Vivitek D940vx Projector User Manual

							
DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr   –––   UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
Computer Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Com-
puter menu. Press the cursor ▲▼ button to move up and down in the computer menu. Press ◄► to 
change values for settings. 
 
ITEM DESCRIPTION 
Horizontal Position Press the cursor ◄► button to adjust the display position to left or right.  
Vertical Position Press the cursor ◄► button to adjust the display position to up or down.  
Frequency Press the cursor ◄► button to adjust the A/D sampling clock. 
Tracking Press the cursor ◄► button to adjust the A/D sampling dot. 
Auto Image Press  (Enter) / ► to automatically adjustment for phase, tracking, size and position. 
 
– 25 –  
						

							
DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
Video/Audio Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Video/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu. 
Press ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Video AGC Press the ◄► buttons to enable or disable the Automatic Gain Control for video source. 
Video Saturation Press the ◄► buttons to adjust the video saturation. 
Video Tint Press the ◄► buttons to adjust the video tint/hue. 
Film Mode Press the ◄► buttons to select a different film mode.  
Video Overscan Press the ◄► buttons to enable or disable video over scan. 
Audio Press  (Enter) / ► to enter the Audio menu. See Audio on page 27. 
Reset Press  (Enter) / ► to reset all settings to default values. 
 
Note: 
Video jagging may occur when playing interlace video. To overcome this issue, open the  
Video / Audio menu and adjust the Film Mode feature.  
 
– 26 –  
						

							
DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr   –––   UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
Audio 
Press  (Enter) / ► to enter the Audio sub menu. 
 
ITEM DESCRIPTION 
Volume Press the ◄► buttons to adjust the audio volume.  
(Range: 0 ~ 8) 
Mute Press the ◄► buttons to turn on or off the speaker. 
Audio Input Press the cursor ◄► button to select audio input.  
(Range: Mini ~ RCA) 
 
 
– 27 –  
						

							
DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
Installation I Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installa-
tion I menu. Press the cursor ▲▼ button to move up and down in the Installation I menu. Press 
◄► to change values for settings. 
 
ITEM DESCRIPTION 
Language Press the cursor ◄► button to select a different localization Menu. 
Blank Screen Press the cursor ◄► button to select different color to blank the screen. 
Projection Press the cursor ◄► button to choose from four projection methods: 
Security Lock  Press the cursor ◄► button to enable or disable security lock function. 
Aspect Ratio Press the cursor ◄► button to adjust the video aspect ratio. 
Keystone Press the cursor ◄► button to adjust the display keystone. 
Digital Zoom  Press the cursor ◄► button to adjust the Digital Zoom menu. 
Reset Press  (Enter) / ► to reset all settings to default values  
(except Language and Security Lock). 
 
– 28 –  
						

							
DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr   –––   UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
Installation II Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installa-
tion II menu. Press the cursor ▲▼ button to move up and down in the Installation II menu.  
 
ITEM DESCRIPTION 
Auto Source Press the cursor ◄► button to enable or disable automatic source detection. 
Auto Power Off 
(min.) Press the cursor ◄► button to enable or disable automatic shutdown of lamp when no signal.  
Auto Power On Press the cursor ◄► button to enable or disable automatic power On when AC power is supplied. 
Fan Speed 
Press the cursor ◄► button to toggle between Normal and High fan speeds.  
Note: We recommend selecting high speed in high temperatures, high humidity, or high  
altitude areas. 
Lamp Mode Press the cursor ◄► button to select the lamp mode for higher brightness or lower brightness 
to save lamp life. 
Advanced Press  (Enter) / ► to enter the Advanced menu. See Advanced Feature on page 30. 
Factory Reset Press  (Enter) / ► to reset all items to factory preset values. 
Status Press  (Enter) / ► to enter the Status menu. See page 39 for more information on Status. 
 
– 29 –  
						

							
DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
Advanced Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Installation II menu. 
Press ▲▼ to move to the Advanced menu and then press Enter or ►. Press ▲▼ to move up and 
down in the Advanced menu. Press ◄► to change values for setting. 
 
ITEM DESCRIPTION 
OSD Menu Setting Press  (Enter) / ► to enter the OSD setting menu. See page 31 for more information on 
OSD Menu Setting. 
Peripheral Test Press  (Enter) / ► to enter the Peripheral Test menu. See page 31 for more information on 
Peripheral Test. 
Lamp Hour Reset After replacing the lamp, this item should be reset. See page 32 for more information on Lamp 
Hour Reset. 
Low Power Mode Press ◄► to turn Low Power Mode on or off. 
RS232 Press ◄► to select RS232 (remote) or Network (LAN) mode depending on projector connec-
tion method. 
Network Press  (Enter) / ► to enter the Network menu. See page 32 for more information on Net-
work settings. 
 
– 30 –  
						

							
DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr   –––   UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
OSD Menu Setting  
 
ITEM DESCRIPTION 
Menu Position Press ◄► button to select different OSD location. 
Translucent Menu Press ◄► button to select OSD background translucent level.  
Menu Display Press ◄► button to select OSD timeout delay. 
Peripheral Test 
 
ITEM DESCRIPTION 
Remote Control Test Press  (Enter) / ► to test the IR remote controller for diagnostic.  
USB Test Press  (Enter) / ► to test the USB connection with connected PC. 
Button Test Press  (Enter) / ► to test the button on keypad. 
Color Test Press  (Enter) / ► to select different colors on screen. 
Sound Test Press  (Enter) / ► to test sound output. 
– 31 –  
						

							
DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
Lamp Hour Reset 
 
Please refer to Resetting the Lamp on page 42 to reset the lamp hour counter. 
Network 
 
ITEM DESCRIPTION 
Network State Displays the network connection status. 
DHCP 
Press ◄► to turn DHCP On or Off.  
Note: If you select DHCP Off, complete the IP Address, Subnet Mask, Gateway, and DNS 
fields. 
IP Address  Enter a valid IP address if DHCP is turned off. 
Subnet Mask Enter a valid Subnet Mask if DHCP is turned off. 
Gateway Enter a valid Gateway address if DHCP is turned off. 
DNS Enter a valid DNS name if DHCP is turned off. 
Apply Press  (Enter) / ► to confirm settings. 
 
– 32 –  
						

							
DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr   –––   UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
The Network function enables remote management and display of projector functions such as Power 
On/Off, Brightness, Contrast, and projector status information over a network (LAN) or from a stand 
alone PC or notebook. 
To connect to a network (LAN), refer to the following steps: 
1. Connect an RJ45 cable to LAN ports on the projector and a router or hub on the network. 
 
2. Press the MENU button to open the OSD menu.  
3. Press the cursor ◄► buttons to navigate to Installation II and select Network. 
4. Select DHCP and press the cursor ◄► buttons to select On if the network has a DHCP 
server or router, 
OR 
If the network uses Static IP addresses, enter IP, Subnet, Gateway (optional), and DNS 
(optional) addresses in the fields provided.  
The projector’s IP address must be in the same IP domain as the network and cannot occupy 
the same IP address as an existing device. For example, if the control PC or notebook re-
sides at 192.168.000.010, the projector’s IP address must be 192.168.000.nnn (where nnn = 
1 to 9 and 11 to 255—10 is occupied by the control PC). 
5. Select Apply and press  (Enter) / ► to confirm settings. 
6. On the control PC, open a web browser and enter the IP address of the projector. 
 
– 33 –  
						

							
DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
The Projector Web Server home page displays. In the example, the projector resides at IP 
address 192.168.0.2. 
 
7. Click Control Panel and make any desired changes to projector settings. 
 
– 34 –