Vivitek Projector Qumi User Manual

							25 Chapter 4 O n - Screen Display (OSD) Settings  
OSD Menu Controls 
Qumi has  an On-Screen Display (OSD) settings, accessed by the  OSD Menu button on the 
remote        , that  allows you to make adjustments and change setting, such as display and 
audio  settings.  The 

OSD menu has  10 sub-menus:  

•  Language – Allows for the selection of the language for the OSD Menu. Press OSD 
Menu key for entry. Select and move to the desired language using the Arrow Keys 
and then press the Menu or Exit key to confirm and exit. 
Display Settings – Allows  adjustment  of 
projector’s image display settings  to 
viewers  preference . The display settings consist of Bright, Presentation,  Movie and 
User 

modes.  Select  and move to the desired display mode using the Arrow  Keys 
and then press the Menu or Exit  key to confirm and exit.
Sound Setti ngs – Select or adj ust the projectors audio settings. The audio settings 
consi st of Standar d, 
Music, Movie, Sports, and Use r modes. Sel ect and move to the 
desir ed sound m ode using the Arr ow Keys and then pres s the M enu or Exit  key to
 
confir m and exit. •
Color Temperature - Adjust color temperature of  screen  and RGB parameters  to 
users  preferwence . 
Select and move to the desired color temperature mode using the 
Arrow Keys  and then press the Menu or Exit  key to confirm  and exit.  •
Aspect Ratio Modes  –
 Select the aspect ratio  to adjust how the image appears on the
screen.  Select  and  move  to  the  target  mode  by  using  Up/Down  Key  and  tpress  the
Menu or Exit key to confirm and exit.
 Projection Mode 
–
 Allows for the selection of the projection mode (Depends on
mounting method). Press the Entry button to choose from the available modes.
• Keystone  Correction  -  Corrects  misaligned  or  distorted  images  so  that  projection  is
displayed  correctly  on  the  screen.  Select  and  move  to  the  keystone  correction  mode
using the Arrow Keys and then press the Menu or Exit key to confirm and exit.
 Software update (USB)  - 
U pdate s system  software.  Place the software in the root
directory of USB drive, and then press OK  Key to enter the update confirmation
interface and select Yes to update the software. 
Reset All - Restore factory settings and default parameters of the system, including
image, sound, projection, keystone, etc.
 Status - Displays relevant system information (such as software version) Note:  
If the OSD menu is non - active for 10 seconds, it will disappears.   
						

							26 
OSD Menu Overview 
Use the following table to quickly find a setting or determine the range for a setting  Main Menu   Submenu/setting  
OSD  Languages   Česky,  English,  Français,  Dansk,  Espaol,  Hrvatski,  Deutsch,  Eλληolk, 
Italiano,  Magyar,  Polski,   Româneste,  Nederlands,  Português,  slovenščina, 
Norsk, русский, Srpski, Suomi,   简体中文 , Svenska,   繁體中文 ,  日本語  
Display  M ode  
Presentations   Bright : C ontrast 50,  B rightness 5 5 ,  C olor 50,  S harpness 50,  Tint   50  
Presentation : C ontrast 49,  C rightness 49,  C olor 50,  S harpness 50,  Tint   50  
Movie: C ontrast 49,  B rightness 49,  C olor 40,  S harpness 50,  Tint   50  
User :  Contrast  50 , Brightness  50 , Color 40,  Sharpness 50  
Sound   M ode   Standard :  Treble 50, Bass 50  
Musi c:  Treble 75, Bass 75  
Movie :  Treble 75, Bass 90  
Sport :  Treble 35, Bass 35  
User :  Treble  50 , Bass  50  
Color  T emperature   C ool:  Red 50, Green 50, Blue 50  
Medium:  Red 50, Green 50, Blue 50  
Warm :  Red 60, Green 38, Blue 25  
Use r:  Red 0, Green  0 , Blue  0  
Aspect Ratio   4:3, 16:9,  Z oom X 1,  ZoomX2  
Projection  M ethod   3, 2, 1  
Keystone 
C orrection   Auto : Calibration  
Manual  -   - 35  -   +35  
Softwar e U pdate  (USB)   *Follow onscreen steps for software update
Reset All   Are you sure?  Yes   or  No  
St atus   LED Hours: xx  
Software  Version :   No. XX.X - XXX.XX.XX   
						

							27 
OSD Language Settings 
Qumi’s  OSD  language  menu  can be  easily  changed . Perform  the  following  steps  to  change  the 
OSD language: 
1. Press  the  OSD  Screen  Menu  button on  the  remote  control  to  enter  the  Settings 
menu.
2. Move the cursor to highlight the menu language, and press .  3.
Press ,  ,    and    buttons to choose the preferred language. 
4. Press button to exit language settings.  
						

							28 
D
isplay  Mode  
Settings  
Perform the following steps to change the display mode: 
1.  Press  the  OSD  Screen  Menu  button    on  the  remote  control  to  enter  the  Settings 
menu. 
2. Move the cursor to highlight the Display Mode, and press to enter this mode.  3. Press and  buttons to select the desired display mode (Presentation,Bright, Movie 
User).
4. Press button to exit display mode settings. 
Note:  
User display modes may be adjusted to the preference of the user and their applications.  
						

							29 
Sound
 M ode  Settings  
Perform the following steps to change the sound mode: 
1.  Press  the  OSD  Screen  Menu  button    on  the  remote  control  to  enter  the  Settings 
menu. 
2. Move the cursor to highlight the Sound Mode, and press to enter this mode.  3. Press   
andbuttons  to  select  the  desired  sound  mode  (Standard,  Music,  Film, 
Sport and User).
4. Press button to exit sound mode settings.  Note:  
Treble and Bass can be adjusted as required by the applications.   
						

							30 
C
olor  Temperature  Settings  
Perform the following steps to change the color temperature settings: 
1.  Press  the  OSD  Screen  Menu  button    on  the  remote  control  to  enter  the  Settings 
menu. 
2. Move the cursor to highlight the color temperature, and press to enter this mode.  3.
Press   and buttons to select the desired Color Temperature mode. 
4. Press button to exit the Color Temperature mode settings.  Note:  
Red, green and blue colors can be adjusted as required by the applications.   
						

							31 
Aspect Ratio Settings
 
Perform the following steps to change the projector’s aspect ratio:  
1.  Press  the  OSD  Screen  Menu  button    on  the  remote  control  to  enter  the  Settings 
menu. 
2. Move the cursor to highlight the Aspect Ratio settings and press to enter this mode.  3. Press  
and buttons to select the desired Aspect Ratio mode. 
4. Press button to exit the Aspect Ratio mode settings.  
						

							32 
P
rojection M ethod Settings  
Perform the following steps to change the projector’s projection method: 
1.  Press  the  OSD  Screen  Menu  button  on  the  remote  control  to  enter  the  Settings 
menu. 
2. Move  the  cursor  to  highlight  the  Projection  Method  settings  and  press to  enter  this 
mode. 3. Repeatedly press button to select the desired projection method (3, 2, 1). 
4. Press button to exit the Projection Method settings.  
						

							33 
Keystone
 C orrection  Settings  
Perform the following  steps to change the projector’s keystone correction:  
1.  Press  the  OSD  Screen  Menu  button    on  the  remote  control  to  enter  the  Settings 
menu. 
2. Move  the  cursor  to  highlight  the  Keystone  Correction  settings,  and  press to  enter 
this mode. 3. Press , ,    and    buttons to select the desired Keystone Correction mode.
 
4. Press button to exit the Keystone Correction settings.  Note:  
The  keystone  correction   may  be  adjusted  as  required  by  the  application.   (Values  are 
between -35 and 
+35)  
						

							34 
Software 
Update  Settings  (USB) 
For  further  assistance, please contact  your reseller or Vivitek (www.vivitekcorp.com) .