Vivitek H5082 User Manual

							
D
D
D L
L
L P
P
P  
 
  P
P
P r
r
r o
o
o j
j
j e
e
e c
c
c t
t
t o
o
o r
r
r  
 
  –
–
–  
 
  U
U
U s
s
s e
e
e r
r
r ’
’
’ s
s
s  
 
  M
M
M a
a
a n
n
n u
u
u a
a
a l
l
l  
 
 
PICTURE: Advanced Menu 
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the  
PICTURE: Advanced  menu. Press the cursor  ▲▼ button to move up and down in the  
PICTURE: Advanced  menu. Press ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Noise Reduction Press the cursor  ◄► button to adjust the Noise Reduction.  
Color Temperature Press the cursor ◄►  button to set the Color Temperature. 
Press the cursor ◄► button to adjust the gamma correction of the display. 
Notes: This function is only available in User 1/ 2/ 3 mode. Gamma 
Press the cursor ◄►  button to set the Color Gamut. 
(Range: Native/  Cinema/ HDTV/ EBU/ SMPTE-C) Color Gamut 
Press the  ENTER button to enter the  HSG Adjustment sub menu.  
See  HSG Adjustment  on page HSG Adjustment 26. 
Press the cursor ◄►  button to set the Color Space. 
(Range:  Auto/ RGB/ SDTV/ HDTV) 
Notes: This function is only available when HDMI input source is selected. 
Color Space 
Press the cursor ◄►  button to set the DynamicBlack. 
DynamicBlack enables the projector to automatically optimize the display of dark movie 
scenes enabling them to be shown in incredible  detail to the overall brightness of darker 
scenes resulting in a better black level and incredible detail. 
(Range:  Cinema 1 / Cinema 2/ Off). 
DynamicBlack 
Press the cursor ◄►  button to adjust the IRIS. 
(Range: 1 to 9). IRIS 
Press the  ENTER button to enter the  ViviSettings sub menu. 
See ViviSettings ViviSettings  on page 26. 
–  25  – 
Downloaded From projector-manual.com Vivitek Manuals 
						

							
D
D
D L
L
L P
P
P  
 
  P
P
P r
r
r o
o
o j
j
j e
e
e c
c
c t
t
t o
o
o r
r
r —
—
— U
U
U s
s
s e
e
e r
r
r ’
’
’ s
s
s  
 
  M
M
M a
a
a n
n
n u
u
u a
a
a l
l
l  
 
 
HSG Adjustment 
Press the ENTER  button to enter the  HSG Adjustment sub menu.  
 
ITEM DESCRIPTION 
Press the ◄► buttons to set the Primary Color. 
Notes: There are six sets ( R/ G/ B/ C/ M/ Y) of colors to be customized. Primary Color 
Hue Press  the ◄►  buttons to adjust the Hue. 
Saturation Press  the ◄►  buttons to adjust the Saturation. 
Gain Press  the ◄►  buttons to adjust the Gain. 
 
ViviSettings 
Press the ENTER  button to enter the  ViviSettings sub menu. 
 
ITEM DESCRIPTION 
Press the ◄► buttons to select different MEMC level. 
(Range: Off / Low / Medium / High) ViviMotion 
Press the  ◄► buttons to adjust motion adaptive sharpness enhancement (2D Peaking) value. 
(Range: 0 to 3) ViviPeaking 
Press the  ◄► buttons to select different Flesh Tone. 
(Range: 0 to 5) 
Notes: This function is only available when Component Video or S-Video input source is  
selected. 
Flesh Tone 
– 26 –  
Downloaded From projector-manual.com Vivitek Manuals 
						

							
D
D
D L
L
L P
P
P  
 
  P
P
P r
r
r o
o
o j
j
j e
e
e c
c
c t
t
t o
o
o r
r
r  
 
  –
–
–  
 
  U
U
U s
s
s e
e
e r
r
r ’
’
’ s
s
s  
 
  M
M
M a
a
a n
n
n u
u
u a
a
a l
l
l  
 
 
DISPLAY Menu  
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the 
DISPLAY  menu. Press the cursor  ▲▼ button to move up and down in the  DISPLAY menu.  
Press  ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Press the cursor ◄►  button to set the Aspect Ratio. 
(Range:  Auto/ 16:9/ 4:3/ Letter Box/ Real) Aspect Ratio 
Press the cursor ◄►  button to adjust the Keystone. 
Notes: This function is available when the  Auto keystone function is turned off. Keystone 
Overscan Press the cursor ◄►  button to adjust the Overscan. 
Press the ENTER button to enter the  PC Detail Adjustment  sub menu.  
See  PC Detail Adjustment  on page PC Detail Adjustment 28. 
– 27  – 
Downloaded From projector-manual.com Vivitek Manuals 
						

							
D
D
D L
L
L P
P
P  
 
  P
P
P r
r
r o
o
o j
j
j e
e
e c
c
c t
t
t o
o
o r
r
r —
—
— U
U
U s
s
s e
e
e r
r
r ’
’
’ s
s
s  
 
  M
M
M a
a
a n
n
n u
u
u a
a
a l
l
l  
 
 
PC Detail Adjustment 
Press the ENTER  button to enter the  PC Detail Adjustment  sub menu. 
Note: 
Customizing the settings in  PC Detail Adjustment menu is only available when PC input source 
(analog RGB) is selected. 
 
 
ITEM DESCRIPTION 
Press the ENTER/AUTO  button on the control panel or the  ENTER/AUTO button on the 
remote control to automatically adjust frequency, phase, and position. Auto 
Frequency Press  the ◄►  buttons to adjust the A/D sampling number. 
Phase Press  the ◄►  buttons to adjust the A/D sampling clock. 
Horizontal Position Press the  ◄► buttons to adjust the display position right or left.  
Vertical Position Press the  ◄► buttons to adjust the display position up or down. 
– 28 –  
Downloaded From projector-manual.com Vivitek Manuals 
						

							
D
D
D L
L
L P
P
P  
 
  P
P
P r
r
r o
o
o j
j
j e
e
e c
c
c t
t
t o
o
o r
r
r  
 
  –
–
–  
 
  U
U
U s
s
s e
e
e r
r
r ’
’
’ s
s
s  
 
  M
M
M a
a
a n
n
n u
u
u a
a
a l
l
l  
 
 
SYSTEM SETUP:  Basic Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the 
SYSTEM SETUP: Basic  menu. Press the cursor ▲▼ button to move up and down in the  
SYSTEM SETUP: Basic  menu. Press ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Press the cursor ◄►  buttons to select a different localization menu. 
(Range: English/ Danish/ Dutch/ Finnish/ French/ German/ Italian/ Japanese/ Ko-
rea/Norwegian/ Polish/ Portuguese/ Russian/ Traditional Chinese/ Simplified Chinese/ 
Spanish/ Swedish) 
Language 
Press the cursor ◄►  buttons to select a different startup screen. 
(Range:  Vivitek/ Blue/ Black) Splash Logo 
Press the cursor ◄►  buttons to choose from four projection methods:  
Front Table / Front Ceiling/ Rear Table/ Rear Ceiling. Projection 
Press the cursor ◄►  buttons to set the Blank Screen timer. The projected image is automati-
cally restored after the set time. 
(Range:  Disable/ 5 min/ 10 min/ 15 min/ 20 min/ 25 min/ 30 min) 
Blank Timer  
Press the cursor ◄►  buttons to set the Auto Power Off timer. The projector automatically 
turns off if no input source is detect ed after the preset period of time. 
(Range:  Disable/ 5 min/ 10 min/ 15 min/ 20 min/ 25 min/ 30 min) 
Auto Power Off 
Press the cursor ◄►  buttons to set Sleep timer. The projector automatically turns off after the 
preset period of time.  
(Range:  Disable/ 30 min/ 1hr/ 2hr/ 3hr/ 4hr/ 8hr/ 12hr) 
Sleep Timer 
Press the cursor ◄►  buttons to select the background color when no input source is detected. 
(Range: Purple/ Black/ Blue) Background Color  
Press the  ENTER button to enter the  Menu Settings sub menu. See  Menu Settings on page Menu Settings 30.
Source Press the ENTER  button to enter the  Source sub menu. See Source  on page 30. 
– 29  – 
Downloaded From projector-manual.com Vivitek Manuals 
						

							
D
D
D L
L
L P
P
P  
 
  P
P
P r
r
r o
o
o j
j
j e
e
e c
c
c t
t
t o
o
o r
r
r —
—
— U
U
U s
s
s e
e
e r
r
r ’
’
’ s
s
s  
 
  M
M
M a
a
a n
n
n u
u
u a
a
a l
l
l  
 
 
Menu Settings 
Press the ENTER  button to enter the  Menu Settings sub menu. 
 
ITEM DESCRIPTION 
Press the ◄► buttons to select from five OSD locations:  
Top-Left/ Top-Right/  Center/ Bottom-Left/ Bottom-Right. Menu Position 
Press the  ◄► buttons to set the Menu Display timer before the OSD times out. 
(Range: 5sec/ 10sec/  15sec/ 20sec/ 25sec/ 30sec) Menu Display Time 
 
Source 
Press the ENTER  button to enter the  Source sub menu. 
 
ITEM DESCRIPTION 
PC Press the ◄►  buttons to enable or disable the PC source. 
HDMI 1 
– 30 –  
HDMI 2 Press the  ◄► buttons to enable or disable the HDMI source. 
HDMI 3 
Component Press the  ◄► buttons to enable or disable the Component source. 
Video Press  the ◄►  buttons to enable or disable the Video source. 
S-Video Press  the ◄►  buttons to enable or disable the S-Video source. 
Press the  ◄► buttons to enable or disable Quick Auto Search for available input source. 
Notes: When the desired source is selected, the Qu ick Auto Search function will be turn off. Quick Auto Search 
Downloaded From projector-manual.com Vivitek Manuals 
						

							
D
D
D L
L
L P
P
P  
 
  P
P
P r
r
r o
o
o j
j
j e
e
e c
c
c t
t
t o
o
o r
r
r  
 
  –
–
–  
 
  U
U
U s
s
s e
e
e r
r
r ’
’
’ s
s
s  
 
  M
M
M a
a
a n
n
n u
u
u a
a
a l
l
l  
 
 
SYSTEM SETUP: Advanced Menu  
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the 
SYSTEM SETUP: Advanced  menu. Press the cursor ▲▼ button to move up and down in the 
SYSTEM SETUP: Advanced  menu.  
 
ITEM DESCRIPTION 
Lamp Press the ENTER  button to enter the  Lamp sub menu. See  Lamp on page 32. 
HDMI Press  the ENTER  button to enter the  HDMI sub menu. See  HDMI on page 32. 
Press the cursor ◄►  buttons to turn on or off High Altitude Mode when the altitude of the 
environment is higher than 1500m, or the temperature is over 40°C. High Altitude Mode 
Press the  ENTER button to enter the  Closed Caption sub menu.  
See  Closed Caption  on page Closed Caption 33. 
Press the cursor ◄►  buttons to select the LED control.  
Select  Normal  for normal LED display and Off to disable LED display. LED Control 
Press the cursor ◄►  buttons to turn on or off 12V OUT A. 
When connected to the screen  through a commercially available cable, the screen deploys 
automatically on start up of the projector. The  screen retracts when the projector is powered 
off. 12V OUT A 
12V OUT B Press the cursor  ◄► buttons to turn on or off 12V OUT B. 
Press the cursor ◄►  buttons to select a lens type. 
(Range: Short /  Standard / Long/) Lens Type 
Press the ENTER button to enter reset all settings to default values. Reset All 
– 31  – 
Downloaded From projector-manual.com Vivitek Manuals 
						

							
D
D
D L
L
L P
P
P  
 
  P
P
P r
r
r o
o
o j
j
j e
e
e c
c
c t
t
t o
o
o r
r
r —
—
— U
U
U s
s
s e
e
e r
r
r ’
’
’ s
s
s  
 
  M
M
M a
a
a n
n
n u
u
u a
a
a l
l
l  
 
 
– 32 –  
 Lamp 
Press the  ENTER button to enter the  Lamp sub menu. 
 
ITEM DESCRIPTION 
Lamp Mode  Press the  ◄► buttons to adjust lamp brightness. 
Reset Lamp Timer  Press the  ENTER button to reset the Lamp Hour after the lamp is replaced. 
Lamp Hour  Displays the number of hours the lamp has been in use. 
 
HDMI 
Press the  ENTER button to enter the  HDMI sub menu. 
 
ITEM DESCRIPTION 
HDMI Format  Press the 
◄► buttons to select from three HDMI display formats: 
Auto/ PC signal/ Video signal. 
HDMI Amplifier Gain  Press the  ◄► buttons to adjust HDMI Amplifier Gain. 
 
Downloaded From projector-manual.com Vivitek Manuals 
						

							
D
D
D L
L
L P
P
P  
 
  P
P
P r
r
r o
o
o j
j
j e
e
e c
c
c t
t
t o
o
o r
r
r  
 
  –
–
–  
 
  U
U
U s
s
s e
e
e r
r
r ’
’
’ s
s
s  
 
  M
M
M a
a
a n
n
n u
u
u a
a
a l
l
l  
 
 
Closed Caption 
Press the ENTER  button to enter the  Closed Caption sub menu. 
 
ITEM DESCRIPTION 
Closed Caption Enable Press the ◄► buttons to turn on or off Closed Caption. 
Caption Version Press the  ◄► buttons to select the Caption Version. 
 
12V OUT A 
Set 12V OUT A  to On to enable the projector to automatica lly lower the projection screen when pow-
ering on. When powering off, screen trigger stops  sending a low voltage trigger to the screen 
controller and the screen goes up. 
 
 
–  33  – 
Downloaded From projector-manual.com Vivitek Manuals 
						

							
D
D
D L
L
L P
P
P  
 
  P
P
P r
r
r o
o
o j
j
j e
e
e c
c
c t
t
t o
o
o r
r
r —
—
— U
U
U s
s
s e
e
e r
r
r ’
’
’ s
s
s  
 
  M
M
M a
a
a n
n
n u
u
u a
a
a l
l
l  
 
 
INFORMATION Menu 
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the  
INFORMATION Menu .  
 
ITEM DESCRIPTION 
Source Displays the activated input source. 
Resolution Displays the native resolution of input source. 
Lamp Hour Displays the number of hours the lamp has been in use. 
Firmware Version Displays the firmware version of the projector. 
Note:  
Information displayed in this menu is for viewing only and cannot be edited. 
 
– 34 – 
Downloaded From projector-manual.com Vivitek Manuals