Home > Vivitek > Projector > Vivitek Projector DX881ST User Manual

Vivitek Projector DX881ST User Manual

Here you can view all the pages of manual Vivitek Projector DX881ST User Manual. The Vivitek manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 61

— 52 — 
Cleaning the Projector 
Cleaning the projector to remove dust and grime will help ensure trouble-free operation.  
 Warning: 
1. Be sure to turn off and unplug the projector about one hour before cleaning. Failure to do so 
could result in a severe burn. 
2. Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings 
on the projector.  
3. If a little water gets into the projector interior while cleaning, leave unplugged in a well-ventilated 
room for several...

Page 62

– 53 – 
Using the Kensington® Lock 
 
Using the Kensington® Lock 
If you are concerned about security, attach the projector to a permanent object with the Kensington 
slot and a security cable.  
 
Note: 
Contact your vendor for details on purchasing a suitable Kensington security cable.  
The security lock corresponds to Kensington’s MicroSaver Security System. If you have any 
comment, contact: Kensington, 2853 Campus Drive, San Mateo, CA 94403, U.S.A. Tel: 800-535-
4242, http://www.Kensington.com....

Page 63

— 54 — 
TROUBLESHOOTING 
Common problems and solutions 
These guidelines provide tips to deal with problems you may encounter while using the projector. If 
the problem remains unsolved, contact your dealer for assistance. 
Often after time spent troubleshooting, the problem is traced to something as simple as a loose 
connection. Check the following before proceeding to the problem-specific solutions. 
 Use some other electrical device to confirm that the electrical outlet is working. 
 Ensure the...

Page 64

– 55 – 
LED Error Messages 
ERROR CODE MESSAGES POWER LED 
GREEN 
LAMP LED 
RED 
TEMP LED  
RED 
System Initial Flash OFF OFF 
Ready to Power on (Standby) ON OFF OFF 
System Power on Flash OFF OFF 
Lamp Lit , System stable ON OFF OFF 
Cooling Flashing OFF OFF 
1W MCU detects scaler stops working (initial fail) 2 blinks OFF OFF 
Over Temperature OFF OFF ON 
Thermal Break Sensor error 4 blinks OFF OFF 
Lamp Fail 5 blinks OFF OFF 
Lamp Temperature shut down 5 blinks 1 blinks OFF 
Lamp Short circuit in...

Page 65

— 56 — 
1. Position the projector so it is as perpendicular to the screen as possible.  
2. Use the Keystone button on the remote control to correct the problem. 
Problem: The image is reversed  
Check the Projection setting on the Settings 1 menu of the OSD. 
Problem: The image is streaked  
1. Set the Frequency and Tracking settings on the Image->Computer menu of the OSD to 
the default settings. 
2. To ensure the problem is not caused by a connected PC’s video card, connect to another 
computer....

Page 66

– 57 – 
Audio Problems 
Problem: There is no sound 
1. Adjust the volume on the remote control.  
2. Adjust the volume of the audio source. 
3. Check the audio cable connection. 
4. Test the source audio output with other speakers. 
5. Have the projector serviced. 
Problem: The sound is distorted  
1. Check the audio cable connection. 
2. Test the source audio output with other speakers. 
3. Have the projector serviced. 
Having the Projector Serviced 
If you are unable to solve the problem, you should...

Page 67

— 58 — 
HDMI Q & A 
Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI 
cable? 
Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or High-
Speed cables.  
˙Standard (or “category 1”) HDMI cables have been tested to perform at speeds of 75Mhz or 
up to 2.25Gbps, which is the equivalent of a 720p/1080i signal.  
˙High Speed (or “category 2”) HDMI cables have been tested to perform at speeds of 340Mhz 
or up to 10.2Gbps, which is the highest...

Page 68

– 59 – 
SPECIFICATIONS 
Specifications 
Model DX881ST DW882ST 
Display type TI DMD 0.55” XGA TI DMD 0.65” WXGA 
Resolution XGA 1024 x 768 WXGA 1280 x 800 
Projection distance 
0.5m~3.8m 
(The best distance  
range is between 
0.763m~1.273m) 
0.4m~3.2m 
(The best distance  
range is between 
0.779m~1.127m) 
Projection screen size 40~300 
(The Best Size is 60” ~ 100”) 
40~300 
(The Best Size is 70” ~ 100”) 
Projection lens Manual Focus/Fix Zoom 
Zoom ratio Fix 
Vertical keystone correction +/- 40 Degrees...

Page 69

— 60 — 
Model DX813 DW814 
Display type TI DMD 0.55” XGA TI DMD 0.65” WXGA 
Resolution XGA 1024 x 768 WXGA 1280 x 800 
Projection distance 1m~10m 1m~10m 
Projection screen size 25.6” ~ 256.4” 30.2” ~ 302.3” 
Projection lens Manual Focus/Manual Zoom 
Zoom ratio 1.2X 
Vertical keystone correction +/- 40 Degrees 
Projection methods Front, Rear, Desktop/Ceiling (Rear, Front) 
Data compatibility VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA@60hz, Mac 
SDTV/EDTV/ HDTV 480i, 576i, 480p, 576p, 720p, 1080i, 1080p...

Page 70

– 61 – 
Projection Distance vs. Projection Size (DX881ST/DW882ST Series) 
            
Projection Distance and Size Table 
XGA 
DX881ST 
IMAGE DIAGONAL IMAGE WIDTH IMAGE HEIGHT PROJECTION DISTANCE OFFSET-A 
INCH CM INCH CM INCH CM INCH  MM  
40 81.3 32.0 61.0 24.0 50.9 20.0 85 
60 121.9 48.0 91.4 36.0 76.3 30.0 127 
100 203.2 80.0 152.4 60.0 127.2 50.1 212 
150 304.8 120.0 228.6 90.0 190.8 75.1 318 
200 406.4 160.0 304.8 120.0 254.4 100.2 424 
250 508.0 200.0 381.0 150.0 318.0 125.2 530 
300 609.6 240.0...
Start reading Vivitek Projector DX881ST User Manual

Related Manuals for Vivitek Projector DX881ST User Manual

All Vivitek manuals