Home > Vivitek > Projector > Vivitek D7180hd User Manual

Vivitek D7180hd User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Vivitek D7180hd User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 263 Vivitek manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							DLP Projector – User’s Manual 
     
     
    Menu Settings 
    Press the ENTER  button to enter the  Menu Settings sub menu. 
     
    ITEM DESCRIPTION 
    Menu Position  Press the 
    ◄► buttons to select from five OSD locations:  
    Top-Left/ Top-Right/  Center/ Bottom-Left/ Bottom-Right. 
    Menu Display Time  Press the 
    ◄► buttons to set the Menu Display timer before the OSD times out. 
    (Range: 5sec/ 10sec/  15sec/ 20sec/ 25sec/ 30sec) 
     
    Source 
    Press the ENTER  button to enter the  Source sub menu. 
     
    ITEM DESCRIPTION 
    PC Press  the ◄►  buttons to enable or disable the PC source. 
    DVI  Press the 
    ◄► buttons to enable or disable the DVI source. 
    HDMI Press  the ◄►  buttons to enable or disable the HDMI source. 
    Quick Auto Search  Press the 
    ◄► buttons to enable or disable Quick Auto Search for available input source. 
    Notes: When the desired source is selected, the Qu ick Auto Search function will be turn off. 
    — 22 —  
    						
    							DLP Projector – User’s Manual 
     
     
    Command Control Settings 
    Press the ENTER  button to enter the  Command Control Settings  sub menu. 
     
    ITEM DESCRIPTION 
    Control By Press the ◄► buttons to select projector remote command control. (Range:  RS232/ RJ45) 
    Network State  Press the 
    ENTER button to enter the  Network State sub menu.  
    See  Network State  on page 23. 
    Projector ID  Press the cursor ◄►
     button to set Projector ID number for projector control by RS232 com-
    mand. 
     
    Network State 
     
    ITEM DESCRIPTION 
    Network State  Displays the network connection status. 
    DHCP  Press 
    ◄► to turn DHCP On or Off.  
    Note:  If you select DHCP Off, complete the IP  Address, Subnet Mask, Gateway, and DNS 
    fields. 
    Projector IP Address   Enter a valid IP address if DHCP is turned off. 
    Subnet Mask  Enter a valid Subnet Mask if DHCP is turned off. 
    Default Gateway Displays the default Gateway address on the network. 
    DNS Enter a valid DNS name if DHCP is turned off. 
    Apply Press  (Enter) / ► to confirm settings. 
    – 23  –  
    						
    							DLP Projector – User’s Manual 
     
     
    For simplicity and ease of operatio n, the projector provides diverse networking and remote manage-
    ment features. 
    The LAN/RJ45 function of  the projector through a network, such  as remotely manage: Power On/Off, 
    Brightness and Contrast settings. Also, projector st atus information, such as: Video-Source, Sound-
    Mute, etc. 
     
    1.  Connect an RJ45 cable to RJ45 ports  on the projector and the PC (Laptop). 
     
    2.  On the PC (Laptop), select  Start ´ Control  Panel  ´ Network  Connections . 
     
    — 24 —  
    						
    							DLP Projector – User’s Manual 
     
     
    3. Right-click on  Local Area Connection, and select  Properties. 
     
    4. In the  Properties  window, select the  General tab, and select  Internet Protocol (TCP/IP) . 
    5. Click  Properties . 
     
    – 25  –  
    						
    							DLP Projector – User’s Manual 
     
     
    6. Click  Use the following IP address  and fill in the IP address and Subnet mask, then click  OK. 
     
    7. Press the  Menu button on the projector. 
    8. Select  OSD ´ SETUP>>Basic Menu  →Command Control Settings →Network State. 
    9. After getting into  Network, input the following: 
    `  DHCP: Off 
    `  IP Address: 10. 10. 10. 10 
    `  Subnet Mask: 255.255.255.0 
    `  Gateway: 0.0.0.0 
    `  DNS Server: 0.0.0.0 
    10. Press 
     (Enter) /  ► to confirm settings. 
    11.  Open a web browser (for example, Microsoft Internet  Explorer with Adobe Flash Player 9.0 or higher). 
     
    12. In the Address bar, input the IP address: 10. 10. 10. 10. 
    — 26 —  
    						
    							DLP Projector – User’s Manual 
     
     
    13. Press  (Enter) /  ►. 
    The projector is setup for remote managemen t. The LAN/RJ45 function displays as follows. 
     
    Based on network web-page for the input-string in  tools tab, the limitation for Input-Length is 
    in the below list (“space” and t he other punctuation key included): 
    CATEGORY ITEM INPUT-LENGTH 
    IP Address 15 
    IP ID 3 Crestron Control 
    Port 5 
    Projector Name 10 
    Location 9 Projector 
    Assigned To 8 
    DHCP (Enabled) (N/A) 
    IP Address 15 
    Subnet Mask 15 
    Default Gateway 15 
    Network Configuration 
    DNS Server 15 
    Enabled (N/A) 
    New Password 15 User Password 
    Confirm 15 
    Enabled (N/A) 
    New Password 15 Admin Password 
    Confirm 15 
     
    –  27  –  
    						
    							DLP Projector – User’s Manual 
     
     
     
    For more information, please visit  http://www.crestron.com/. 
    — 28 —  
    						
    							DLP Projector – User’s Manual 
     
     
    RS232 by Telnet Function 
    Besides projector connected to  RS232 interface with “Hyper-Ter minal” communication by dedicated 
    RS232 command control, there is alternative RS232 command control way, so called “RS232 by 
    TELNET” for LAN/RJ45 interface. 
    Quick Start-Guide for “RS232 by TELNET” 
    Check and get the IP-Address on OSD of the projector. 
    Make sure that laptop/PC can acce ss the web-page of the projector. 
    Make sure that “Windows Firewall” setting to be disabl ed in case of “TELNET” function filtering out by 
    laptop/PC. 
     
    Start => All Programs => Accessories => Command Prompt 
     
     
     
    –  29  –  
    						
    							DLP Projector – User’s Manual 
     
     
    Input the command format like the below: 
    telnet  ttt.xxx.yyy.zzz  23  (“Enter” key pressed) 
    ( ttt.xxx.yyy.zzz : IP-Address of the projector) 
    If Telnet-Connection ready, and user  can have RS232 command input, then “Enter” key pressed, the 
    RS232 command will be workable. 
     
    How to have TELNET enable d in Windows VISTA / 7 
    By default installation for Windows VISTA, “TELNET”  function is not included. But end-user can have 
    it by way of “Turn Windows feat ures On or Off” to be enabled. 
    Open “Control Panel” in Windows VISTA 
     
    Open “Programs” 
     
    —  30 —  
    						
    							DLP Projector – User’s Manual 
     
     
     
    Select “Turn Windows features on or off” to open 
     
    Have “Telnet Client” option che cked, then press “OK” button. 
     
    – 31  –  
    						
    All Vivitek manuals Comments (0)

    Related Manuals for Vivitek D7180hd User Manual