Home > Vivitek > Projector > Vivitek Projector H5095 Series User Manual

Vivitek Projector H5095 Series User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Vivitek Projector H5095 Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 263 Vivitek manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							— 72 — 
    REGULATORY COMPLIANCE 
    FCC Warning 
    This equipment has been tested and found to comply with the limits for a Class B digital device 
    pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
    against harmful interference when the equipment is operated in a commercial environment. 
    This equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
    used in accordance with the instruction manual, may cause harmful interference to radio 
    communications. Operation of this equipment in a residential area is likely to cause harmful 
    interference in which case the user will be required to correct the interference at his/her own expense. 
    Changes or modifications not expressly approved by the parties responsible for compliance could 
    void the user’s authority to operate the equipment. 
    Canada 
    This class B digital apparatus complies with Canadian ICES-003. 
    Safety Certifications 
    FCC-B, cUL, UL, CE, C-tick, CCC, KC, CB, EAC  
    						
    							– 73 – 
    APPENDIX I 
    RS-232C Protocol 
    RS232 Setting 
    Baud rate: 9600 
    Parity check: None 
    Data bit: 8 
    Stop bit: 1 
    Flow Control None 
    Control Command Structure 
      Header code Command code Data code End code 
    HEX   Command Data 0Dh 
    ASCII ‘V’ Command Data CR 
    Operation Command 
    Note: 
    CR mean Carriage Return 
    XX=00-98, projectors ID, XX=99 is for all projectors 
    Return Result P=Pass / F=Fail 
    n: 0:Disable/1: Enable/Value(0~9999) 
     
    Command Group 00 
    ASCII HEX Function Description Return Result 
    VXXS0001 56h Xh Xh 53h 30h 30h 30h 31h 0Dh Power On   P/F 
    VXXS0002 56h Xh Xh 53h 30h 30h 30h 32h 0Dh Power Off   P/F 
    VXXS0003 56h Xh Xh 53h 30h 30h 30h 33h 0Dh Resync   P/F 
    VXXG0004 56h Xh Xh 47h 30h 30h 30h 34h 0Dh Get Lamp Hours   Pn/F 
    VXXS0006 56h Xh Xh 53h 30h 30h 30h 36h 0Dh System Reset   P/F 
    VXXG0007 56h Xh Xh 47h 30h 30h 30h 37h 0Dh Get System Status 
    0:Reset 
    1:Standby 
    2:Operation 
    3:Cooling 
    Pn/F 
    VXXG0008 56h Xh Xh 47h 30h 30h 30h 38h 0Dh Get F/W Version   Pn/F 
    VXXG0009 56h Xh Xh 47h 30h 30h 30h 39h 0Dh  Get Alter EMail   Pn/F 
    VXXS0009n 56h Xh Xh 53h 30h 30h 30h 39h nh 0Dh  Set Alter Email n=xxxxxx@xxx
    x.xxx.xx P/F 
      
    						
    							— 74 — 
    Command Group 01 
    ASCII HEX Function Description Return Value 
    VXXG0101 56h Xh Xh 47h 30h 31h 30h 31h 0Dh Get Brightness n=0~100 Pn/F 
    VXXS0101n 56h Xh Xh 53h 30h 31h 30h 31h nh 0Dh Set Brightness n=0~100 P/F 
    VXXG0102 56h Xh Xh 47h 30h 31h 30h 32h 0Dh Get Contrast n=0~100 Pn/F 
    VXXS0102n 56h Xh Xh 53h 30h 31h 30h 32h nh 0Dh Set Contrast n=0~100 P/F 
    VXXG0103 56h Xh Xh 47h 30h 31h 30h 33h 0Dh Get Color n=0~100 Pn/F 
    VXXS0103n 56h Xh Xh 53h 30h 31h 30h 33h nh 0Dh Set Color n=0~100 P/F 
    VXXG0104 56h Xh Xh 47h 30h 31h 30h 34h 0Dh Get Tint n=0~100 Pn/F 
    VXXS0104n 56h Xh Xh 53h 30h 31h 30h 34h nh 0Dh Set Tint n=0~100 P/F 
    VXXG0105 56h Xh Xh 47h 30h 31h 30h 35h 0Dh Get Sharpness 0~31 Pn/F 
    VXXS0105n 56h Xh Xh 53h 30h 31h 30h 35h nh 0Dh Set Sharpness 0~31 P/F 
    VXXG0106 56h Xh Xh 47h 30h 31h 30h 36h 0Dh Get Color 
    Temperature 
    0:Warm 
    1:Normal 
    2:Cold 
    Pn/F 
    VXXS0106n 56h Xh Xh 53h 30h 31h 30h 36h nh 0Dh Set Color 
    Temperature 
    0:Warm 
    1:Normal 
    2:Cold 
    P/F 
    VXXG0107 56h Xh Xh 47h 30h 31h 30h 37h 0Dh Get Gamma 
    0:1.8 
    1:2.0 
    2:2.2 
    3:2.4 
    4:B&W 
    5:Linear 
    Pn/F 
    VXXS0107n 56h Xh Xh 53h 30h 31h 30h 37h nh 0Dh Set Gamma 
    0:1.8 
    1:2.0 
    2:2.2 
    3:2.4 
    4:B&W 
    5:Linear 
    P/F 
     
    Command Group 02 
    ASCII HEX Function Description Return Value 
    VXXS0201 56h Xh Xh 53h 30h 32h 30h 31h 0Dh Select RGB   P/F 
    VXXS0202 56h Xh Xh 53h 30h 32h 30h 32h 0Dh Select RGB2   P/F 
    VXXS0203 56h Xh Xh 53h 30h 32h 30h 33h 0Dh Select DVI   P/F 
    VXXS0204 56h Xh Xh 53h 30h 32h 30h 34h 0Dh Select Video   P/F 
    VXXS0205 56h Xh Xh 53h 30h 32h 30h 35h 0Dh Select S-Video   P/F 
    VXXS0206 56h Xh Xh 53h 30h 32h 30h 36h 0Dh Select HDMI   P/F 
    VXXS0208 56h Xh Xh 53h 30h 32h 30h 38h 0Dh Select 
    Component  P/F 
    VXXS0210 56h Xh Xh 53h 30h 32h 31h 30h 0Dh Select 
    Display Port   P/F  
    						
    							– 75 – 
    Command Group 02 
    ASCII HEX Function Description Return Value 
    VXXG0220 56h Xh Xh 47h 30h 32h 32h 30h 0Dh Get Current 
    Source 
    Return 
    1:RGB 
    2:RGB2 
    3:DVI 
    4:Video 
    5:S-Video 
    6:HDMI 
    7: Component 
    8: Display Port 
    Pn/F 
     
    Command Group 03 
    ASCII HEX Function Description Return Value 
    VXXG0301 56h Xh Xh 47h 30h 33h 30h 31h 0Dh Get Aspect Ratio 
    0:Fill 
    1:4:3 
    2:16:9 
    3:Letter Box 
    4:Native 
    5:Theater Zoom 
    Pn/F 
    VXXS0301n 56h Xh Xh 53h 30h 33h 30h 31h nh 0Dh Set Aspect Ratio 
    0:Fill 
    1:4:3 
    2:16:9 
    3:Letter Box 
    4:Native 
    5:Theater Zoom 
    P/F 
    VXXG0302 56h Xh Xh 47h 30h 33h 30h 32h 0Dh Get Blank 0:Unblank 
    1:Blank Pn/F 
    VXXS0302n 56h Xh Xh 53h 30h 33h 30h 32h nh 0Dh Set Blank 0:Unblank 
    1:Blank P/F 
    VXXG0304 56h Xh Xh 47h 30h 33h 30h 34h 0Dh Get Freeze 0:Unfreeze 
    1:Freeze Pn/F 
    VXXS0304n 56h Xh Xh 53h 30h 33h 30h 34h nh 0Dh Set Freeze 0:Unfreeze 
    1:Freeze P/F 
    VXXG0305 56h Xh Xh 47h 30h 33h 30h 35h 0Dh Get Volume n=0~10 Pn/F 
    VXXS0305n 56h Xh Xh 53h 30h 33h 30h 35h nh 0Dh Set Volume n=0~10 P/F 
    VXXG0308 56h Xh Xh 47h 30h 33h 30h 38h 0Dh Get Projection 
    Mode 
    0:Front 
    1:Rear 
    2:Ceiling 
    3:Rear+Ceiling 
    Pn/F 
    VXXS0308n 56h Xh Xh 53h 30h 33h 30h 38h nh 0Dh  Set Projection 
    Mode 
    0:Front 
    1:Rear 
    2:Ceiling 
    3:Rear+Ceiling 
    P/F 
    VXXG0309 56h Xh Xh 47h 30h 33h 30h 39h 0Dh Get Vertical 
    Keystone Value n=-40~+40 Pn/F 
    VXXS0309n 56h Xh Xh 53h 30h 33h 30h 39h nh 0Dh Set Vertical 
    Keystone Value n=-40~+40 P/F 
    VXXG0311 56h Xh Xh 47h 30h 33h 31h 31h 0Dh Get Zoom n=-10~+10 Pn/F 
    VXXS0311n 56h Xh Xh 53h 30h 33h 31h 31h nh 0Dh Set Zoom n=-10~+10 P/F 
    VXXG0315 56h Xh Xh 47h 30h 33h 31h 35h 0Dh Get 3D Sync  
    0:Off 
    1:DLP-Link 
    2:IR 
    Pn/F  
    						
    							— 76 — 
    Command Group 03 
    ASCII HEX Function Description Return Value 
    VXXS0315n 56h Xh Xh 53h 30h 33h 31h 35h nh 0Dh Set 3D Sync 
    0:Off 
    1:DLP-Link 
    2:IR 
    P/F 
    VXXG0316 56h Xh Xh 47h 30h 33h 31h 36h 0Dh Get 3D Sync Invert 0:Off 
    1:On Pn/F 
    VXXS0316n 56h Xh Xh 53h 30h 33h 31h 36h nh 0Dh Set 3D Sync Invert 0:Off 
    1:On P/F 
    VXXG0317 56h Xh Xh 47h 30h 33h 31h 37h 0Dh Get 3D Format 
    0:Frame 
    Sequential 
    1:Top/Bottom 
    2:Side-By-Side 
    3:Frame 
    Packing  
    Pn/F 
    VXXS0317n 56h Xh Xh 53h 30h 33h 31h 37h nh 0Dh Set 3D Format 
    0:Frame 
    Sequential  
    1:Top/Bottom 
    2:Side-By-Side 
    3:Frame 
    Packing 
    P/F 
     
      
    						
    All Vivitek manuals Comments (0)

    Related Manuals for Vivitek Projector H5095 Series User Manual