Vivitek Dh758ust User Manual

							— 23— 
Advanced Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press 
▼▲ to move to the Advanced menu and then press Enter or ►. Press ▼▲ to move up and 
down in the Advanced menu. 
 
ITEM DESCRIPTION 
Brilliant Color Press the cursor ◄► button to enter and adjust the Brilliant Color valueK 
Sharpness Press the cursor ◄► button to enter and adjust the display sharpness. 
Gamm~ Press the cursor ◄► button to enter and adjust the gamma correction of the displayK 
Color Temperature Press the cursor ◄► button to enter and adjust the color temperature. 
Video AGC Press the ◄► buttons to enter and enable or disable the Automatic Gain Control for 
video sourceK 
Video Saturation Press the ◄► buttons to enter and adjust the video saturation. 
Video Tint Press the ◄► buttons to enter and adjust the video tint/hue. 
  
						

							— 24— 
Color Manager 
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press 
▼▲ to move to the Color Manager menu and then press Enter or ►. Press ▼▲ to move up and 
down in the Color Manager menu.  
 
ITEM DESCRIPTION 
Red Select to enter the Red Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Green Select to enter the Green Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Blue Select to enter the Blue Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Cyan pelect to enter the Cyan Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Magent~ Select to enter the Magenta Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Yellow Select to enter the Yellow Color Manager.  
Press the◄► buttons to adjust the Hue, Saturation, and Gain. 
White Select to enter the White Color Manager.  
Press the ◄► buttons to adjust the Red, Green, and BlueK 
 
  
						

							— 25— 
Settings 1 Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Settings 1 menu. Press the cursor ▲▼ button to move up and down in the Settings 1 menu. 
Press ◄► to enter and change values for settings. 
 
ITEM DESCRIPTION 
Source Press the cursor  (Enter) / ► button to enter the Source menuK oeference input 
Source select (Io L Keypad). 
Projection Press the cursor ◄► button to enter and choose from four projection methodsK 
Aspect Ratio Press the cursor ◄► button to enter and adjust the video aspect ratio. 
Keystone Press the cursor ◄► button to enter and adjust the display keystone. 
Digital Zoom  Press the cursor ◄► button to enter and adjust the Digital Zoom menu.  
Audio Press  (EnterF / ► to enter the Audio menu. See Audio on page 26. 
Advanced 1 Press  (Enter) / ► to enter the Advanced 1 menu. See Advanced 1 Feature on 
page 27. 
Advanced 2 Press  (Enter) / ► to enter the Advanced 2 menu. See Advanced 2 Feature on 
page 29. 
      
						

							— 26— 
Audio 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. 
Press ▼▲ to move to the Audio menu and then press Enter or ►. Press ▼▲ to move up and 
down in the Audio menu. 
 
ITEM DESCRIPTION 
Volume Press the ◄► buttons to enter and adjust the audio volume.  
Mute Press the ◄► buttons to enter and turn on or off the speaker. 
  
						

							— 27— 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. 
Press ▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up 
and down in the Advanced 1 menu. Press ◄► to enter and change values for setting. 
 
 
ITEM DESCRIPTION 
Language Press the cursor ◄► button to enter and select a different localization Menu. 
Security Lock  Press the cursor ◄► button to enter and enable or disable security lock functionK 
Blank Screen Press the cursor ◄► button to enter and select different color to bl~nk the screen. 
Splash Logo Press the cursor ◄► button to enter and select splash logoK 
Closed Captioning Press the cursor ◄► buttons to enter and enable or disable Closed Captioning 
Keypad Lock Press the cursor ◄► button to enter and enable or disable keys can be work on 
keypadK 
3D Setting Press  (Enter) / ► to enter the 3D menu. See page 28 for more information on 3D 
Setting. 
Screen Capture Press  (Enter) / ► to capture screen, and please wait saving picture.  
Picture will auto showing after next power on. 
Note:  
To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD device under 
the 3D Disc Menu. 
    
						

							— 28— 
3D Setting 
 
ITEM DESCRIPTION 
3D Press the cursor ◄► button to enter and select different 3D modeK 
3D Sync Invert Press the cursor ◄► button to enter and enable or disable 3D Sync InvertK 
3D Format Press the cursor ◄► button to enter and enable or disable different 3D Format. 
 
Note: 
1. The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting. 
2. When the projector is connected to an appropriate 3D source, the 3D OSD menu item is enabled 
for selection. 
3. Use 3D glasses to view a 3D image. 
4. You need 3D content from a 3D DVD or 3D media file. 
5. You need to enable the 3D source (some 3D DVD content may have a 3D on-off selection 
feature). 
6. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a 
driver on your PC and connect a USB emitter. 
7. The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D). 
8. Power on the glasses. Glasses normally have a power on -off switch.  
Each type of glasses has their own configuration instructions. Please follow the configuration 
instructions that come with your glasses to finish the setup process. 
 
Note:  
Since different types of glass (DLP link or IR shutter glass) have their own setting instructions, 
Please follow the guide to finish the setup process.  
						

							— 29— 
Advanced 2 Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. 
Press ▲▼ to move to the Advanced 2 menu and then press Enter or ►. Press ▲▼ to move up 
and down in the Advanced 2 menu. Press ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Test Pattern Press the cursor ◄► button to enter and select internal test patternK 
H Image Shift Press the cursor ◄► button to enter and select H Image ShiftK 
V Image Shift Press the cursor ◄► button to enter and select V Image ShiftK 
  
						

							— 30— 
Settings 2 Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Settings 2 menu. Press the cursor ▲▼ button to move up and down in the Settings 2 menu.  
 
ITEM DESCRIPTION 
Auto Source Press the cursor ◄► button to enter and enable or disable automatic source 
detection.  
No Signal Power 
Off (min.) 
Press the cursor ◄► button to enter and enable or disable automatic shutdown of 
lamp when no signal.  
Auto Power On Press the cursor ◄► button to enter and enable or disable automatic power On when 
AC power is suppliedK 
Lamp Mode Press the cursor ◄► button to enter and select the lamp mode for higher brightness 
or lower brightness to save lamp life. 
Reset All Press  (Enter) / ► to reset all settings to default values. 
Status Press  (Enter) / ► to enter the Status menu. See page 31 for more information on 
Status. 
Advanced 1 Press  (Enter) / ► to enter the Advanced 1 menu. See Advanced 1 Feature on 
page 32. 
Advanced 2 Press  (Enter) / ► to enter the Advanced 2 menu. See Advanced 2 Feature on 
page 43. 
Note : 
“Dynamic ECO”: Press BLANK button, Lamp will dim to 30% automatically.  
      
						

							— 31— 
Status 
Press the cursor ▲▼ button to move up and down in the Settings 2 menu. Select the Status 
menu and press Enter or ► to enter. 
 
ITEM DESCRIPTION 
Active Source Display the activated source. 
Video Information Displays resolution/video information for RGB source and color standard for Video 
source. 
Lamp Hours Lamp hour used information is displayed. (Eco, Normal, Dynamic Eco ) 
Serial Number Showing serial number of product. 
Software Version Showing system software version. 
  
						

							— 
32 —  Advanced 1 Feature 
Press the 
Menu button to open the OSD  menu. Press ◄► to move to the  Settings 2 menu. 
Press ▲▼ to move to the  Advanced 1 menu and then press  Enter or ►. Press ▲▼ to move up 
and down in the  Advanced 1 menu. Press ◄► to  enter and change values for setting.  I TEM   D ESCRIPTION  
Menu Position   Press   ◄► button to   enter and select different OSD location.  
Translucent Menu   Press ◄► button to   enter and select OSD background translucent level. 
Low Power Mode   Press ◄►
 button to enter and turn Low Power Mode  Off, On or On By Lan.Fan Speed   Press the cursor ◄► button to   en ter and toggle between Normal and High fan 
speeds.  
Note : We recommend selecting high speed in high temperatures, high humidity, or 
high altitude   (higher than 1500m/4921ft)   areas.  
Lamp Hour Reset   After replacing the lamp, this item should be reset. See pag e  33   for more information 
on   Lamp Hour Reset .  
Projector ID  Press the cursor ◄► button   to   enter and adjust  a two digit projector ID from 0 0  
through 9 8 .  
Network   Press    (Enter) / ► to enter the Network menu. See page  33   for more information on  
Network .  
Note:  
About “On By Lan”, RJ45 will support to be waked up 
in this mode (Under 6W)  but scalar  won’t.