Vivitek Projector DH558 User Manual

							— 22 — 
Advanced Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ 
to move to the Advanced menu and then press Enter or ►. Press ▼▲ to move up and down in the 
Advanced menu. 
 
ITEM DESCRIPTION 
Brilliant Color Press the cursor ◄► button to enter and adjust the Brilliant Color value. 
Sharpness Press the cursor ◄► button to enter and adjust the display Sharpness. 
Gamma Press the cursor ◄► button to enter and adjust the gamma correction of the display. 
Color Temperature Press the cursor ◄► button to enter and adjust the color temperature. 
Video AGC Press the ◄► buttons to enter and enable or disable the Automatic Gain Control for 
video source. 
Video Saturation Press the ◄► buttons to enter and adjust the video saturation. 
Video Tint Press the ◄► buttons to enter and adjust the video tint/hue. 
White Balance Press the ENTER / ► button to enter the White Balance sub menu.  
See White Balance on page 23 
  
						

							– 23 – 
White Balance 
Press the ENTER button to enter the White Balance sub menu.  
 
ITEM DESCRIPTION 
R Gain Press the ◄► buttons to adjust the Red Gain. 
G Gain Press the ◄► buttons to adjust the Green Gain. 
B Gain Press the ◄► buttons to adjust the Blue Gain.  
R Offset Press the ◄► buttons to adjust the Red Offset. 
G Offset Press the ◄► buttons to adjust the Green Offset. 
B Offset Press the ◄► buttons to adjust the Blue Offset.  
						

							— 24 — 
Color Manager 
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ 
to move to the Color Manager menu and then press Enter or ►. Press ▼▲ to move up and down in 
the Color Manager menu.  
 
ITEM DESCRIPTION 
Red Select to enter the Red Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Green Select to enter the Green Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Blue Select to enter the Blue Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Cyan Select to enter the Cyan Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Magenta Select to enter the Magenta Color janager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Yellow Select to enter the Yellow Color Manager.  
Press the◄► buttons to adjust the Hue, Saturation, and Gain. 
White Select to enter the White Color Manager.  
Press the ◄► buttons to adjust the Red, Green, and Blue. 
 
  
						

							– 25 – 
Settings 1 Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Settings 1 menu. Press the cursor ▲▼ button to move up and down in the Settings 1 menu. Press 
◄► to enter and change values for settings. 
 
ITEM DESCRIPTION 
Source 
Press the cursor ◄► button to enter the Source menu. oeference input Source 
select 
(Io / Keypad). 
Projection Press the cursor ◄► button to enter and choose from four projection methods: 
Aspect Ratio Press the cursor ◄► button to enter and adjust the video aspect ratio. 
Keystone Press the cursor ◄► button to enter and adjust the display keystone. 
Digital Zoom  Press the cursor ◄► button to enter and adjust the Digital Zoom menu.  
Audio Press  (Enter) / ► to enter the Audio menu. See Audio on page 26. 
Advanced 1 Press  (Enter) / ► to enter the Advanced 1 menu. See Advanced 1 Feature on 
page 27. 
Advanced 2 Press  (Enter) / ► to enter the Advanced 2 menu. See Advanced 2 Feature on 
page 29. 
     
						

							— 26 — 
Audio 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press 
▼▲ to move to the Audio menu and then press Enter or ►. Press ▼▲ to move up and down in the 
Audio menu. 
 
ITEM DESCRIPTION 
Volume Press the ◄► buttons to enter and adjust the audio volume.  
Mute Press the ◄► buttons to enter and turn on or off the speaker. 
  
						

							– 27 – 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press 
▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down 
in the Advanced 1 menu. Press ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Language Press the cursor ◄► button to enter and select a different localization Menu. 
Security Lock  Press the cursor ◄► button to enter and enable or disable security lock function. 
Blank Screen Press the cursor ◄► button to enter and select different color to blank the screen. 
Splash Logo Press the cursor ◄► button t enter and o select splash logo on or off. 
Closed Captioning Press the ◄► buttons to enter and enable or disable Closed Captioning 
Keypad Lock Press the cursor ◄► button to enter and enable or disable keys can be work on 
keypad. 
3D Setting Press Enter/ ► to enter the 3D menu. See page 28 for more information on 3D 
Setting. 
Note:  
To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD device under the 
3D Disc Menu. 
   
						

							— 28 — 
3D Setting 
 
ITEM DESCRIPTION 
3D Press the cursor ◄► button to enter and select different 3D mode. 
3D Sync Invert Press the cursor ◄► button to enter and enable or disable 3D Sync Invert. 
3D Format Press the cursor ◄► button to enter and enable or disable different 3D Format. 
 
Note: 
1. The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting. 
2. When the projector is connected to an appropriate 3D source, the 3D OSD menu item is enabled for 
selection. 
3. Use 3D glasses to view a 3D image. 
4. You need 3D content from a 3D DVD or 3D media file. 
5. You need to enable the 3D source (some 3D DVD content may have a 3D on-off selection feature). 
6. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a 
driver on your PC and connect a USB emitter. 
7. The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D). 
8. Power on the glasses. Glasses normally have a power on -off switch.  
Each type of glasses has their own configuration instructions. Please follow the configuration 
instructions that come with your glasses to finish the setup process. 
 
Note:  
Since different types of glass (DLP link or IR shutter glass) have their own setting instructions, 
Please follow the guide to finish the setup process.  
						

							– 29 – 
Advanced 2 Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press 
▲▼ to move to the Advanced 2 menu and then press Enter or ►. Press ▲▼ to move up and down 
in the Advanced 2 menu. Press ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Test Pattern Press the cursor ◄► button to enter and select internal test pattern. 
H Image Shift Press the cursor ◄► button to enter and select H Image Shift. 
V Image Shift Press the cursor ◄► button to enter and select V Image Shift. 
  
						

							— 30 — 
Settings 2 Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Settings 2 menu. Press the cursor ▲▼ button to move up and down in the Settings 2 menu.  
 
ITEM DESCRIPTION 
Auto Source Press the cursor ◄► button to enter and enable or disable automatic source 
detection.  
No Singal Power 
Off (min.) 
Press the cursor ◄► button to enter and enable or disable automatic shutdown of 
lamp when no signal.  
Auto Power On Press the cursor ◄► button to enter and enable or disable automatic power On when AC 
power is supplied. 
Lamp Mode Press the cursor ◄► button to enter and select the lamp mode for higher brightness 
or lower brightness to save lamp life. 
Reset All Press  (Enter) / ► to reset all settings to default values. 
Status Press  (Enter) / ► to enter the Status menu. See page 31 for more information on 
Status. 
Advanced 1 Press  (Enter) / ► to enter the Advanced N menu. See Advanced 1 Feature on 
page 32. 
Advanced 2 Press  (Enter) / ► to enter the Advanced 2 menu. See Advanced 2 Feature on 
page 34. 
Note : 
Dynamic ECO: Auto power consumption saving according to your dynamic content (30% Max saving on 
blank screen). 
Extreme Dimming: Saving 50% lamp power consumption by blank screen (press BLANK button)  
      
						

							– 31 – 
Status 
Press the cursor ▲▼ button to move up and down in the Settings 2 menu. Select the Status menu 
and press Enter or ► to enter. 
 
ITEM DESCRIPTION 
Active Source Display the activated source. 
Video Information Displays resolution/video information for RGB source and color standard for Video 
source. 
Lamp Hours Lamp hour used information is displayed. ( ECO. and Normal ) 
Software Version Showing system software version.