the	equalizer	settings
•	 Adjust	bass	and	treble	levels
•	 Adjust	speaker	balance
•	 Enable	or	disable	the	built-in	
speakers
•	 Select	the	digital	audio	output	
mode
•	 Reset	the	audio	settings	
	
	
	
	
	
	
	
Enabling or Disabling SRS TruSurround HD
TruSurround HD is a robust multichannel virtualization technology developed 
by SRS Labs that provides an enhanced listening experience unlike any other 
technology offered for a two speaker playback environment.
To enable or disable SRS TruSurround HD:
1.  Press the OK button on the remote. The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight Audio and press OK.
3.  Use the Arrow buttons to highlight SRS TruSurround HD.
4.  Press the Right/Left Arrow buttons to select On or Off  and press EXIT. 
 
Enabling or Disabling SRS TruVolume
SRS TruVolume intelligently normalizes volume fluctuations due to television 
commercials or channel changes. 
To enable or disable SRS TruVolume:
1.  Press the OK button on the remote. The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight Audio and press OK.
3.  Use the Arrow buttons to highlight SRS TruVolume.
4.  Press the Right/Left Arrow buttons to select On or Off  and press EXIT.
Adjusting the Equalizer Settings
Your TV features six preset equalizer settings. These settings allow you to 
customize your TV’s sound to match the type of programming you most often 
enjoy.
To adjust the equalizer settings menu, SRS TruSurround HD must 
be set to Off .
To adjust the equalizer settings:
1.  Press the OK button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight 
Audio and press OK.
3.  Use the Arrow buttons to highlight 
Equalizer Settings and press OK.
4.  Use the Arrow buttons to highlight one 
of the following settings and press OK:
•	Classical
•	 Disco
•	 Flat
•	 Jazz
•	 Pop
•	 Rock
5.  Press EXIT.  
						

							26
6E322MV
Adjusting Bass and Treble Levels
The bass and treble levels for your TV’s built-in speakers can be adjusted to your 
liking.
To adjust the bass and treble levels, SRS TruSurround HD must be 
set to Off.
To adjust the bass and treble levels:
1.  Press the OK button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight 
Audio and press OK.
3.  Use the Arrow buttons to highlight 
Equalizer Settings and press OK.
4.  Use the Arrow buttons to highlight 
Bass or Treble and press OK.
5.  Use the Left/Right Arrow buttons to 
increase or decrease the level. 
6.  When you are finished, press EXIT.
Adjusting the Speaker Balance
The built-in speakers can be adjusted to distribute the sound between th\
e left and 
right speakers.
To adjust the speaker balance:
1.  Press the OK button on the remote. The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight Audio and press OK.
3.  Use the Arrow buttons to highlight Balance and press OK.
4.  Use the Arrow buttons to adjust the speaker balance:
•	To	increase	the	loudness	of	the	right	speaker,	increase	the	balance	
setting.
•	 To	increase	the	loudness	of	the	left	speaker,	decrease	the	balance	
setting.
Enabling or Disabling the Built-In Speakers
Using this menu option, you can turn the built-in speakers on or off. This is often 
used when the TV is connected to a home audio system.
To enable or disable the built-in speakers:
1. Press the OK button on the remote. The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight Audio and press OK.
3.  Use the Arrow buttons to highlight TV Speakers and press OK.
4.  Press the Right/Left Arrow buttons to select On or Off  and press EXIT. 
Selecting the Digital Output Mode
Using this menu option, you can force the TV to downsample unsupported audio 
formats to PCM audio. You may want to use this option if you have an older audio 
receiver connected to the TV. 
If you are unfamiliar with audio formats, or your TV is not connected 
to an audio receiver, VIZIO recommends you set this option to Auto.
This option only affects audio output from the optical port.
To select the digital output mode:
1.  Press the OK button on the remote. The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight Audio and press OK.
3.  Use the Arrow buttons to highlight Optical Audio Out and press  
OK.
4.  Use the Arrow buttons to highlight Auto or Force PCM and press  
OK.
5.  Press EXIT.  
						

							6
27
E322MV
Resetting the Audio Settngs
To reset the audio settings to the factory default settings:
1. Press the OK button on the remote. The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight Audio and press OK.
3.  Use the Arrow buttons to highlight Reset Audio Mode and press  
OK.
4.  The TV displays “Are you sure you want to RESET Audio Settings to the 
factory defaults?” 
 
Use the Arrow buttons to highlight OK and press OK.
5.  Press EXIT.Setting the Sleep Timer
When activated, the TV’s sleep timer will turn the TV off after a set period of time.
To use the sleep timer:
1. Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote 
to highlight the Timer icon and press 
OK. The Timer menu is displayed.
3.  Use the Up/Down Arrow buttons on 
the remote to highlight the period of 
time after which you want the TV to 
power off (30, 60, 90, or 120 minutes). 
4.  Press OK, then press EXIT. 
 
   
						

							28
6E322MV
Viewing a USB Photo Slideshow
Your player features a USB port where you can connect and share a USB thumb 
drive containing your photos.
The TV supports the following file types: 
Media	TypeFile	Types
Images 	
.jpeg	 .jpg	
To play USB media, you must first save your images onto a USB thumb dri\
ve. 
Remember:
•	The	USB	thumb	drive	must	be	formatted	as	FAT32
•	 Files	on	the	USB	thumb	drive	must	be	a	supported	file	type
•	 The	USB	thumb	drive	must	have	a	minimum	1GB	memory
•	 The	TV	will	not	play	media	from	external	hard	drives	or	mp3	players
To play your USB media:
5.  Load your photos onto a USB thumb drive using your home computer.
6.  Insert the USB thumb drive into the USB port on the back of the TV.
7.  Press the MENU button on the remote. The on-screen menu is displayed.
8.  Use the Arrow buttons on the remote to highlight the Photo icon and press 
OK. The Photo screen is displayed.
9.  Use the Arrow buttons on the remote to highlight the photo you would like 
to be displayed first, then press the Play button. The slideshow begins.
•	To	pause	the	slideshow,	press	the	Pause	button.
•	 To	go	to	the	previous	photo,	press	the	Stop	button.
•	 To	exit	the	slideshow,	press	the	EXIT	button. Customizing the Photo Display Screen
The Photo menu can be displayed as a list or as a grid of thumbnail imag\
es. The 
images can also be sorted by date or by name.
To customize the photo display screen:
1. 
From the photo screen, use the Arrow 
buttons on the remote to highlight an 
image, then press OK. The menu is 
displayed on the left side of the screen.
2.  Highlight one of the following options 
and press OK:
•	Sort -	Select	to	change	the	display	
order	of	photos.	Choose	Date	or	
Name.
•	 File	-	Select	to	change	the	method	
of	displaying	photos.	Choose	List	
or	Thumbnail.
•	 Thumbnail Size	 -	Select	 to	change	
the	size	of	displayed	thumbnail	
images.	Choose	Small,	Medium,	
or	Large.  
						

							6
29
E322MV
Viewing System Info and Resetting to Factory Defaults
You can use the TV’s Help menu to:•	Display	system	information
•	 Restore	the	TV	to	its	factory	default	settings
•	 Restart	the	Setup	Wizard
Displaying System Information
To display a summary of the TV settings:
1.  Press the MENU button on the remote. The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote to highlight the Help icon and press 
OK. The Help menu is displayed.
3.  Highlight System Info and press OK. The system information is displayed.
4.  When you are finished reviewing the system information, press the EXIT 
button on the remote. 
Restoring the TV to the Factory Default Settingss
All of the on-screen menu settings can be reset to the factory defaults. 
If you restore the TV to the factory default settings, all changes you 
have made to the settings will be lost!
To restore the TV to its factory default settings:
1.  Press the MENU button on the remote. The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote to highlight the Help icon and press 
OK. The Help menu is displayed.
3.  Highlight System Reset and press OK.  
 
The TV displays, “Are you sure you would like to Restore Defaults? This will 
erase any custom settings.” 
4.  Highlight Ye s  and press OK.
5.  Press EXIT. Restarting the Setup Wizard
The TV’s Setup App can be used to easily set up the TV tuner.
To access the Setup App:
1. 
Press the MENU button on the remote. The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote to highlight the Help icon and press 
OK. The Help menu is displayed.
3.  Highlight Start Setup Wizard and press OK.
4.  Use the Number Pad to enter your parental PIN. If you have not yet set 
your PIN, enter 0000.
5.  The TV displays, “Are you sure you want to RESET SETUP WIZARD?” 
 
Highlight OK and press OK.  
						

							A
30Products are often returned due to a technical problem rather than due to a 
defect. If you are experiencing a problem when using your TV, try to fix the issue 
using this troubleshooting guide.
If, after using this troubleshooting guide, you are still experiencing an issue with 
your TV, contact VIZIO’s Support Department. Quality customer support and 
service are integral parts of VIZIO’s commitment to service excellence.
The TV displays “No Signal.”
•	Press the INPUT button on the remote control to select a different 
input source.
•	 If you are using cable TV, satellite, or antenna connected directly to 
the TV, scan for channels. See 
Scanning for Channels on page 12. 
There is no power. •	Ensure the TV is plugged into a working electrical outlet.
•	 Ensure the power cable is securely attached to the TV.
•	 Press the Power/Standby button on the remote or press the Power/
Standby button on the side of the TV to turn the TV on. 
The power is on, but there is no image on the screen. •	Ensure all cables are securely attached to the TV.
•	 Ensure all devices are connected correctly. Devices differ; see your 
device’s user manual for details.
•	 Adjust Brightness, Contrast, or Backlight. See 
Scanning for Channels 
on page 12
.
•	 Press the INPUT button on the remote to select a different input 
source.  There is no sound.
•	Press Volume Up on the remote control.
•	 Press the MUTE button on the remote to ensure mute is off.
•	 Check the audio settings. Ensure the speakers are set to On.
•	 Ensure no headphones are connected to the TV.
•	 Check the audio connections of external devices (Blu-ray player, 
game console, cable/satellite box) that are connected to the TV.
•	 If you are using an antenna, the signal strength of the channel may be 
low. Ensure your antenna is connected securely to the TV and move 
the antenna around the room or close to a window for the best signal.
The colors on the TV don’t look right. •	Adust the Color and Tint settings in the Picture menu. See 
Scanning 
for Channels on page 12
.
•	 Reset the picture settings.
•	 Check all cables to ensure they are securely attached. 
The buttons on the remote aren’t working. •	Ensure you are only pressing one button at a time.
•	 Point the remote directly at the TV when pressing a button.
•	 Replace the remote batteries with new ones. See 
Replacing the 
Batteries
 on page 7.
The image quality is not good. •	For the best image quality, view high-definition programs using digital 
sources. Connect your devices with HDMI cables.
•	 If you are using an antenna, the signal strength of the channel may be 
low. Ensure your antenna is connected securely to the TV and move 
the antenna around the room or close to a window for the best signal. 
Phone:  
   (877) 698-4946
Fax:      (949) 585-9563
Email:      [email protected] Web
:  www.VIZIO.com
Hours of operation:  
  Monday - Friday: 6 am to 9 pm (PST)
  Saturday - Sunday: 8 am to 4pm (PST)
Troubleshooting & Technical Support  
						

							A
31
E321MV
The picture is distorted.•	Nearby electrical devices may be interfering with the TV. Separate the 
TV from electrical appliances, cars, or flourescent lights.
•	 Ensure all cables are securely attached. 
The display image does not cover the entire screen. •	If you are in RGB mode (computer), ensure that H-Size and V-Position 
in the on-screen menu are set correctly.
•	 If you are using TV, AV1, AV2, or Component with 480i input, press 
the WIDE button on the remote to change the screen mode. 
The TV has pixels (dots) that are always dark or always lit. •	Your HDTV is precision-manufactured using an extremely high level 
of technology. However, sometimes pixels may not display correctly. 
These types of occurences are inherent to this type of product and do 
not constitute a defective product.  
I see “noise” or static on the screen. •	When your TV’s digital capabilities exceed a digital broadcast signal, 
the signal is up-converted (improved) to match your TV’s display 
capabilities. This up-converting can sometimes cause irregularities in 
the image.
•	 If you are using an antenna, the signal strength of the channel may be 
low. Ensure your antenna is connected securely to the TV and move 
the antenna around the room or close to a window for the best signal. 
When I change input source, the volume changes. •	The TV remembers the volume level on each input source. If the 
volume level on the new input source is higher or lower than the level 
on the source you switch from, the difference may be noticable.
•	 Use the Volume Up/Down buttons on the remote to adjust the 
volume.  When I change input source, the display image changes size.
•	The TV remembers the viewing mode on each input source. If the 
viewing mode on the new input source differs from the one on the 
input source you switch from, the difference may be noticable.
•	 See 
Setting the Screen Aspect Ratio on page 19.  
						

							B
32
Screen Size:32” Class
Diagonal Viewable: 31.50”
Dimensions w/ Stand:  w/o Stand: 30.39 x 20.79 x 6.34” 
30.39 x 19.21 x 2.13”
Weight w/ Stand:  w/o Stand: 20.2 lbs 
18.2 lbs
TV Type: LED
Refresh Rate: 60 Hz
Maximum Resolution: 1920 x 1080
Pixel Pitch: 0.3635 mm x 0.3635 mm
Dynamic Contrast Ratio: 100,000:1
Viewing Angle: 176 (H) x 176 (V)
Response Time: 6.5 ms
Brightness: 450 nits
HDMI Inputs: 3
Component Video Inputs: 1
Composite Inputs: 1
RF/Coaxial Input: 1
USB Ports: 1
RGB Inputs: 1 (with 3.5mm Audio In)
OSD Language: English, Spanish, French
Audio Outputs: Optical Digital Audio Out, 3.5mm Stereo
Number of Speakers 2
Watts/Channel 10W
Simulated Surround: SRS TruSurround HD, 
Dolby DigitalSound Leveler: SRS TruVolume
Ambient Light Sensor: Ye s
Compliance: Energy Star 
FCC Class B  HDMI 1.3 UL/CUL
Power Consumption: 105W
Voltage Range: 120~240 VAC @ 50/60 Hz
Standby Power: