Vivitek H9080 User Manual
Have a look at the manual Vivitek H9080 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 263 Vivitek manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
56
5.2 Troubleshooting Tips
Table 5-1 provides some general guidelines for troubleshooting problems \
you may encounter with the H9080FD. If the
suggested solutions fail to resolve the problem or if you encounter an i\
ssue not described here, please contact Vivitek
Technical Support.
SymptomPossible Cause(s)Solution
The projector does not turn on.The H9080FD is not plugged in or
the AC outlet is not active.
•Ensure that the H9080FD is
plugged in and that the AC outlet
is active.
•
The remote...](http://img.usermanuals.tech/thumb/5166/58770/w64_vivitek_h9080-user-manual-55.png "Page 56
56
5.2 Troubleshooting Tips
Table 5-1 provides some general guidelines for troubleshooting problems \
you may encounter with the H9080FD. If the
suggested solutions fail to resolve the problem or if you encounter an i\
ssue not described here, please contact Vivitek
Technical Support.
SymptomPossible Cause(s)Solution
The projector does not turn on.The H9080FD is not plugged in or
the AC outlet is not active.
•Ensure that the H9080FD is
plugged in and that the AC outlet
is active.
•
The remote...")
![Page 58
5
6.2 RS-232 Commands
There are 2 types of commands:
Key commands
Operation commands
All commands start with 2 letters as shown in the following:
“ky” for key commands.
“op” for operations commands.
Key Commands
The following example is the syntax for key commands:
ky [CR]
IR Codes and Keynames
No.Code 1KeynameRemote ButtonDescription
1.0x01pow.onTurn power on.
2.0x09pow.offTurn power off.
3.0x15menuBring up or cancel menu display.
4.0x17enterKey pad enter.
5.0x18cur.downKey pad down arrow....](http://img.usermanuals.tech/thumb/5166/58770/w64_vivitek_h9080-user-manual-57.png "Page 58
5
6.2 RS-232 Commands
There are 2 types of commands:
Key commands
Operation commands
All commands start with 2 letters as shown in the following:
“ky” for key commands.
“op” for operations commands.
Key Commands
The following example is the syntax for key commands:
ky [CR]
IR Codes and Keynames
No.Code 1KeynameRemote ButtonDescription
1.0x01pow.onTurn power on.
2.0x09pow.offTurn power off.
3.0x15menuBring up or cancel menu display.
4.0x17enterKey pad enter.
5.0x18cur.downKey pad down arrow....")
![Page 60
60
Operations Commands
The following example is the syntax for operations commands:
op [CR]
No.FunctionCommandAction on unit
1Set= Makes the unit take that value.
2Get?Asks what the current value is.
3Increment+Adds 1 to the current value.
4Decrement-Subtracts 1 from the current value.
5Execute(none)Performs an action.
Table 6-2: Operations Command Functions
OperationCommandValuesNotes
aspect= ?
0 = 16:9
1 = Letterbox
2 = 4:3
3 = 4:3 Narrow
4 = Native
memory= ?
0 = User Memory 1
1 = User Memory...](http://img.usermanuals.tech/thumb/5166/58770/w64_vivitek_h9080-user-manual-59.png "Page 60
60
Operations Commands
The following example is the syntax for operations commands:
op [CR]
No.FunctionCommandAction on unit
1Set= Makes the unit take that value.
2Get?Asks what the current value is.
3Increment+Adds 1 to the current value.
4Decrement-Subtracts 1 from the current value.
5Execute(none)Performs an action.
Table 6-2: Operations Command Functions
OperationCommandValuesNotes
aspect= ?
0 = 16:9
1 = Letterbox
2 = 4:3
3 = 4:3 Narrow
4 = Native
memory= ?
0 = User Memory 1
1 = User Memory...")
61 OperationCommandValuesNotes overscan= ? 0 = Off 1 = Crop 2 = Zoom source.sel= ? 0 = HDMI 1 1 = HDMI 2 2 = RGB 3 = YPbPr 1 4 = YPbPr 2 5 = S-Video 6 = Video 7 = SCART pip.select= ? 0 = Off 1 = HDMI 1 2 = HDMI 2 3 = RGB 4 = YPbPr 1 5 = YPbPr 2 6 = S-Video 7 = Video 8 = SCART resync(execute) color.space= ? 0 = Auto 1 = REC709 2 = REC601 3 = RGB-PC 4 = RGB-Video video.stand= ? 0 = Auto 1 = NTSC 2 = PAL 3 = SECAM gamma= ? 0 = CRT 1 = Film 2 = Cinema 3 = Bright 4 = Graphics color.temp= ? 0 = Warm 1 = Standard 2 = Cool 3 = Cooler dlp.frame= ? 0 = Auto 2 = 48 Hz 3 = 50 Hz 4 = 60 Hz color.gamut= ? 0 = Auto 1 = REC709 2 = SMPTE C 3 = EBU 4 = Native 5 = DCI serial inTerfaCe speCifiCaTions
6 OperationCommandValuesNotes dblack= ? 0 = Off 1 = On (4x DB) 2 = Ultra-DI (8x DB) 3 = Infinity red.off= ? + -0-200 green.off= ? + -0-200 blue.off= ? + -0-200 red.gain= ? + -0-200 green.gain= ? + -0-200 blue.gain= ? + -0-200 vert.pos= ? + -0-200 horiz.pos= ? + -0-200 phase= ? + -0-200 tracking= ? + -0-200 sync.level= ? + -0-200 pip.pos= ? 0 = Top left 1 = Top right 2 = Bottom left 3 = Bottom right 4 = PBP 5 = Split screen menu.pos= ? 0 = Top left 1 = Top right 2 = Bottom left 3 = Bottom right 4 = Center blank.screen= ? 0 = Black 1 = Blue 2 = White 3 = Logo auto.pow.off= ?0 = Off 1 = On auto.pow.on= ?0 = Off 1 = On rear.proj= ?0 = Off 1 = On ceil.mode= ? 0 = Off 1 = On 2 = Auto logo.disp= ?0 = Off 1 = On serial inTerfaCe speCifiCaTions
6 OperationCommandValuesNotes trig.1= ? 0 = LED 1 = 16:9 2 = Letterbox 3 = 4:3 4 = 4:3 Narrow 5 = RS232 6 = On 7 = Off trig.2= ? 0 = LED 1 = 16:9 2 = Letterbox 3 = 4:3 4 = 4:3 Narrow 5 = RS232 6 = On 7 = Off auto.source= ?0 = Off 1 = On model.name ? ser.number ? soft.version ? act.source ? 0 = HDMI 1 1 = HDMI 2 2 = RGB 3 = YPbPr 1 4 = YPbPr 2 5 = S-video 6 = Video 7 = SCART pip.source ? 0 = HDMI 1 1 = HDMI 2 2 = RGB 3 = YPbPr 1 4 = YPbPr 2 5 = S-video 6 = Video 7 = SCART h.refresh ?KHz v.refresh ?Hz pixel.clock ?MHz signal ? led.hours ? total.hours ? led.reset(execute) fact.reset(execute) blue.only=0 = Off 1 = On serial inTerfaCe speCifiCaTions
64 OperationCommandValuesNotes pattern= 0 = White 1 = Black 2 = Red 3 = Green 4 = Blue 5 = Cyan 6 = Magenta 7 = Yellow 8 = ANSI Checkerboard 9 = Horizontal Gray Ramp 10 = Focus Grid 11 = Off language= ? 0 = English 1 = Spanish 2 = French 3 = German 4 = Dutch 5= Italian 6 = Traditional Chinese 7 = Simplified Chinese OSD language only Table 6-3: Operations Commands serial inTerfaCe speCifiCaTions
65 7.1 H9080FD Specifications Table 7-1 lists the H9080FD specifications. Optics MicrodisplayTI DLP 1080p 0.95” DMD Resolution1920x1080, Full HD Projection LensStandard Lens throw ratio: 1.85 to 2.4:1 Optional Lens throw ratio: 1.56 to 1.86:1 • • Lens ShiftVertical ± 120% Horizontal ± 30% • • Image width range8ft to 30 ft (see screen size table) Electrical I/O - Video Input DB15 pin RGB 2 x HDMI Component 1 - RCA Component 2 - BNC Composite (RCA) S-Video • • • • • • I/O - Power InputIEC-320-C14receptacle Projector Control Hard wired via RS-232 IR Remote Keypad control method • • • Zoom/Focus/OffsetsManual lens shift, Manual zoom/focus Projection ModesFront/ Rear/ Ceiling (Front/Rear) Power Input Voltage: 100 ~ 240V Power Consumption 110V: BrilliantColor ON 280W, BrilliantColor OFF 240W, Standby
66 Mechanical Weight (without packing) 16.6Kg / 36.6lb Dimensions 520(W) x 224.60(H) x 548(D) mm Adjustable feet 2” max travel Reliability Operating Temperature 7500 ft.~10000 ft. (2286m ~ 3048m): 50 ~ 95°F (10 ~ 35°C), Humidity: 0% ~ 85% Under 7,500 ft. (2286m): 50 ~ 104°F (10 ~ 40°C), Humidity: 0% ~ 85% • • Storage -4 ~ 140°F (-20 ~ 60°C), Humidity: 5% ~ 90% Standard Accessories Power Cord US 110VAC Remote and Batteries For set up use only HDMI Cable For set up use only User Manual CD For set up use only Warranty Card Inspection Card Q Pass Label For set up use only Allen Wrench For lens shift adjustment Note: Specifications are subject to change without notice. Table 7-1: H9080FD Specifications SPECIFICATIONS
67 7.2 H9080FD Dimensions Figure 7-1 shows the H9080FD dimensions, in millimeters. 539 mm548 mm 520 mm 520 mm 410.00 mm 224.60 mm 224.60 mm 548 mm 220.00 mm CEILING MOUNT HOLES M4 x 4 APPROXIMATE CENTER OF GRAVITY LENS CENTER LINE MAX: M4*L8 MAX: M4*L8 MAX: M4*L8 MAX: M4*L8 Figure 7-1: H9080FD Dimensions speCifiCaTions
6 7.3 Supported Timings Table 7-2 lists the signal types supported by each input on the H9080FD.\ FormatResolutionRefresh Rate (Hz) Supported? (ü = Yes) RGBComponent1 ComponentHDMI 1 HDMI Composite S-Video PC640x48059.94üü 640x48075üü 640x48085üü 800x60060.32üü 800x60075üü 800x60085.06üü 848x48047.95üü 848x48059.94üü 1024x76860üü 1024x76875.03üü 1024x76885.03üü 1280x72047.95üü 1280x102460.02üü 1280x102475.02üü 1280x102485.02üü 1600x120060üü 1920x108047.95üü 1680x105059.94üü Apple Mac640x48066.59üü 832x62474.54üü NTSCNTSC (M, 4.43)59.94ü PALPAL (B, G, H, I)50ü PAL (N)50ü PAL (M)59.94ü SECAMSECAM (M)50ü speCifiCaTions
6 FormatResolutionRefresh Rate (Hz) Supported? (ü = Yes) RGBComponent1 ComponentHDMI 1 HDMI Composite S-Video SDTV480i59.94üü 576i50üü EDTV480p59.94üüü 576p50üüü HDTV720p50üüü 720p59.94üüü 720p60üüü 1035i60üüü 1080i50üüü 1080i (Aus)50üüü 1080i59.94üüü 1080i60üüü 1080p23.98üüü 1080p24üüü 1080p25üüü 1080p29.97üüü 1080p30üüü 1080p50üüü 1080p59.94üüü 1080p60üüü Table 7-2: Supported Signal Timings by Input speCifiCaTions
70 7.4 Projection Distance and Screen Size NoteScreen Size: This is the size of the screen not the size of the projection. In case of display 16:9 picture on the whole 16:9 Screen 16:9 ScreenTR: 1.85~2.4TR = PD / SWUnit: Inch Screen SizeProjection Distance DiagonalWidthHeightMin.Max. 6052.29 29.41 96.74 125.50 7061.01 34.32 112.87 146.42 7262.75 35.30 116.09 150.60 8069.72 39.22 128.99 167.34 8271.47 40.20 132.21 171.52 8473.21 41.18 135.44 175.71 9078.44 44.12 145.11 188.26 9280.18 45.10 148.34 192.44 10087.16 49.02 161.24 209.17 10692.38 51.97 170.91 221.72 11095.87 53.93 177.36 230.09 120104.59 58.83 193.49 251.01 123107.20 60.30 198.32 257.28 133115.92 65.20 214.45 278.20 135117.66 66.18 217.67 282.38 150130.73 73.54 241.86 313.76 170148.16 83.34 274.10 355.59 200174.31 98.05 322.48 418.35 250217.89 122.56 403.09 522.93 300261.47 147.07 483.71 627.52 speCifiCaTions