Vivitek Projector Qumi User Manual

25 Chapter 4 O n - Screen Display (OSD) Settings  
OSD Menu Controls 
Qumi has  an On-Screen Display (OSD) settings, accessed by the  OSD Menu button on the 
remote        , that  allows you to make adjustments and change setting, such as display and 
audio  settings.  The 

OSD menu has  10 sub-menus:  

•  Language – Allows for the selection of the language for the OSD Menu. Press OSD 
Menu key for entry. Select and move to the desired language using the Arrow Keys 
and then press the Menu or Exit...

26 
OSD Menu Overview 
Use the following table to quickly find a setting or determine the range for a setting  Main Menu   Submenu/setting  
OSD  Languages   Česky,  English,  Français,  Dansk,  Espaol,  Hrvatski,  Deutsch,  Eλληolk, 
Italiano,  Magyar,  Polski,   Româneste,  Nederlands,  Português,  slovenščina, 
Norsk, русский, Srpski, Suomi,   简体中文 , Svenska,   繁體中文 ,  日本語  
Display  M ode  
Presentations   Bright : C ontrast 50,  B rightness 5 5 ,  C olor 50,  S harpness 50,  Tint   50  
Presentation...

27 
OSD Language Settings 
Qumi’s  OSD  language  menu  can be  easily  changed . Perform  the  following  steps  to  change  the 
OSD language: 
1. Press  the  OSD  Screen  Menu  button on  the  remote  control  to  enter  the  Settings 
menu.
2. Move the cursor to highlight the menu language, and press .  3.
Press ,  ,    and    buttons to choose the preferred language. 
4. Press button to exit language settings.  

28 
D
isplay  Mode  
Settings  
Perform the following steps to change the display mode: 
1.  Press  the  OSD  Screen  Menu  button    on  the  remote  control  to  enter  the  Settings 
menu. 
2. Move the cursor to highlight the Display Mode, and press to enter this mode.  3. Press and  buttons to select the desired display mode (Presentation,Bright, Movie 
User).
4. Press button to exit display mode settings. 
Note:  
User display modes may be adjusted to the preference of the user and their...

29 
Sound
 M ode  Settings  
Perform the following steps to change the sound mode: 
1.  Press  the  OSD  Screen  Menu  button    on  the  remote  control  to  enter  the  Settings 
menu. 
2. Move the cursor to highlight the Sound Mode, and press to enter this mode.  3. Press   
andbuttons  to  select  the  desired  sound  mode  (Standard,  Music,  Film, 
Sport and User).
4. Press button to exit sound mode settings.  Note:  
Treble and Bass can be adjusted as required by the applications.   

30 
C
olor  Temperature  Settings  
Perform the following steps to change the color temperature settings: 
1.  Press  the  OSD  Screen  Menu  button    on  the  remote  control  to  enter  the  Settings 
menu. 
2. Move the cursor to highlight the color temperature, and press to enter this mode.  3.
Press   and buttons to select the desired Color Temperature mode. 
4. Press button to exit the Color Temperature mode settings.  Note:  
Red, green and blue colors can be adjusted as required by the...

31 
Aspect Ratio Settings
 
Perform the following steps to change the projector’s aspect ratio:  
1.  Press  the  OSD  Screen  Menu  button    on  the  remote  control  to  enter  the  Settings 
menu. 
2. Move the cursor to highlight the Aspect Ratio settings and press to enter this mode.  3. Press  
and buttons to select the desired Aspect Ratio mode. 
4. Press button to exit the Aspect Ratio mode settings.  

32 
P
rojection M ethod Settings  
Perform the following steps to change the projector’s projection method: 
1.  Press  the  OSD  Screen  Menu  button  on  the  remote  control  to  enter  the  Settings 
menu. 
2. Move  the  cursor  to  highlight  the  Projection  Method  settings  and  press to  enter  this 
mode. 3. Repeatedly press button to select the desired projection method (3, 2, 1). 
4. Press button to exit the Projection Method settings.  

33 
Keystone
 C orrection  Settings  
Perform the following  steps to change the projector’s keystone correction:  
1.  Press  the  OSD  Screen  Menu  button    on  the  remote  control  to  enter  the  Settings 
menu. 
2. Move  the  cursor  to  highlight  the  Keystone  Correction  settings,  and  press to  enter 
this mode. 3. Press , ,    and    buttons to select the desired Keystone Correction mode.
 
4. Press button to exit the Keystone Correction settings.  Note:  
The  keystone  correction   may...

34 
Software 
Update  Settings  (USB) 
For  further  assistance, please contact  your reseller or Vivitek (www.vivitekcorp.com) .