Vivitek D803w 3d Projector User Manual

							 
 
  DLP Projector—User’s Manual 
–
 43  – 
HDMI Q & A 
Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI 
cable? 
Recently, HDMI Licensing, LLC announced that  cables would be tested as Standard or High-
Speed cables.  
․ Standard (or “category 1”) HDMI cables have been tested to perform at speeds of 75Mhz or 
up to 2.25Gbps, which is the equivalent of a 720p/1080i signal.  
․ High Speed (or “category 2”) HDMI cables have been tested to perform at speeds of 
340Mhz or up to 10.2Gbps, which is the highe st bandwidth currently available over an 
HDMI cable and can successfully handle 1080p signals including those at increased color 
depths and/or increased refresh rates from t he Source. High-Speed cables are also able to 
accommodate higher resolution displays, such as WQXGA cinema monitors (resolution of 
2560 x 1600). 
 
Q. How do I run HDMI cables longer than 10 meters? 
There are many HDMI Adopters working on HDMI  solutions that extend a cable’s effective 
distance from the typical 10 meter range to much longer lengths. These companies 
manufacture a variety of solutions that includ e active cables (active electronics built into 
cables that boost and extend the cable’s signal), repeaters, amplifiers as well as CAT5/6 and 
fiber solutions. 
 
Q. How can I tell if a cable is an HDMI certified cable? 
All HDMI products are required to be certified  by the manufacturer as part of the HDMI 
Compliance Test Specification. However, ther e may be instances where cables bearing the 
HDMI logo are available but  have not been properly tested. HDM I Licensing, LLC actively 
investigates these instances to ensure that  the HDMI trademark is properly used in the 
market. We recommend that consumers buy  their cables from a reputable source and a 
company that is trusted. 
 
For more detail information check  http://www.hdmi.org/learningcenter/faq.aspx#49
 
 
  
						

							DLP Projector—User’s Manual 
— 44 — 
SPECIFICATIONS 
Specifications 
Display type  TI DMD 0.65” 
Resolution WXGA 1280x800 
Projection distance  1 ~ 10 m 
Projection screen size 27” ~ 302” 
Projection lens Manual Focus/Manual Zoom 
Zoom ratio 
1.1x 
Vertical keystone correction +/- 40 steps 
Projection methods Front, Rear, Desktop/Ceiling (Rear, Front) 
Data compatibility VGA,
 WXGA, SVGA, XGA, SXGA, WSXGA, UXGA,  WUXGA, Mac 
SDTV/EDTV/ HDTV  480i, 480p, 720p, 1080i, 1080p 
Video compatibility NTSC/NTSC 4.43, PAL (B
/G/H/I/M/N/60), SECAM 
H-Sync  31 – 102 kHz 
V-Sync  23 – 120 Hz 
Safety certification FCC-B, cUL, UL, CE, C-tick, CC
C, KC, CB, PCT, NOM, SASO, PSB 
Operation temperature  5° ~ 35°C 
Dimensions 285 mm (W) x 261 mm (D) x 130 mm (H) 
AC Input AC Universal 100-240, Typical @ 110VAC (100-240)/+-10% 
Power consumption  300W 
Stand By 
						

							 
 
  DLP Projector—User’s Manual 
Projection Distance vs. Projection Size 
 
Projection Distance and Size Table 
IMAGE DIAGONAL 
（INCH）
 
IMAGE WIDTH 
(INCH) 
IMAGE HIGHT 
(INCH) 
PROJECTION 
DISTANCE  
（MM）  
FROM
PROJECTION 
DISTANCE 
 （MM ） 
TO   
OFFSET-A 
( MM ) 
60 50.9 31.8 2481.3 2765.6 113.1 
70 59.4 37.1 2894.9 3226.6 131.9 
72 61.1 38.2 2977.6 3318.8 135.7 
80 67.8 42.4 3308.4 3687.5 150.8 
84 71.2 44.5 3473.8 3871.9 158.3 
90 76.3 47.7 3722.0 4148.4 169.6 
96 81.4 50.9 3970.1 4425.0 180.9 
100 84.8 53.0 4135.5 4609.4 188.5 
120 101.8 63.6 4962.6 5531.3 226.2 
135 114.5 71.5 5582.9 6222.7 254.4 
150 127.2 79.5 6203.3 6914.1 282.7 
200 169.6 106.0 8271.0 9218.8 376.9 
 
– 45  –  
						

							DLP Projector—User’s Manual 
— 46 — 
Timing Mode Table 
SIGNAL RESOLUTION H-SYNC  
(KHZ) 
V-SYNC 
(HZ) 
COMPOSITE 
/ S-VIDEOCOMPONENT RGB DVI/ 
HDMI 
NTSC   － 
15.734 60.0 O － － － 
PAL/SECAM  － 
15.625 50.0 O － － － 
720 x 400  37.9 85.0  － 
－ O O 
640 x 480  31.5 60.0  － 
－ O O 
640 x 480  37.9 72.0  － 
－ O O 
640 x 480  37.5 75.0  － 
－ O O 
640 x 480  43.3 85.0  － 
－ O O 
800 x 600  35.2 56.0  － 
－ O O 
800 x 600  37.9 60.0  － 
－ O O 
800 x 600  48.1 72.0  － 
－ O O 
800 x 600  46.9 75.0  － 
－ O O 
800 x 600  53.7 85.0  － 
－ O O 
1024 x 768  48.4 60.0  － 
－ O O 
1024 x 768  56.5 70.0  － 
－ O O 
1024 x 768  60.0 75.0  － 
－ O O 
1024 x 768  68.7 85.0  － 
－ O O 
1280 x 800  49.7 59.8 － － O O 
1280 x 800 
62.8 74.9 － － O O 
1280 x 800 
71.6 84.8 － － O O 
1280 x 1024 
63.98 60.0 － － O O 
1280 x 1024 
79.98 75.0 － － O O 
1280 x 1024 
91.10 85.0 － － O O 
1280 x 960 
60.0 60.0 － － O O 
1280 x 960 
85.9 85.0 － － O O 
1400 x 1050 
65.3 60.0  － 
－ O O 
1440 x 900  70.6 75.0  － 
－ O O 
VESA 
1440 x 900  55.6 60.0  － 
－ 
O O  
						

							 
 
  DLP Projector—User’s Manual 
–
 47  – 
SIGNAL RESOLUTION H-SYNC  
(KHZ) 
V-SYNC 
(HZ) 
COMPOSITE 
/ S-VIDEOCOMPONENT RGB DVI/ 
HDMI 
1600 x 1200  75.0 60.0  － 
－ O O 
640 x 480  35.0 66.68  － 
－ O O 
832 x 624  49.725 74.55  － 
－ O O 
1024 x 768  60.24 75.0  － 
－ O O 
Apple Mac 
1152 x 870  68.68 75.06  － 
－ O O 
480i 15.734  60.0 － O － O 
SDTV 
576i 15.625  50.0 － 
O － O 
480p 31.469 
60.0 － O － O EDTV 
576p 31.25  50.0 － 
O － O 
720p 37.5 
50.0 － O － O 
720p 45.0 
60.0 － O － O 
1080i 33.8 
60.0 － O － O 
1080i 28.1 
50.0 － O － O 
1080p 67.5 
60.0 － O － O 
HDTV 
1080p 56.3  50.0 － 
O － O 
O: Frequency supported 
—: Frequency not supported 
* : Displayable level  
						

							DLP Projector—User’s Manual 
— 48 — 
Table of Supported Frequency For 2D®3D mode 
The unit automatically determines PC signals to select the appropriate resolution. 
Some signals may require manual adjustment. 
SIGNAL 2D Resolution H-SYNC 
( KHz ) 
V-SYNC 
( Hz ) 
HDMI 
(Digital) 
640 x 480  31.5 60 ○ 
800 x 600 
37.9 60.3  ○ 
1024 x 768 
48.4 60 ○ 
1280 x 720 
45 60  ○ 
1280 x 768 
47.8 60 ○ 
1280 x 800 
49.7 60 ○ 
1280 x 1024 
64 60  ○ 
1400 x 1050 
65.3 60 ○ 
VESA 
1440 x 900  55.9 60 ○ 
480i 15.734 
60 ○ 
SDTV 
576i 15.625  50 ○ 
576p 31.3 
50 ○ 
EDTV 
480p 31.5  60 ○ 
720p 37.5 
50 ○ 
720p 45 
60 ○ 
1080i 33.8 
60 ○ 
1080i 28.1 
50 ○ 
1080p 67.5 
60 ○ 
HDTV 
1080p 56.3  50 ○ 
○ : Supported frequency 
  
						

							 
 
  DLP Projector—User’s Manual 
–
 49  – 
Table of Supported Frequency For 3D®3D mode 
The unit automatically determines PC signals to select the appropriate resolution. 
Some signals may require manual adjustment. 
3D RESOLUTION HDMI 3D FORMAT 
800 x 600 @ 120Hz  ○ 
Frame sequential 
1024 x 768 @ 120Hz  ○ 
Frame sequential 
1280 x 720 @ 120Hz  ○ 
Frame sequential 
HD1080p24FP  ○ 
Frame packing 
SD720p60FP  ○ 
Frame packing 
SD720p50FP  ○ 
Frame packing 
HD1080i50SBSH  ○ 
Side-by-side 
SD720p60SBSH  ○ 
Side-by-side 
SD720p50SBSH  ○ 
Side-by-side 
○ : Supported frequency 
  
						

							DLP Projector—User’s Manual 
Projector Dimensions 
 
 
 
 
TEMPPOWER LAMP
 
—  50 —  
						

							 
 
  DLP Projector—User’s Manual 
–
 51  – 
REGULATORY COMPLIANCE 
FCC Warning 
This equipment has been tested and found to comply wi th the limits for a Class B digital device pur-
suant to Part 15 of the FCC Rules. These lim its are designed to provide reasonable protection 
against harmful interference when the equipm ent is operated in a commercial environment. 
This equipment generates, uses, and  can radiate radio frequency energy and, if not installed and 
used in accordance with the instruction manual, ma y cause harmful interference to radio communica-
tions. Operation of this equipment  in a residential area is likely to cause harmful interference in which 
case the user will be required to correct  the interference at his/her own expense. 
Changes or modifications not expressly approved  by the parties responsible for compliance could 
void the user’s authority to operate the equipment. 
Canada 
This class B digital apparatus complies with Canadian ICES-003. 
Safety Certifications 
FCC-B, cUL, UL, CE, C-tick, CC C, KC, CB, PCT, NOM, SASO, PSB.