Vivitek Dw3351 User Manual

— 34 — 
3D Setting 
Press the ENTER button to enter the 3D Setting sub menu. 
 
ITEM DESCRIPTION 
3D Mode Press the cursor ◄ / ► buttons to select different 3D mode. 
3D Sync Press the cursor ◄ / ► buttons to select different 3D Sync. 
3D Sync Invert Press the cursor ◄ / ► buttons to enable or disable 3D Sync Invert.  

 
– 35 – 
SYSTEM SETUP >> Basic Menu 
Press the MENU button to open the OSD menu. Press the cursor ◄ / ► buttons to move to the SYSTEM 
SETUP >> BASIC menu. Press the cursor ▲ / ▼ buttons to move up and down in the  
SYSTEM SETUP >> BASIC menu. Press the cursor ◄ / ► buttons to change values for settings. 
 
ITEM DESCRIPTION 
Presentation Timer Press the ENTER button to the presentation timer menu. See Presentation Timer on 
page 36. 
Language Press the cursor ◄ / ► buttons to select a different...

— 36 — 
Presentation Timer 
The Presentation Timer function can indicate the presentation time on the screen to help you achieve 
better time management when giving presentations. 
 
ITEM DESCRIPTION 
Timer Period Press the cursor ◄ / ► buttons to select timer period (1 ~ 240). 
Timeê Press the cursor ◄ / ► buttons to enable or disable presentation timer. 
Menu Settings 
Press the ENTER button to enter the Menu Settings sub menu. 
 
ITEM DESCRIPTION 
Menu Display Time Press the cursor ◄ / ► buttons to...

 
– 37 – 
SYSTEM SETUP >> Advanced Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄ / ► buttons to move to the SYSTEM 
SETUP >> Advanced menu. Press the cursor ▲ / ▼ buttons to move up and down in the SYSTEM 
SETUP >> Advanced menu.  
 
ITEM DESCRIPTION 
High Altitude Mode 
Press the cursor ◄ / ► buttons to turn on or off high ~ltitude mode.  
Recommended to turn on when the altitude of the environment is higher than 1500m 
(4921ft). 
Audio Settings Press the ENTER button to enter...

— 38 — 
Audio Settings 
Press the ENTER button to enter the Audio Settings sub menu. 
 
ITEM DESCRIPTION 
Mute Press the cursor ◄ / ► buttons to turn on or off the speaker.  
Volume Press the cursor ◄ / ► buttons to adjust the audio Volume. 
Out Press the cursor ◄ / ► buttons to select audio output connector. 
Note: When select Off, the default sound is output from speakers. 
 
Lamp Settings 
Press the ENTER button to enter the Lamp Setting sub menu. 
 
ITEM DESCRIPTION 
Lamp Mode Press the cursor ◄ / ►...

 
– 39 – 
Closed Caption 
Press the ENTER button to enter the Closed Caption sub menu. 
 
ITEM DESCRIPTION 
Closed Caption 
Enable Press the cursor ◄ / ► buttons to turn on or off Closed Caption. 
Caption Version Press the cursor ◄ / ► buttons to select the Caption Version. 
 
Network Settings 
Press the ENTER button to enter the Network Settings sub menu. 
 
ITEM DESCRIPTION 
Wired LAN Press the ENTER button to enter the Wired LAN sub menu. See Wired LAN on page 
40. 
Wireless LAN Press the ENTER button...

— 40 — 
Wired LAN 
Press the ENTER button to enter the Wired LAN sub menu. 
 
ITEM DESCRIPTION 
Status Displays the network connection status. 
DHCP 
Press the cursor ◄ / ► buttons to turn DHCP On or Off.  
Note: If you select DHCP Off, complete the IP Address, Subnet Mask, Gateway, and 
DNS fields. 
IP Address  Enter a valid IP address if DHCP is turned off. 
Subnet Mask Enter a valid Subnet Mask if DHCP is turned off. 
Default Gateway Displays the default Gateway address on the network. 
DNS Server...

 
– 41 – 
Supported External Devices 
This projector supports command inputs from a Crestron Electronics controller and related software 
(RoomView ®), for further information: http://www.crestron.com/ 
This projector supports the AMX (Device Discovery), for further information: http://www.amx.com/ 
This projector complies and supports Extron device(s), for further information: http://www.extron.com/ 
For more information on the external devices and their related control commands supported through the...

— 42 — 
 
3. Click Change adapter settings to continue. 
4. Right-click on Local Area Connection, and select Properties. 
 
5. In the Properties window, select the Networking tab and select Internet Protocol (TCP/IP). 
6. Click Properties. 
 
 
7. Click Use the following IP address and fill in the IP address and Subnet mask.  
For this example, the IP address used is as follows: 
IP address: 10.10.10.99 
Subnet mask: 255.255.255.0 
8. Click OK to save the settings.  

 
– 43 – 
 
9. On the projector (remote control) press the MENU button. 
10. Select SYSTEM SETUP >> Advanced >> Network Settings >> Wired LAN. The Wired LAN 
screen displays. 
11. Change the IP Address and the Subnet Mask. Make sure the network settings are compatible with 
those on the computer. The project and computer must be configured to use the same subnet, see 
the following example. 
Example: 
Projector IP settings: 10.10.10. X (whereas, X is a number between 1 and 254).  
Subnet Mask:...