Vivitek Dw3321 User Manual
Here you can view all the pages of manual Vivitek Dw3321 User Manual. The Vivitek manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
— 24 —
MAIN MENU SUB MENU SETTINGS
SYSTEM
SETUP >>
Advanced
High Altitude
Mode
Off, On
Audio Settings Mute Off, On
Volume 0 ~ 10
Out Off, Mini, RCA
Lamp Settings Lamp Mode Normal, ECO, Dynamic ECO
Reset Lamp Timer Yes, No
Total Lamp Hour
Test Pattern Off, Grid, White, Red, Green,
Blue, Black
Closed Caption Closed Caption
Enable
Off, On
Caption Version CC1, CC2, CC3, CC4
Low Power Mode Off, On, On By Lan
Network Settings Wired Lan...
Page 32
– 25 –
MAIN MENU SUB MENU SETTINGS
INFORMATION Source
Picture Mode
Lamp Mode
Resolution
3D Info
Lamp Hour
(Normal, ECO,
Total)
Air filter hour
Firmware Version
Remote ID
S/N
Page 33
— 26 — PICTURE >> Basic Menu Press the MENU button to open the OSD menu. Press the cursor ◄ / ► buttons to move to the PICTURE >> Basic menu. Press the cursor ▲ / ▼ buttons to move up and down in the PICTURE >> Basic menu. Press the cursor ◄ / ► buttons to change values for settings. Note: Customizing the settings in PICTURE >> Basic menu is only available in User 1 / 2 mode. ITEM DESCRIPTION Display Mode Press the cursor ◄ / ► buttons to set the display mode. Note: The DISCOM SIM mode...
Page 34
– 27 – PICTURE >> Advanced Menu Press the MENU button to open the OSD menu. Press the cursor ◄ / ► buttons to move to the PICTURE >> Advanced menu. Press the cursor ▲ / ▼ buttons to move up and down in the PICTURE >> Advanced menu. Press the cursor ◄ / ► buttons to change values for settings. ITEM DESCRIPTION Brilliant Color Press the cursor ◄ / ► buttons to set the brilliant color. Color Temperature Press the cursor ◄ / ► buttons to set the color temperature. Wall Color Press the cursor ◄...
Page 35
— 28 — HSG Adjustment Press the ENTER button to enter the HSG Adjustment sub menu. ITEM DESCRIPTION Primary Color Press the cursor ◄ / ► buttons to set the Primary Color. Hue Press the cursor ◄ / ► buttons to adjust the Hue. Saturation Press the cursor ◄ / ► buttons to adjust the Saturation. Gain Press the cursor ◄ / ► buttons to adjust the Gain. User Color Temp Press the ENTER button to enter the User Color Temp sub menu. ITEM DESCRIPTION White Gain Red Press the cursor ◄ / ► buttons to...
Page 36
– 29 – White Balance Press the ENTER button to enter the White Balance sub menu. ITEM DESCRIPTION Red Gain Press the cursor ◄ / ► buttons to adjust the Red Gain. Green Gain Press the cursor ◄ / ► buttons to adjust the Green Gain. Blue Gain Press the cursor ◄ / ► buttons to adjust the Blue Gain. Red Offset Press the cursor ◄ / ► buttons to adjust the Red Offset. Green Offset Press the cursor ◄ / ► buttons to adjust the Green Offset. Blue Offset Press the cursor ◄ / ► buttons to adjust the...
Page 37
— 30 — DISPLAY Menu Press the MENU button to open the OSD menu. Press the cursor ◄ / ► buttons to move to the DISPLAY menu. Press the cursor ▲ / ▼ buttons to move up and down in the DISPLAY menu. Press the cursor ◄ / ► buttons to change values for settings. ITEM DESCRIPTION Aspect Ratio Press the cursor ◄ / ► buttons to set the ~spect êatio. Note: Without support when 3D mode activated. Vertical Keystone Press the cursor ◄ / ► buttons to adjust the vertical âeystone. Horizontal Keystone Press...
Page 38
– 31 –
4 Corner
Press the ENTER button to enter the 4 Corner sub menu.
1. Press the cursor ▲ / ▼ / ◄ / ► buttons to select a corner and press ENTER.
2. Press the cursor ▲ / ▼ buttons to adjust vertical and press the cursor ◄ / ► buttons to
adjust horizontal.
3. Press ENTER to save the settings.
Page 39
— 32 —
Pincushion
Press the ENTER button to enter the Pincushion sub menu.
1. Press the cursor ▲ / ▼ buttons to select one or both side and press ENTER.
Note:
Only one Pincushion setting will be stored so if you want to change from the previous direction to
the other, the notice message will pop-up to remind you to reset the previous Pincushion setting.
2. Press the cursor ▲ / ▼ / ◄ / ► buttons to adjust the desired side convex or concave.
3. Press ENTER to save the settings.
Page 40
– 33 – PC Detail Adjustment Press the ENTER button to enter the PC Detail Adjustment sub menu. Note: Customizing the settings in PC Detail Adjustment menu is only available when PC input source (analog RGB) is selected. ITEM DESCRIPTION Auto Press the ENTER/AUTO buttons on the control panel or the ENTER/AUTO buttons on the remote control to automatically adjust frequency, phase, and position. Frequency Press the cursor ◄ / ► buttons to adjust the A/D sampling number. Phase Press the cursor...