Vivitek Projector DW882ST User Manual
Have a look at the manual Vivitek Projector DW882ST User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 263 Vivitek manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
— 22 —
Main
Menu
Sub Menu
Settings
Settings 2 Auto Source Off, On
No Signal
Power Off
0~180
Auto Power
On
Off, On
Lamp Mode ECO , Normal, Dynamic ECO
Reset All
Status Active Source
Video Information
Lamp Hours(ECO, Normal)
Software Version
Advanced 1 Menu Position Center, Down, Up, Left, Right
Translucent Menu 0%, 25%, 50%, 75%, 100%
Low Power Mode Off, On, On By Lan
Fan Speed Normal, High
Lamp Hour Reset
Projector ID 0-98
Network Network State Connect, Disconnect
DHCP Off, On
IP Address 0~255, 0~255, 0~255. 0~255
Subnet Mask 0~255, 0~255, 0~255. 0~255
Gateway 0~255, 0~255, 0~255. 0~255
DNS 0~255, 0~255, 0~255. 0~255
Apply Ok / Cancel
Advanced 2 Sleep Timer 0~600
Source Filter VGA1 Disable, Enable
VGA2 Disable, Enable
Composite Video Disable, Enable
S-Video Disable, Enable
HDMI Disable, Enable
Wall Color Off, Light Yellow, Pink, Light
Green, Blue, Blackboard
– 23 – Image Menu Attention ! All of display mode parameters when changed will be saved to user mode. Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image Menu. Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to enter and change values for settings. ITEM DESCRIPTION Display Mode Press the cursor ◄► button to enter and set the Display Mode. Brightness Press the cursor ◄► button to enter and adjust the display brightnessK Contrast Press the cursor ◄► button to enter and adjust the display contrastK Computer Press (Enter) / ► to enter the Computer menu. See Computer Menu on page 24. Auto Image Press (Enter) / ► to automatically adjustment for phase, tracking, size and position. Advanced Press (Enter) / ► to enter the Advanced menu. See Advanced Feature on page 25. Color Manager Press (Enter) / ► to enter the color manager menu. See page 27 for more information on Color Manager. ！
— 24 — Computer Menu Press the MENU button to open the OSD menu. Press ◄► to move to the Image menu. Press ▲▼ to move to the Computer menu and then press Enter or ►. Press ▲▼ to move up and down in the Computer menu. ITEM DESCRIPTION Horizontal Position Press the cursor ◄► button to enter and adjust the display position to left or right. Vertical Position Press the cursor ◄► button to enter and adjust the display position to up or down. Frequency Press the cursor ◄► button to enter and adjust the A/D sampling clock. Tracking Press the cursor ◄► button to enter and adjust the A/D sampling dot.
– 25 – Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Advanced menu and then press Enter or ►. Press ▼▲ to move up and down in the Advanced menu. ITEM DESCRIPTION Brilliant Color Press the cursor ◄► button to enter and adjust the Brilliant Color valueK Sharpness Press the cursor ◄► button to enter and adjust the display SharpnessK Gamm~ Press the cursor ◄► button to enter and adjust the gamma correction of the displayK Color Temperature Press the cursor ◄► button to enter and adjust the color temperature. Video AGC Press the ◄► buttons to enter and enable or disable the Automatic Gain Control for video sourceK Video Saturation Press the ◄► buttons to enter and adjust the video saturation. Video Tint Press the ◄► buttons to enter and adjust the video tint/hue. White Balance Press the ENTER/ ► button to enter the White Balance sub menu. See White Balance on page 26
— 26 — White Balance Press the ENTER button to enter the White Balance sub menu. ITEM DESCRIPTION R Gain Press the ◄► buttons to adjust the Red Gain. G Gain Press the ◄► buttons to adjust the Green Gain. B Gain Press the ◄► buttons to adjust the Blue Gain. R Offset Press the ◄► buttons to adjust the Red Offset. G Offset Press the ◄► buttons to adjust the Green Offset. B Offset Press the ◄► buttons to adjust the Blue Offset.
– 27 – Color Manager Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Color Manager menu and then press Enter or ►. Press ▼▲ to move up and down in the Color Manager menu. ITEM DESCRIPTION Red Select to enter the Red Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Green Select to enter the Green Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Blue Select tç enter the Blue Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Cyan Select to enter the Cyan Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Magent~ Select to enter the Magenta Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Yellow Select to enter the Yellow Color Manager. Press the◄► buttons to adjust the Hue, Saturation, and Gain. White Select to enter the White Color Manager. Press the ◄► buttons to adjust the Red, Green, and BlueK
— 28 —
Settings 1 Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
Settings 1 menu. Press the cursor ▲▼ button to move up and down in the Settings 1 menu. Press
◄► to enter and change values for settings.
ITEM DESCRIPTION
Source
Press the cursor ◄► button to enter the Source menu. oeference input Source
select
(Io L KeypadFK
Projection Press the cursor ◄► button to enter and choose from four projection methods:
Aspect Ratio Press the cursor ◄► button to enter and adjust the video aspect ratio.
Keystone Press the cursor ◄► button to enter and adjust the display keystone.
Digital Zoom Press the cursor ◄► button to enter and adjust the Digital Zoom menu.
Audiç Press (EnterF / ► to enter the Audio menu. See Audio on page 29.
Advanced 1 Press (Enter) / ► to enter the Advanced 1 menu. See Advanced 1 Feature on
page 30.
Advanced 2 Press (Enter) / ► to enter the Advanced 2 menu. See Advanced 2 Feature on
page 32.
– 29 – Audio Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▼▲ to move to the Audio menu and then press Enter or ►. Press ▼▲ to move up and down in the Audio menu. ITEM DESCRIPTION Volume Press the ◄► buttons to enter and adjust the audio volume. Mute Press the ◄► buttons to enter and turn on or off the speaker.
— 30 — Advanced 1 Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down in the Advanced 1 menu. Press ◄► to enter and change values for setting. ITEM DESCRIPTION Language Press the cursor ◄► button to enter and select a different localization MenuK Security Lock Press the cursor ◄► button to enter and enable or disable security lock functionK Blank Screen Press the cursor ◄► button to enter and select different color to blank the screenK Splash Logç Press the cursor ◄► button tç enter and select splash logoK Closed Captioning Press the ◄► buttons to enter and enable or disable Closed CaptioningK Keypad Lock Press the cursor ◄► button to enter and enable or disable keys can be work on keypadK 3D Setting Press Enter/ ► to enter the 3D menu. See page 31 for more information on 3D Setting. Note: To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD device under the 3D Disc Menu.
– 31 – 3D Setting ITEM DESCRIPTION 3D Press the cursor ◄► button to enter and select different 3D modeK 3D Sync Invert Press the cursor ◄► button to enter and enable or disable 3D Sync InvertK 3D Format Press the cursor ◄► button to enter and enable or disable different 3D Format. Note: 1. The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting. 2. When the projector is connected to an appropriate 3D source, the 3D OSD menu item is enabled for selection. 3. Use 3D glasses to view a 3D image. 4. You need 3D content from a 3D DVD or 3D media file. 5. You need to enable the 3D source (some 3D DVD content may have a 3D on-off selection feature). 6. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a driver on your PC and connect a USB emitter. 7. The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D). 8. Power on the glasses. Glasses normally have a power on -off switch. Each type of glasses has their own configuration instructions. Please follow the configuration instructions that come with your glasses to finish the setup process. Note: Since different types of glass (DLP link or IR shutter glass) have their own setting instructions, Please follow the guide to finish the setup process.