Vizio E321MV Razor Led Lcd Hdtv User Manual

							5
13
E321MV
Changing the Signal Source
Using this option, you can change the signal source for the coaxial (TV) input.
To change the signal source:
1. Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote 
to highlight the TV icon and press OK. 
The TV Settings menu is displayed.
3.  Use the Arrow buttons to highlight 
Channels and press OK.
4.  Use the Arrow buttons to highlight 
Signal Source and press OK. The 
Signal Source menu is displayed.
5.  Use the Arrow buttons to change the 
setting to Cable or Antenna.
6.  Press EXIT.Scanning for Channels
Before the TV can detect and display channels and their associated informatio\
n, 
you must scan for channels. A channel scan may also be necessary when the 
TV has been moved to an area where different free-to-air broadcast television 
channels are available.
To scan for channels:
1. Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote 
to highlight the TV icon and press OK. 
The TV Settings menu is displayed.
3.  Use the Arrow buttons to highlight 
Channels and press OK.
4.  Use the Arrow buttons to highlight 
Auto Channel Scan and press OK.
5.  Use the Number Pad to enter your 
parental control passcode. 
 
The channel scan begins.
6.  Wait for the channel scan to reach 
100%, then press EXIT. 
 
If you want to cancel the channel 
scan before it is completed, highlight 
Cancel and press OK.  
						

							14
5E321MV
Scanning for New or Additional Channels
When a new channel becomes available in your area, you do not have to rescan 
all channels to add the new channel. Using the add channel feature, you can 
restrict the scan to new channels only. 
This is useful because your master channel list settings are preserved.
To scan for new channels:
1. Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote 
to highlight the TV icon and press OK. 
The TV Settings menu is displayed.
3.  Use the Arrow buttons to highlight 
Channels and press OK.
4.  Use the Arrow buttons to highlight 
Additional Scan.
5.  Use the Arrow buttons to change the 
option to On.
6.  Perform a channel scan. See 
Scanning 
for Channels
 on page 13.
Removing Channels from the Master List
By customizing the master channel list, you can choose which channels ca\
n be 
displayed. Channels not in the list will not be available when watching \
broadcast 
television.
1.  Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote 
to highlight the TV icon and press OK. 
The TV Settings menu is displayed.
3.  Use the Arrow buttons to highlight 
Channels and press OK.
4.  Use the Arrow buttons to highlight 
Skip Channel, then press OK. 
 
The master channel list is displayed.
5.  To add a channel to the list, highlight 
the channel and press OK. When a 
channel is added, a check mark is 
displayed next to the channel. 
 
To remove a channel from the list, 
highlight the channel and press OK. 
When the channel has been removed, 
the checkmark is not displayed. 
 
To add all available channels to the list, 
highlight Mark All and press OK. 
 
To remove all available channels from 
the list, highlight Unmark All and press 
OK. 
 
To include only digital channels in the 
list, highlight Skip Analog Only and 
press OK.
6.  Press EXIT.  
						

							5
15
E321MV
Changing the Audio Language
Some digital free-to-air and cable channels broadcast programs in more than one 
language. The TV’s MTS (Multichannel Television Sound) feature allows you to 
listen to audio in your preferred language.
Not all programs are broadcast in multiple languages. The MTS 
feature only works when the program being viewed is being 
broadcast in the language you select.
To use the Analog MTS feature:
1.  From the TV Settings menu, highlight 
Channels and press OK. 
2.  Highlight Analog MTS and press OK.
3.  Select Mono, Stereo, or SAP 
(secondary audio programming). Press 
OK.
4.  Press the EXIT button on the remote.
To use the Digital MTS feature:
1.  From the TV Settings menu, highlight 
Channels and press OK.
2.  Highlight Digital MTS and press OK.
3.  Select your preferred language: 
English, French, or Spanish. Press 
OK.
4.  Press the EXIT button on the remote. 
Customizing Channel Names
Your TV features the ability to customize channel names, making them easy to 
identify. (Custom names have a 10-character limit.)
For example, 
KBOT-DT could be renamed as Favorite.
To customize a channel name:
1.  Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote 
to highlight the TV icon and press OK. 
The TV Settings menu is displayed.
3.  Use the Arrow buttons to highlight 
Channels and press OK.
4.  Use the Arrow buttons to highlight 
Channel Name Edit and press OK.
5.  Use the Arrow buttons to highlight 
Custom Label and press OK. 
 
The on-screen keyboard is displayed.
6.  Use the Arrow and OK buttons to spell 
the custom channel name. 
 
When you are finished, highlight OK 
and press OK.
7.  Press EXIT.  
						

							16
5E321MV
Changing the On-Screen Menu Language
Your TV can display the on-screen menu in different languages.
To change the on-screen menu language:
1. Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote 
to highlight the TV icon and press OK. 
The TV Settings menu is displayed.
3.  Use the Arrow buttons to highlight 
Menu Language and press OK.
4.  Use the Arrow buttons to highlight 
your preferred language and press OK.
5.  Press EXIT.
Setting the TV’s Date and Time
From the Date & Time menu, you can:
•	Set	the	time	zone
•	 Adjust	the	time	for	daylight	savings	
•	 Enable	or	disable	automatic	date	and	time	updates
•	 Set	the	current	date	and	time
Setting the Time Zone
To set the time zone:
1.  Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote 
to highlight the TV icon and press OK. 
The TV Settings menu is displayed.
3.  Use the Arrow buttons to highlight 
Date & Time and press OK.
4.  Use the Arrow buttons to highlight 
Time Zone and press OK.
5.  Use the Arrow buttons to highlight 
your time zone and press OK.
6.  Press EXIT.   
						

							5
17
E321MV
Adjusting the Time for Daylight Savings
When enabled, this setting will automatically adjust the time for zones \
which 
recognize daylight savings time.
To enable or disable the daylight savings adjustment:
1. Press the MENU button on the remote. The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote to highlight the TV icon and press 
OK. The TV Settings menu is displayed.
3.  Use the Arrow buttons to highlight Date & Time and press OK.
4.  Use the Arrow buttons to highlight Daylight Saving.
5.  Use the Arrow buttons to change the setting to On or Off .
6.  Press EXIT. 
Enabling or Disabling Automatic Date and Time Updates
The current date and time is broadcast digitally in many areas. Your TV can 
automatically set the time and date using this information.
When this setting is On, you cannot manually set the date and time.
To enable or disable automatic updates:
1.  Press the MENU button on the remote. The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote to highlight the TV icon and press 
OK. The TV Settings menu is displayed.
3.  Use the Arrow buttons to highlight Date & Time and press OK.
4.  Use the Arrow buttons to highlight Auto Update.
5.  Use the Arrow buttons to change the setting to On or Off .
6.  Press EXIT. Setting the Date and Time
Using this menu option, you can manually set the TV’s date and time.
To manually set the time:
1. 
Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote 
to highlight the TV icon and press OK. 
The TV Settings menu is displayed.
3.  Use the Arrow buttons to highlight 
Date & Time and press OK.
4.  Use the Arrow buttons to highlight 
Current Time.
5.  Use the Arrow buttons to highlight 
individual numbers in the date and 
time. Use the Number Pad to enter the 
current date and time.
6.  Press EXIT.
To manually set the date:
1.  Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote 
to highlight the TV icon and press OK. 
The TV Settings menu is displayed.
3.  Use the Arrow buttons to highlight 
Date & Time and press OK.
4.  Use the Arrow buttons to highlight 
Today’s Date.
5.  Use the Arrow buttons to highlight 
individual numbers in the date and 
time. Use the Number Pad to enter the 
current date and time.
6.  Press EXIT.  
						

							18
5E321MV
Adjusting the TV Settings for Use with A PC
Your TV can be used to display output from a home computer using the RGB port. 
These settings are only available when viewing content from the 
RGB port.
To adjust the PC settings:
1.  Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote 
to highlight the TV icon and press OK. 
The TV Settings menu is displayed.
3.  Use the Arrow buttons to highlight PC 
Settings and press OK.
4.  Use the Arrow and OK buttons to 
adjust each of the following options: 
 
Horiz. Position - Adjust the horizontal 
(left/right) position of the picture. 
 
Vertical Position - Adjust the vertical 
(up/down) position of the picture. 
 
Fine Tune - Adjust the synchronization 
between the PC and the TV. Increase 
or decrease this setting if you see 
“waviness” or a blurry picture. 
If you would like the TV to automatically adjust the picture for best 
quality, select Auto Sync and press OK.
Turning the VIZIO Light On or Off
This setting allows you to turn off the back-lit VIZIO logo on the front bezel of your 
T V.
To turn the VIZIO Light on or off:
5. Press the MENU button on the remote. 
The on-screen menu is displayed.
6.  Use the Arrow buttons on the remote 
to highlight the TV icon and press OK. 
The TV Settings menu is displayed.
7.  Use the Arrow buttons to highlight 
VIZIO Logo and press OK.
8.  Use the Left/Right Arrow buttons to 
select On or Off :
•	 When	set	to	Off ,	the	VIZIO	logo	
will	briefly	light	up	when	the	TV	is	
turned	on.	It	will	remain	off	while	
the	TV	is	on.
•	 When	set	to	On,	the	VIZIO	logo	will	
stay	lit	while	the	TV	is	on.  
						

							6
19
Your TV features an easy-to-use on-screen menu. Using this menu, you can:•	Set	the	sleep	timer
•	 View	a	USB	photo	slideshow
•	 Set	the	screen	aspect	ratio
•	 Adjust	the	audio	settings
•	 Adjust	the	picture	settings
•	 Adjust	the	parental	controls
•	 Get	system	info	or	reset	to		
factory	defaults
•	 Set	up	closed	captions
 
 
 
 
 
 
 
 
Navigating the On-Screen Menu
To open the on-screen menu, press the OK 
button on the remote. 
Use the Arrow buttons to highlight a menu 
option, and press the OK button to select 
that option. 
Setting the Sleep Timer
When activated, the TV’s sleep timer will turn the TV off after a set period of time.
To use the sleep timer:
1. Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote 
to highlight the Timer icon and press 
OK. The Timer menu is displayed.
3.  Use the Up/Down Arrow buttons on 
the remote to highlight the period of 
time after which you want the TV to 
power off (30, 60, 90, or 120 minutes). 
4.  Press OK, then press EXIT.
Using the Other Menu Settings  
						

							20
6E321MV
Viewing a USB Photo Slideshow
Your player features a USB port where you can connect and share a USB thumb 
drive containing your photos.
The TV supports the following file types: 
Media	TypeFile	Types
Images 	
.jpeg	 .jpg	
To play USB media, you must first save your images onto a USB thumb dri\
ve. 
Remember:
•	The	USB	thumb	drive	must	be	formatted	as	FAT32
•	 Files	on	the	USB	thumb	drive	must	be	a	supported	file	type
•	 The	USB	thumb	drive	must	have	a	minimum	1GB	memory
•	 The	TV	will	not	play	media	from	external	hard	drives	or	mp3	players
To play your USB media:
1.  Load your photos onto a USB thumb drive using your home computer.
2.  Insert the USB thumb drive into the USB port on the back of the TV.
3.  Press the MENU button on the remote. The on-screen menu is displayed.
4.  Use the Arrow buttons on the remote to highlight the Photo icon and press 
OK. The Photo screen is displayed.
5.  Use the Arrow buttons on the remote to highlight the photo you would like 
to be displayed first, then press the Play button. The slideshow begins.
•	To	pause	the	slideshow,	press	the	Pause	button.
•	 To	go	to	the	previous	photo,	press	the	Stop	button.
•	 To	exit	the	slideshow,	press	the	EXIT	button. Using the Photo Menu
The Photo menu has several options:
•	Browse Photos	-	Allows you to 
highlight and select a photo from 
the thumbnail gallery.
•	 View Slideshow - Start a 
full-screen photo slideshow.
•	 Sort by -	Change	the	display	order	
of	photos.	Choose	Original, Title 
A-Z, Title Z-A, Oldest First, or 
Newest First.
•	 View	-	Choose	Folders	(individual	
folders	and	their	contents),	
Favorites,	or	All.
•	 Slide Settings	-	Change	the	
slideshow	settings.	Available	
options	are	Repeat,	Shuffle,	Full	
Screen (this	may	distort	some	
photos	to	fill	the	screen),	and	
Speed (Slow	or	Fast).
•	 Picture Settings	-	Change	the	
display	settings.	See	
Adjusting	the	
Picture	Settings
	on	page	25.
•	 Thumbnail Size	-	Move	the	on-screen	slider	to	change	the	size	of	
displayed	thumbnail	images.	Choose	Large	or	Small.  
						

							6
21
E321MV
Using the Modify Photo Menu
This menu allows you to zoom in and out, mark your favorite photos, rotate 
photos, and see your image metadata.
To open the Modify Photo menu:
1. When you are viewing a photo in 
fullscreen, press the OK button on the 
remote. The Modify Photo menu is 
displayed.
2.  Use the Arrow and OK buttons on 
the remote to select one of the menu 
options:
•	Zoom In -	Select	this	option	up	to	
4	times	to	zoom	in.
•	 Zoom Out -	Select	this	option	to	
zoom	back	out.
•	 Pan	-	Select	this	option	when	
zoomed	in	to	move	the	image.
•	 Favorite	-	Select	this	option	to	
mark	the	image	as	a	Favorite.	You	
can	then	use	the	View	Favorites	
option	to	display	only	marked	
photos.
•	 Rotate Photo	-	Select	this	option	to	rotate	the	photo	90°	counter-
clockwise.	This	option	cannot	be	selected	while	zoomed	in.
•	 Info	-	Select	this	option	to	open	an	info	window.	The	window	displays	
image	metadata	including	date,	resolution,	and	file	size.	The	metadata	
may	vary	according	to	your	camera	settings.
3.  When you have finished, use the Arrow buttons to highlight Done and 
press OK.Setting the Screen Aspect Ratio
The TV can display images in five different modes: Normal, Wide, Zoom, Panoramic, 
and Stretch. Each mode changes the picture according to the content’s original 
format.
Use the table on the next page to determine the best aspect ratio for yo\
ur content 
type. Areas in red will not be visible on your TV screen.
To adjust the screen aspect ratio:
1. Press the OK button on the remote. The on-screen menu is displayed.
2.  Use the Arrow buttons on the remote to highlight the Wide icon and press 
OK. The Wide menu is displayed.
3.  Use the Left/Right Arrow buttons on the remote to highlight the screen 
mode you want to display, then press OK:
•	Normal preserves	the	content’s	original	aspect	ratio.	Since	the	4:3	
aspect	ratio	is	not	large	enough	to	fill	the	TV’s	screen,	black	bars	are	
added	to	the	left	and	right	of	the	display	image.
•	 Wide stretches	a	4:3	aspect	ratio	picture	to	the	edges	of	the	screen.	
Since	the	picture	is	being	stretched,	the	display	image	may	appear	
distorted.	If	the	program	is	already	formatted	for	widescreen	viewing	
(1.85:1	or	2.35:1),	then	black	bars	will	appear	on	the	top	and	bottom	of	
the	display	image.
•	 Zoom expands	images	with	black	bars	to	fit	the	screen.
•	 Panoramic expands	the	display	image	to	fill	the	screen.	Images	may	
appear	wider	than	intended.	If	you	are	watching	widescreen	(1.85:1	
or	2.35:1)	content,	black	bars	will	still	appear	on	the	top	and	bottom	
of	the	display	image.	This option is only available when the TV is 
displaying a 480i/480p source.
•	 Stretch	expands	the	display	image	to	fill	the	screen.	Images	may	
appear	wider	than	intended.	If	you	are	watching	widescreen	(1.85:1	
or	2.35:1)	content,	black	bars	will	still	appear	on	the	top	and	bottom	
of	the	display	image.	This option is only available when the TV is 
displaying a 720p/1080i/1080p source. 
You can also quickly access the Wide menu by pressing the WIDE 
button on the remote.  
						

							22
6E321MV
Original	
Content	 Format
	
480p/480i	(4:3)
	
720p	(16:9)
	
1080p/1080i	(16:9)
	
RGB	(4:3)
	
RGB	(16:9)
Normal
Wide
Zoom
Panoramic
Stretch
Screen Aspect Ratio Table