Vivitek D862 Projector User Manual
Have a look at the manual Vivitek D862 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 263 Vivitek manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DLP Projector – User’s Manual – 53 – SIGNAL RESOLUTION H-SYNC (KHZ) V-SYNC (HZ) COMPOSITE / S-VIDEOCOMPONENT RGB DVI/ HDMITM 1600 x 1200 75.0 60.0 － － O O 640 x 480 35.0 66.68 － － O O 832 x 624 49.725 74.55 － － O O 1024 x 768 60.24 75.0 － － O O Apple Mac 1152 x 870 68.68 75.06 － － O O 480i 15.734 60.0 － O － O SDTV 576i 15.625 50.0 － O － O 480p 31.469 60.0 － O － O EDTV 576p 31.25 50.0 － O － O 720p 37.5 50.0 － O － O 720p 45.0 60.0 － O － O 1080i 33.8 60.0 － O － O 1080i 28.1 50.0 － O － O 1080p 67.5 60.0 － O － O HDTV 1080p 56.3 50.0 － O － O O: Frequency supported —: Frequency not supported * : Displayable level
DLP Projector—User’s Manual Projector Dimensions – 54 –
DLP Projector – User’s Manual – 55 – REGULATORY COMPLIANCE FCC Warning This equipment has been tested and found to comply wi th the limits for a Class B digital device pur- suant to Part 15 of the FCC Rules. These lim its are designed to provide reasonable protection against harmful interference when the equipm ent is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, ma y cause harmful interference to radio communica- tions. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. Changes or modifications not expressly approved by the parties responsible for compliance could void the user’s authority to operate the equipment. Canada This class B digital apparatus complies with Canadian ICES-003. Safety Certifications FCC-B, cUL, UL, CE, C-tick, CC C, KC, CB, PCT, NOM, SASO, PSB.
DLP Projector—User’s Manual
– 56 –
APPENDIX I
RS-232C Protocol
RS232 Setting
Baud rate: 9600
Parity
check: None
Data bit:
8
Stop bit: 1
Flow Con-
trol None
Minimum delay for next command:
1ms
Control Command Structure
P1 P2
Pin no. Name Pin no.
1 NC 1
2 RXD 3
3 TXD 2
4 NC 4
5 GND 5
6 NC 6
7 RTS 7
8 CTS 8
9 NC 9
DLP Projector – User’s Manual – 57 – Header code Command code Data code End code HEX Command Data 0Dh ASCII ｀V’ Command Data CR Operation Command Note: XX=00-98, projectors ID, XX=99 is for all projectors Return Result P=Pass / F=Fail n: 0:Disable/1: E nable/Value(0~9999) Command Group 00 ASCII Function Description Return Result VXXS0001 Power On P/F VXXS0002 Power Off P/F VXXS0003 Resync P/F VXXG0004 Get Lamp Hours Pn/F VXXS0005n Set Air filter timer n=0~999999 P/F VXXG0005 Get Air filter timer n=0~999999 Pn/F VXXS0006 System Reset P/F VXXG0007 Get System Status 0: Standby 2:Operation 3:Cooling Pn/F VXXG0008 Get F/W Version Pn/F VXXG0009 Get Alter EMail Pn/F VXXS0009n Set Alter Email [email protected] P/F Command Group 01 ASCII Function Description Return Value VXXG0101 Get Brightness n=0~100 Pn/F VXXS0101n Set Brightness n=0~100 P/F VXXG0102 Get Contrast n=0~100 Pn/F VXXS0102n Set Contrast n=0~100 P/F VXXG0103 Get Color n=0~100 Pn/F VXXS0103n Set Color n=0~100 P/F VXXG0104 Get Tint n=0~100 Pn/F VXXS0104n Set Tint n=0~100 P/F VXXG0105 Get Sharpness 0~31 Pn/F VXXS0105n Set Sharpness 0~31 P/F VXXG0106 Get Color Temperature 0:Cold 1:Normal 2:Warm Pn/F VXXS0106n Set Color Temperature 0:Cold 1:Normal 2:Warm P/F
DLP Projector—User’s Manual – 58 – VXXG0107 Get Gamma 0:PC 1:MAC 2:Video 3:Chart 4: B&W Pn/F VXXS0107n Set Gamma 0:PC 1:MAC 2:Video 3:Chart 4: B&W P/F Command Group 02 ASCII Function Description Return Value VXXS0201 Select RGB P/F VXXS0202 Select RGB2 P/F VXXS0203 Select DVI P/F VXXS0204 Select Video P/F VXXS0205 Select S-Video P/F VXXS0206 Select HDMI P/F VXXS0207 Select BNC P/F VXXS0208 Select Component P/F VXXS0209 Select HDMI 2 P/F VXXG0220 Get Current Source Return 1:RGB 2:RGB2 3:DVI 4:Video 5:S-Video 6:HDMI 7:BNC 8:Component 9:HDMI 2 Pn/F Command Group 03 ASCII Function Description Return Value VXXG0301 Get Scaling 0: Fill 1: 4:3 2: 16:9 3 :Letter Box 4 :Native Pn/F VXXS0301n Set Scaling 0: Fill 1: 4:3 2: 16:9 3 :Letter Box 4 :Native P/F VXXG0302 Blank Pn/F VXXS0302n Blank P/F VXXG0303 Auto Keystone On Pn/F VXXS0303n Auto Keystone On P/F VXXG0304 Freeze On Pn/F VXXS0304n Freeze On P/F
DLP Projector – User’s Manual – 59 – VXXG0305 Volume n=0~8 Pn/F VXXS0305n Volume n=0~8 P/F VXXG0306 Treble n=0~16 Pn/F VXXS0306n Treble n=0~16 P/F VXXG0307 Bass n=0~16 Pn/F VXXS0307n Bass n=0~16 P/F VXXG0308 Projection Mode 0:Front 1:Rear 2:Ceiling 3:Rear+Ceiling Pn/F VXXS0308n Projection Mode 0:Front 1:Rear 2:Ceiling 3:Rear+Ceiling P/F VXXG0309 Set vertical keystone value n= -30~30 Pn/F VXXS0309n Set vertical keystone value n= -30~30 P/F VXXG0310 Set horizontal keystone value n=-20~+20 Pn/F VXXS0310n Set horizontal keystone value n=-20~+20 P/F VXXG0311 Adjust the zoom n=-10~10 Pn/F VXXS0311n Adjust the zoom n=-10~10 P/F VXXG0312 Adjust the focus n=-20~+20 Pn/F VXXS0312n Adjust the focus n=-20~+20 P/F VXXG0313 Adjust the vertical lens shift n=-20~+20 Pn/F VXXS0313n Adjust the vertical lens shift n=-20~+20 P/F VXXG0314 Adjust the horizontal lens shift n=-20~+20 Pn/F VXXS0314n Adjust the horizontal lens shift n=-20~+20 P/F Command Group 04 (Remote Control) ASCII Function Description Return Value VXXS0401 UP arrow P/F VXXS0402 DOWN arrow P/F VXXS0403 LEFT arrow P/F VXXS0404 RIGHT arrow P/F VXXS0405 POWER P/F VXXS0406 EXIT P/F VXXS0407 INPUT P/F VXXS0408 AUTO P/F VXXS0409 KEYSTONE+ P/F VXXS0410 KEYSTONE- P/F VXXS0411 MENU P/F VXXS0412 STATUS P/F VXXS0413 MUTE P/F VXXS0414 ZOOM+ P/F VXXS0415 ZOOM- P/F
DLP Projector—User’s Manual – 60 – VXXS0416 BLANK P/F VXXS0417 FREEZE P/F VXXS0418 VOLUME+ P/F VXXS0419 VOLUME- P/F VXXS0420 Enter P/F