Vizio E320, 370, 420VT Razor Led Lcd Hdtv User Manual

2
3
Component 1/ 
Composite: Connect component or composite video/audio de-
vice. When using composite, use only yellow, white, 
and red ports.
RGB PC/ 
Component 2: Connect RGB cable from computer, or use RGB-to-
component adapter to connect component video 
device.
DTV/TV: Connect RF/Coaxial connector from cable, antenna, 
or satellite box. Use the included RF Adpater when 
connecting your RF/coaxial cable.
RGB PC/ 
Component 2   Audio In: Connect 3.5mm connector for audio when using the 
RGB PC port...

4
2E320VT / E370VT / E420VT
Front Panel
Front Panel
Remote Control Sensor
Remote Control Sensor: When using the remote, point it directly at this 
sensor.
Right Side Panel
Right Side Panel
Power
Menu
Channel Up
Volume Up
Channel Down
Volume Down
Input
Power: Turn the TV on or off.
Menu: Display on-screen menu.
Channel Up/Down: Change the channel.
Volume Up/Down: Increase or decrease the loudness of the TVs audio.
Input: Change the input device. With each press of the  
button, the TV will display a...

2
5
E320VT / E370VT / E420VT
Remote Control
Power/Standby:Turn the TV on or off.
Input: Change the input device. With each press of the 
button, the TV will display a different input.
A/V Controls: Control USB photo slideshow.
Info: Display the Info Window.
CC: Open the Closed Captioning menu.
Menu: Display the on-screen menu.
Exit: Close the on-screen menu.
Arrow: Navigate the on-screen menu and episode guide.
OK: Select highlighted menu option.
Back: Go to the previous on-screen menu options.
Volume...

6
2E320VT / E370VT / E420VT
Replacing the Batteries
1. Remove the battery cover.
2.  Insert two AAA batteries into the 
remote control. Make sure that the (+) 
and (-) symbols on the batteries match 
the (+) and (-) symbols inside the 
battery compartment.
3.  Replace the battery cover. 
 
• Use only good quality batteries.
• Inserting the batteries incorrectly may result in cracking or leakage   
   that may cause a fire or result in injury.
• Dispose of old or dead batteries in accordance with local...

3
7
Connecting Your Devices
Your HDTV can be easily connected to an external device:•	DVD	or	Blu-Ray	player
•	 Video	game	console
•	 Cable	box
•	 External	antenna
•	 Or	other	device
Before You Begin
To connect a device to the HDTV:
1. Verify that the device has one of the following types of video ports 
available: 
Required	Device	Ports
HDMI RGB
RF/Antenna
Component
Composite	AV
2.  Ensure the TV has a matching port available.
3.  Ensure you have a cable that matches the available port. For example, if...

8
3E320VT	/	E370VT	/	E420VT
Select One:
OR
OROR
OR
BETTER GOODBEST
HDMI
RF /
C OAXIAL
RGB
C OMPONENT
C OMPOSITE
AV DIGIT
AL
DIGIT AL /
ANAL OG
ANAL OG
ANAL OG
ANAL OG
Device	Connection	Chart
Select	one	of	the	connection	types.	
	
Use	the	cable(s)	shown	to	connect	 	
the	TV	to	your	device.  

4
9
The first time you turn on the TV, the Setup App will guide you through each of 
the steps necessary to get your TV ready for use.
Before you begin the first-time setup:•	Your	TV	should	be	installed	and	the	power	cord	should	be	connected	
to	an	electrical	outlet.
•	 Have	your	remote	ready.	Ensure	the	batteries	are	inserted.
•	 Your	devices	should	be	connected.
To complete the first-time setup:
1.  Turn the TV on by pressing the 
Power/Standby button on the 
remote. 
 
The Setup App is displayed....

5
10From the TV Settings Menu, you can:
•	Setup	channels
•	 Change	the	input	source
•	 Change	the	on-screen	menu	
language
•	 Change	the	TV’s	date	and	time
•	 Adjust	the	TV	settings	for	use	as	a	
PC	monitor
•	 Enable	or	disable	the	CEC	settings
Setting Up Channels
From the channel menu you can:
•	Change	the	signal	source
•	 Customize	the	master	channel	list
•	 Scan	for	new/additional	channels
•	 Start	a	new	channel	scan
•	 Customize	channel	names
Changing the Signal Source
Using this option, you can...

5
11
E320VT	/	E370VT	/	E420VT
Changing the Input Source
External devices such as DVD players, Blu-Ray Players, and video game console\
s 
can be connected to your TV. To use one of these devices with your TV, you must 
first change the input source in the on-screen menu.
To change the input device:
1. Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight TV 
and press OK.
3.  Use the Arrow buttons to highlight 
Input and press OK. 
4.  Use the Arrow...

12
5E320VT	/	E370VT	/	E420VT
Removing Unused Inputs from the Input List
If you are not using an input and would like to remove it from the input list, you can 
do this from the Input menu.
To remove unused inputs:
1. Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight TV 
and press OK.
3.  Use the Arrow buttons to highlight 
Input and press OK.
4.  Use the Arrow buttons to highlight 
Input Naming and press OK.
5.  Use the Arrow buttons on the...