Vivitek Projector D967 User Manual

							DLP Projector—User’s Manual 
Advanced Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Image menu. Press  ▼▲ 
to move to the  Advanced menu and then press  Enter or ►. Press  ▼▲ to move up and down in the 
Advanced  menu. 
 
ITEM DESCRIPTION 
Brilliant Color  Press the cursor ◄► button to enter and adjust the Brilliant Color value. 
Sharpness  Press the cursor ◄► button to enter and adjust the display sharpness. 
Gamma  Press the cursor ◄► button to enter and adjust the gamma correction of the display. 
Color Temperature  Press the cursor ◄► button to enter and adjust the color temperature. 
Video AGC  Press the cursor 
◄► button to enter and enable or disable the Automatic Gain Control 
for video source. 
Video Saturation  Press the cursor ◄► button to enter and adjust the video saturation. 
Video Tint  Press the cursor ◄► button to enter and adjust the video tint/hue. 
 
– 23  –  
						

							DLP Projector—User’s Manual 
Color Manager 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Image menu. Press  ▼▲ 
to move to the  Color Manager  menu and then press  Enter or ►. Press  ▼▲ to move up and down in 
the  Color Manager  menu.  
 
ITEM DESCRIPTION 
Red  Select to enter the Red Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Green  Select to enter the Green Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Blue  Select to enter the Blue Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Cyan  Select to enter the Cyan Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Magenta  Select to enter the Magenta Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Yellow  Select to enter the Yellow Color Manager.  
Press the
◄► buttons to adjust the Hue, Saturation, and Gain. 
White  Select to enter the White Color Manager.  
Press the 
◄► buttons to adjust the Red, Green, and Blue. 
 
 
—  24 —  
						

							DLP Projector—User’s Manual 
Settings 1 Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the 
Settings 1  menu. Press the cursor  ▲▼ button to move up and down in the  Settings 1 menu. Press 
◄►  to
 enter and change values for settings. 
 
ITEM DESCRIPTION 
Source  Press the cursor 
◄► button to enter the Source menu. Reference input Source select
(IR / Keypad). 
Projection  Press the cursor ◄► button to enter and choose from four projection methods: 
Aspect Ratio  Press the cursor ◄► button to enter and adjust the video aspect ratio. 
Keystone  Press the cursor ◄► button to enter and adjust the display keystone. 
Digital Zoom   Press the cursor ◄► button to enter and adjust the Digital Zoom menu.  
Audio Press  (Enter) / ► to enter the Audio menu. See  Audio on page  26. 
Advanced 1  Press  (Enter) / 
► to enter the Advanced 1 menu. See  Advanced 1 Feature on 
page  27. 
Advanced 2  Press  (Enter) / 
► to enter the Advanced 2 menu. See  Advanced 2 Feature on 
page  29. 
 
– 25  –  
						

							DLP Projector—User’s Manual 
Audio 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 1 menu. Press 
▼▲  to move to the  Audio menu and then press Enter  or ►. Press  ▼▲ to move up and down in the 
Audio menu. 
 
ITEM DESCRIPTION 
Volume  Press the cursor ◄► button to enter and adjust the audio volume.  
Mute  Press the cursor ◄► button to enter and turn on or off the speaker. 
 
— 26 —  
						

							DLP Projector—User’s Manual 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 1 menu. Press 
▲▼  to move to the  Advanced 1 menu and then press  Enter or ►. Press ▲▼ to move up and down 
in the  Advanced 1  menu. Press  ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Language  Press the cursor ◄► button to enter and select a different localization Menu. 
Security Lock   Press the cursor ◄► button to enter and enable or disable security lock function. 
Blank Screen  Press the cursor ◄► button to enter and select different color to blank the screen. 
Splash Logo  Press the cursor ◄► button to enter and select splash logo. 
Closed Captioning  Press the cursor ◄► button to enter and enable or disable Closed Captioning 
Keypad Lock  Press the cursor 
◄► button to enter and enable or disable keys can be work on 
keypad. 
Note :  Hold the cursor ▼  button on keypad for 5 seconds to unlock keypad 
3D Setting  Press  (Enter) / 
►to enter the 3D menu. See page  28 for more information on  3D 
Setting. 
Screen Capture  Press  (Enter) / 
► to capture screen, and please wait saving picture. 
Picture will auto showing after next power on. 
Note:  
To enjoy the 3D function, first  enable the Play Movie in 3D setting  found in your DVD device under the 
3D Disc Menu. 
 
– 27  –  
						

							DLP Projector—User’s Manual 
3D Setting 
 
ITEM DESCRIPTION 
3D Press the cursor ◄► button to enter and select different 3D mode. 
3D Sync Invert  Press the cursor ◄► button to enter and enable or disable 3D Sync Invert. 
3D Format  Press the cursor ◄► button to enter and enable or disable different 3D Format. 
 
Note: 
1. The 3D OSD menu item is gray if there is no  appropriate 3D source. This is the default setting. 
2.  When the projector is connected to an appropria te 3D source, the 3D OSD menu item is enabled for 
selection. 
3.  Use 3D glasses to view a 3D image. 
4.  You need 3D content from a 3D DVD or 3D media file. 
5.  You need to enable the 3D source (some 3D DVD  content may have a 3D on-off selection feature). 
6.  You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a 
driver on your PC and connect a USB emitter. 
7.  The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D). 
8.  Power on the glasses. Glasses normally have a power on -off switch.  
Each type of glasses has their own configuration instructions.  Please follow the configuration 
instructions that come with your glasses to finish the setup process. 
 
Note:  
Since different types of glass (D LP link or IR shutter glass) have their own setting instructions, 
Please follow the guide to finish the setup process. 
— 28 —  
						

							DLP Projector—User’s Manual 
Advanced 2 Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 1 menu. Press 
▲▼  to move to the  Advanced 2 menu and then press  Enter or ►. Press ▲▼ to move up and down 
in the  Advanced 2  menu. Press  ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Test Pattern  Press the cursor ◄► button to enter and select internal test pattern. 
H Image Shift  Press the cursor ◄► button to enter and select H Image Shift. 
V Image Shift  Press the cursor ◄► button to enter and select V Image Shift. 
 
– 29  –  
						

							DLP Projector—User’s Manual 
Settings 2 Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the 
Settings 2  menu. Press the cursor  ▲▼ button to move up and down in the  Settings 2 menu.  
 
ITEM DESCRIPTION 
Auto Source  Press the cursor 
◄► button to enter and enable or disable automatic source 
detection.  
No Signal Power 
Off (min.)  Press the cursor 
◄► button to enter and enable or disable automatic shutdown of 
lamp when no signal.  
Auto Power On  Press the cursor 
◄► button to enter and enable or disable automatic power On when 
AC power is supplied. 
Lamp Mode  Press the cursor 
◄► button to enter and select the lamp mode for higher brightness 
or lower brightness to save lamp life. 
Note:  
Remarks to Dynamic ECO of ImageCareTM 
1. Shut-down is not allowed when the projector is boot up less than one minute 
2. To protect the lamp, when a shut-down command  is received, the lamp mode is forced to be 
reset to Normal and the system will automatically shut down 10 seconds later 
Reset All  Press  (Enter) / ► to reset all settings to default values. 
Status  Press  (Enter) / 
► to enter the Status menu. See page  31 for more information on 
Status . 
Advanced 1  Press  (Enter) / 
► to enter the Advanced 1 menu. See  Advanced 1 Feature on 
page  32. 
Advanced 2  Press  (Enter) / 
► to enter the Advanced 2 menu. See  Advanced 2 Feature on 
page  44. 
—  30 —  
						

							DLP Projector—User’s Manual 
Status 
Press the cursor ▲▼ button to move up and down in the  Settings 2 menu. Select the Status menu 
and press  Enter or ► to enter.
 
 
ITEM DESCRIPTION 
Active Source  Display the activated source. 
Video Information Displays resolution/video information for RGB source and color standard for Video 
source. 
Lamp Hours 
Lamp hour used information is displayed. ( ECO. and Normal) 
Serial Number  Showing serial number of product. 
 
– 31  –  
						

							DLP Projector—User’s Manual 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 2 menu. Press 
▲▼  to move to the  Advanced 1 menu and then press  Enter or ►. Press ▲▼ to move up and down 
in the  Advanced 1  menu. Press  ◄► to
 enter and change values for setting. 
 
ITEM DESCRIPTION 
Menu Position  Press the cursor ◄► button to enter and select different OSD location. 
Translucent Menu  Press the cursor ◄► button to enter and select OSD background translucent level.  
Low Power Mode  Press the cursor ◄► button to enter and turn Low Power Mode on or off. 
Fan Speed  Press the cursor 
◄► button to enter and toggle between Normal and High fan 
speeds.  
Note: We recommend selecting high speed in high temperatures, high humidity, or 
high altitude (higher than 1500m/4921ft) areas. 
Lamp Hour Reset  After replacing the lamp, this item should be reset. See page 
33 for more information 
on  Lamp Hour Reset . 
Projector ID   Press the cursor 
◄► button to enter and adjust a two digit projector ID from 00 
through 98. 
Network Press  (Enter) /  ► to enter the Network menu. See page  33 for more information 
on 
Network.  
 
—  32 —