Vivitek Projector DX881ST User Manual

— 22 — 
Main 
Menu 
 
Sub Menu   
 
Settings 
Settings 2  Auto Source    Off, On 
  No Signal 
Power Off 
   0~180 
  Auto Power 
On 
   Off, On 
  Lamp Mode    ECO , Normal, Dynamic ECO 
  Reset All     
  Status  Active Source   
    Video Information   
    Lamp Hours(ECO, Normal)   
    Software Version   
  Advanced 1  Menu Position  Center, Down, Up, Left, Right 
    Translucent Menu  0%, 25%, 50%, 75%, 100% 
    Low Power Mode  Off, On, On By Lan 
    Fan Speed  Normal, High 
    Lamp Hour Reset...

– 23 – 
Image Menu  
 Attention !   
All of display mode parameters when changed will be saved to user mode.  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image 
Menu. Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to enter 
and change values for settings. 
 
ITEM DESCRIPTION 
Display Mode Press the cursor ◄► button to enter and set the Display Mode.  
Brightness Press the cursor ◄► button to enter and adjust the display brightnessK...

— 24 — 
Computer Menu 
Press the MENU button to open the OSD menu. Press ◄► to move to the Image menu. Press ▲▼ 
to move to the Computer menu and then press Enter or ►. Press ▲▼ to move up and down in the 
Computer menu. 
 
ITEM DESCRIPTION 
Horizontal Position Press the cursor ◄► button to enter and adjust the display position to left or right.  
Vertical Position Press the cursor ◄► button to enter and adjust the display position to up or down.  
Frequency Press the cursor ◄► button to enter and adjust...

– 25 – 
Advanced Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ 
to move to the Advanced menu and then press Enter or ►. Press ▼▲ to move up and down in the 
Advanced menu. 
 
ITEM DESCRIPTION 
Brilliant Color Press the cursor ◄► button to enter and adjust the Brilliant Color valueK 
Sharpness Press the cursor ◄► button to enter and adjust the display SharpnessK 
Gamm~ Press the cursor ◄► button to enter and adjust the gamma correction of the displayK...

— 26 — 
White Balance 
Press the ENTER button to enter the White Balance sub menu.  
 
ITEM DESCRIPTION 
R Gain Press the ◄► buttons to adjust the Red Gain. 
G Gain Press the ◄► buttons to adjust the Green Gain. 
B Gain Press the ◄► buttons to adjust the Blue Gain.  
R Offset Press the ◄► buttons to adjust the Red Offset. 
G Offset Press the ◄► buttons to adjust the Green Offset. 
B Offset Press the ◄► buttons to adjust the Blue Offset. 
  

– 27 – 
Color Manager 
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ 
to move to the Color Manager menu and then press Enter or ►. Press ▼▲ to move up and down in 
the Color Manager menu.  
 
ITEM DESCRIPTION 
Red Select to enter the Red Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Green Select to enter the Green Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Blue Select tç enter the Blue Color...

— 28 — 
Settings 1 Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Settings 1 menu. Press the cursor ▲▼ button to move up and down in the Settings 1 menu. Press 
◄► to enter and change values for settings. 
 
ITEM DESCRIPTION 
Source 
Press the cursor ◄► button to enter the Source menu. oeference input Source 
select 
(Io L KeypadFK 
Projection Press the cursor ◄► button to enter and choose from four projection methods: 
Aspect Ratio Press the cursor ◄►...

– 29 – 
Audio 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press 
▼▲ to move to the Audio menu and then press Enter or ►. Press ▼▲ to move up and down in the 
Audio menu. 
 
ITEM DESCRIPTION 
Volume Press the ◄► buttons to enter and adjust the audio volume.  
Mute Press the ◄► buttons to enter and turn on or off the speaker. 
  

— 30 — 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press 
▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down 
in the Advanced 1 menu. Press ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Language Press the cursor ◄► button to enter and select a different localization MenuK 
Security Lock  Press the cursor ◄► button to enter and enable or disable security lock functionK 
Blank Screen Press...

– 31 – 
3D Setting 
 
ITEM DESCRIPTION 
3D Press the cursor ◄► button to enter and select different 3D modeK 
3D Sync Invert Press the cursor ◄► button to enter and enable or disable 3D Sync InvertK 
3D Format Press the cursor ◄► button to enter and enable or disable different 3D Format. 
 
Note: 
1. The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting. 
2. When the projector is connected to an appropriate 3D source, the 3D OSD menu item is enabled for...