Vivitek Dw3351 User Manual

— 54 — 
3. Press ▼ to select Broadcasting and press ◄ / ► to select On. 
 
4. Open pwPresenter and select the Multicast Setting tab. 
5. Click Search and click Apply. 
6. From the Multi-cast drop-down menu select the broadcasting device (IP address).  
 
7. Select the channel as it is setup in the projector Broadcasting menu. 
 
8. Press Connect to broadcast the captured screen from the computer.  

 
– 55 – 
Note: 
The function requires the pwPresenter software available on the provided CD. 
This function is only available when the Network Display source is selected. 
Minimum system requirements: Intel® Core 2 Dou, 2.4GHz CPU, 2G DDR. 
Remote Desktop Control through pwPresenter 
pwPresenter provides remote desktop control function for the projector. 
1. Setup a login account (User name and Password) in pwPresenter. Enter the user name in the 
Name field. 
2. Designate a password for read-only...

— 56 — 
5. Select the radio button and click Yes to enable the remote control/audio capture/screen capture 
function. 
 
When you installing the pwPresenter, the operating system’s default language is selected for 
pwPresenter. If a language is not available, English is selected. 
a. You can select whether to allow notification message popup. 
b. Once you set to activate 1:N display, 1PC/NB can display up to 8 projectors at the same 
time. 
c. Once set, press Apply to save the changes. 
d. You can select...

 
– 57 – 
7. Enter the Account and Password the same as defined in Remote Desktop Control through 
pwPresenter. 
 
8. Select Connect and press ENTER to connect to the selected PC. 
9. Connect USB keyboard or mouse to control the host PC’s desktop through the projector. 
• Remote Desktop Control does not support PC Standby mode. 
• Remote Desktop Control only supports LAN source so the projector source is fixed on LAN. 
 
Presenting From a USB Reader 
This feature displays a slide show of images stored on...

— 58 — 
USB Reader menu 
The USB Reader menu displays only when a USB device source is selected. This menu is includes a 
slideshow feature for selecting settings. 
 
ITEM DESCRIPTION 
Slideshow Press the ENTER button to start slideshow. 
Slideshow Direction Press the cursor ◄ / ► buttons to select a slideshow direction. 
Slideshow Timing Press the cursor ◄ / ► buttons to select the image display frequency. 
Repeat Slideshow Press the cursor ◄ / ► buttons to turn on or off the repeat slideshow function....

 
– 59 – 
RS232 by Telnet Function 
The projector supports RS232 control functionality through Telnet by using a RJ45 connection. 
Quick Start-Guide for TELNET 
Obtain the projector’s IP-Address. Make sure the projector is properly setup to function within the local 
network. 
1. Disable any Windows Firewall settings to allow for Telnet access. 
 
2. Navigate to Start > All Programs > Accessories and select Command Prompt. The command 
window displays. 
 
3. In the command window, type the IP address of...

— 60 — 
Enabling TELNET in Windows VISTA and Windows 7 
By default installation for Windows VISTA the Telnet function is not enabled. It is enabled by configuring 
Windows features.. 
1. Navigate to Start > Control Panel in Windows Vista. 
 
2. Select Programs to continue. 
 
3. Select Turn Windows features on or off to open the Windows Features window. 
4. Scroll down until the Telnet Client feature is displayed.  

 
– 61 – 
5. Click the radio box to enable the Telnet Client feature. 
 
6. Click OK to continue. 
The feature requires additional Windows configuration. 
 
RS232 Spec sheet for Telnet 
1. Telnet: TCP. 
2. Telnet port: 23 (for further information, contact the system administrator). 
3. In console mode, type Telnet.exe to open the Windows console utility. 
4. Disconnect from RS232-by-Telnet normally: 
Close Windows Telnet utility after Telnet connection is established. 
5. Limitation 1 for Telnet-Control:...

— 62 — 
INFORMATION Menu 
Press the MENU button to open the OSD menu. Press the cursor ◄ / ► buttons to move to the 
INFORMATION Menu. 
 
ITEM DESCRIPTION 
Source Displays the activated input source. 
Picture Mode Displays picture mode for projection. 
Lamp Mode Displays lamp mode for projection. 
Resolution Displays the native resolution of input source. 
3D Info Displays 3D image information for projection. 
Lamp Hour 
(Normal, ECO, 
Total) 
Displays the number of hours the lamp has been in use. 
Air...

 
– 63 – 
MAINTENANCE AND SECURITY 
Replacing the Projection Lamp 
The projection lamp should be replaced when it burns out. It should only be replaced with a certified 
replacement part, which you can order from your local dealer.  
 Important: 
a. The projection lamp used in this product contains a small amount of mercury. 
b. Do not dispose this product with general household waste. 
c. Disposal of this product must be carried out in accordance with the regulations of your local  
authority....