Vivitek D7180hd User Manual

							DLP Projector – User’s Manual 
 
 
—  12 — 
ON-SCREEN DISPLAY (OSD) MENU SETTINGS 
OSD Menu Controls 
The projector has an OSD that lets you ma ke image adjustments and change various settings.  
Navigating the OSD 
You can use the remote control curs or buttons or the buttons on the top of the projector to navigate 
and make changes to the OSD. The following illu stration shows the corresponding buttons on the 
projector. 
 
1.  To enter the OSD, press the  MENU but-
ton.  
2.  There are six menus. Press the cursor  ◄►  button to move through the menus. 
3. Press the cursor  ▲▼ button to move up 
and down in a menu.  
4. Press  ◄► to change values for settings.
5. Press  MENU to close the OSD or leave a 
sub menu. 
Note: 
Depending on the video source, not all items in  the OSD are available. For example, the PC Detail 
Adjustment item in the Display menu can only be m odified when connected to a PC. Items that 
are not available cannot be accessed and are grayed out.   
						

							DLP Projector – User’s Manual 
 
 
Setting the OSD Language 
Set the OSD language to your pr eference before continuing. 
1. Press the MENU button. Press the cursor  ◄► button to navigate to  SETUP>>Basic. 
 
2. Press the cursor ▲▼  button until Language is highlighted.  
3. Press the cursor ◄►  button until the language you want is selected.  
4. Press the MENU button to close the OSD.   
– 13  –  
						

							DLP Projector – User’s Manual 
 
 
OSD Menu Overview 
Use the following illustration to quickly find a se tting or determine the range for a setting. 
SharpnessTintColorContrastBrightnessPICTURE>> Basic
Flesh Tone
PICTURE>> AdvancedColor TemperatureGamma
Color Space
Lamp Native/Warm/Normal/Cool/Cooler/High Cool
Auto/RGB/STDV/HDTV
DISPLAYAspect RatioKeystoneOverscanPC Detail AdjustmentAuto/Frequency/Phase/Horizontal Position/Vertical Position
Auto/16:9/4:3/Letter Box/Real
Background ColorSleep TimerAuto Power OffBlank TimerProjectionSplash Logo
SETUP >> BasicLanguage
Menu Settings
Source
Vivitek/Blue/BlackFront Table/Front Ceiling/Rear Table/Rear CeilingDisable / 5 Min / 10 Min / 15 Min / 20 Min / 25 Min / 30 MinDisable / 5 Min / 10 Min / 15 Min / 20 Min / 25 Min / 30 MinDisable / 30 Min / 1 Hr / 2 Hr / 3 Hr / 4Hr / 8Hr / 12 HrPurple/Black/BlueMenu position
PCcheck/uncheck
Top-Left/Top-Right/Center/Bottom-Left/Bottom-Right
DVIcheck/uncheckHDMIcheck/uncheckQuick Auto SearchOnOff
HSG Adjustment
HueSturationGain
Reset Picture SettingEnterYes/No
English/ Danish/ Dutch/ Finnish/ Français/ Deutsch/ Italiano/ Korean/ Norsk/ Polish/ Português (Latin 
American)/ Russian/ Simplified Chinese/ Traditional Chinese/ Spanish/ Swedish/ Czech/  Greek/ Turkish/ 
Hungarian/ Vietnamese/ Arabic/ Thai
Zoom Out/H Offset/V Offset/RestSize & Position Adjustment
5 Sec / 10 Sec / 15 Sec / 20 Sec / 25 Sec / 30 SecMenu Display Time
RS232/RJ45(RS232)Network StateNetwork StateControl ByCommand Control Settings
LED Control
Closed CaptionTest Pattern
HDMI
LampLamp Mode
HDMI Format
Off/ Blank/  Solid Field/ Hori Ramp/ Vert Ramp/ Hori Lines/ Diagnoal / Vert Lines/Grid /CheckBoard /Ansi /Red /Green /Blue /Whi teClosed Caption Enable
Off/ Normal
Off
TrebleBass
AGCOn /OffYes/NoReset
Yes/NoReset Lamp Timer
High Altitude ModeYes/NoOff/ On
Caption VersionCC1/CC2/CC3/CC4
Boost/Standard
Lamp Hour
HDMI Amplifier GainAuto/PC Signal/Video Signal
STATUSSourceResolutionLamp HourFirmware Version
Presentation TimerTimerTimer PeriodOn/Off
Timer ResetENTER
Reset / CancelEnterReset All
MuteOn /Off
Movie/Bright/Normal/User 1/User 2/User 3
PICTURE>> Advanced|HSG 
AdjustmentPrimary ColorR/G/B/Y/C/M
VolumeAudioSETUP >> Advanced
White BalanceRed Gain/Green Gain/Blue Gain/Red Bias/Green Bias/Blue BiasUser Color TempWhite Gain Red/White Gain Green/White Gain Blue
DHCP(On/Off)Projector IP AddressSubnet MaskDefault GatewayDNSApply
Display Mode
Noise Reduction
Low Power ModeOff/ On
Projector ID
 
—  14 —  
						

							DLP Projector – User’s Manual 
 
 
PICTURE>>Basic Menu 
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the 
PICTURE>>Basic  menu. Press the cursor  ▲▼ button to move up and down in the 
PICTURE>>Basic  menu. Press ◄► to change values for settings. 
Note: 
Customizing the settings in  PICTURE>>Basic menu is only available in User 1/ 2/ 3 mode. 
 
ITEM DESCRIPTION 
Display Mode  Press the cursor ◄►
 buttons to set the Display Mode.  
(Range: Movie/ Bright/ Normal/ User 1/ User 2/ User 3) 
Brightness  Press the cursor ◄► buttons to adjust the display brightness. 
Contrast  Press the cursor ◄► buttons to adjust the display contrast. 
Color  Press the cursor ◄►
 buttons to adjust the video saturation. 
Notes: This function is only available when SOG/YUV from VGA or HDMI mode from 
HDMI input source is selected and Display  Mode set to User 1/ User 2/ User 3. 
Tint Press the cursor ◄►
 buttons to adjust the video tint/hue. 
Notes: This function is only available when SOG/YUV from VGA or HDMI mode from  HDMI input source is selected and Display  Mode set to User 1/ User 2/ User 3. 
Sharpness Press the cursor ◄►
 buttons to adjust the display sharpness. 
Notes: This function is only available when SOG/YUV from VGA or HDMI mode from 
HDMI input source is selected and Display  Mode set to User 1/ User 2/ User 3. 
Flesh Tone Press the cursor ◄►
 buttons to adjust the display flesh tone. 
Notes: This function is only available when SOG/YUV from VGA or HDMI mode from  HDMI input source is selected and Display  Mode set to User 1/ User 2/ User 3. 
Reset Picture Settings Press the ENTER button to reset all settings to default values. 
– 15  –  
						

							DLP Projector – User’s Manual 
 
 
PICTURE>>Advanced Menu 
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the  
PICTURE>>Advanced  menu. Press the cursor  ▲▼ button to move up and down in the  
PICTURE>>Advanced  menu. Press ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Noise Reduction  Press the cursor ◄► button to adjust the Noise Reduction.  
Color Temperature  Press the cursor ◄► button to set the Color Temperature. 
Gamma  Press the cursor ◄►
 button to adjust the gamma correction of the display. 
Notes: This function is only available in User 1/ 2/ 3 mode. 
HSG Adjustment  Press the 
ENTER button to enter the  HSG Adjustment sub menu.  
See  HSG Adjustment  on page 17. 
Color Space  Press the cursor ◄►
 button to set the Color Space. 
(Range:  Auto/ RGB/ SDTV/ HDTV) 
Notes: This function is only available when HDMI input source is selected. 
White Balance  Press the 
ENTER button to enter the  White Balance sub menu.  
See  White Balance  on page  17 
User Color Temp  Press the 
ENTER button to enter the  User Color Temp sub menu.  
See  User Color Temp  on page 18 
— 16 —  
						

							DLP Projector – User’s Manual 
 
 
HSG Adjustment 
Press the ENTER  button to enter the  HSG Adjustment sub menu.  
 
ITEM DESCRIPTION 
Primary Color  Press the 
◄► buttons to set the Primary Color. 
Notes: There are six sets ( R/ G/ B/ C/ M/ Y) of colors to be customized. 
Hue Press  the ◄►  buttons to adjust the Hue. 
Saturation Press  the ◄►  buttons to adjust the Saturation. 
Gain Press  the ◄►  buttons to adjust the Gain. 
White Balance 
Press the ENTER  button to enter the  White Balance sub menu.  
 
ITEM DESCRIPTION 
Red Gain  Press the ◄► buttons to adjust the Red Gain. 
Green Gain  Press the ◄► buttons to adjust the Green Gain. 
Blue Gain  Press the ◄► buttons to adjust the Blue Gain.  
Red Bias  Press the ◄► buttons to adjust the Red Bias. 
Green Bias  Press the ◄► buttons to adjust the Green Bias. 
Blue Bias  Press the ◄► buttons to adjust the Blue Bias. 
– 17  –  
						

							DLP Projector – User’s Manual 
 
 
User Color Temp 
Press the ENTER  button to enter the  User Color Temp sub menu.  
 
ITEM DESCRIPTION 
White Gain Red  Press the ◄► buttons to adjust the White Gain Red. 
White Gain Green  Press the ◄► buttons to adjust the White Gain Green. 
White Gain Blue  Press the ◄► buttons to adjust the White Gain Blue. 
 
—  18 —  
						

							DLP Projector – User’s Manual 
 
 
DISPLAY Menu  
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the 
DISPLAY  menu. Press the cursor  ▲▼ button to move up and down in the  DISPLAY menu.  
Press  ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Aspect Ratio  Press the cursor ◄►
 button to set the Aspect Ratio. 
(Range:  Auto/ 16:9/ 4:3/ Letter Box/ Real) 
Keystone  Press the cursor ◄► button to adjust the Keystone. 
Overscan  Press the cursor ◄► button to adjust the Overscan. 
PC Detail Adjustment  Press the 
ENTER button to enter the  PC Detail Adjustment  sub menu.  
See  PC Detail Adjustment  on page 20. 
Size & Position Adjust-
ment  Press the 
ENTER button to enter the  Size & Position Adjustment  sub menu.  
See  Size & Position Adjustment  on page 20. 
– 19  –  
						

							DLP Projector – User’s Manual 
 
 
PC Detail Adjustment 
Press the ENTER  button to enter the  PC Detail Adjustment  sub menu. 
Note: 
Customizing the settings in  PC Detail Adjustment menu is only available when PC input source 
(analog RGB) is selected. 
 
ITEM DESCRIPTION 
Auto Press the 
ENTER/AUTO  button on the control panel or the  ENTER/AUTO button on the 
remote control to automatically adjust frequency, phase, and position. 
Frequency Press  the ◄►  buttons to adjust the A/D sampling number. 
Phase Press  the ◄►  buttons to adjust the A/D sampling clock. 
Horizontal Position  Press the ◄► buttons to adjust the display position right or left.  
Vertical Position  Press the ◄► buttons to adjust the display position up or down. 
Size & Position Adjustment 
Press the ENTER  button to enter the  Size & Position Adjustment  sub menu.  
 
ITEM DESCRIPTION 
Zoom Out Press the ◄► buttons to adjust the Zoom Out factor. 
H Offset  Press the ◄► buttons to adjust the horizontal image shift. 
V Offset  Press the ◄► buttons to adjust the vertical image shift.  
Reset Press  the ENTER  button to reset  Size & Position Adjustment  settings to default values. 
— 20 —  
						

							DLP Projector – User’s Manual 
 
 
  SETUP>>Basic Menu  
Press the MENU  button to open the  OSD menu. Press the cursor  ◄► button to move to the 
SETUP>>Basic  menu. Press the cursor  ▲▼ button to move up and down in the  
SETUP>>Basic  menu. Press ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Language  Press the cursor ◄►
 buttons to select a different localization menu. 
(Range: English/ Danish/ Dutch/ Finnish/ Français/ Deutsch/ Italiano/ Korean/ Norsk/ Polish/ 
Português (Latin American)/ Russian/ Simplified Chinese/ Traditional Chinese/ Spanish/ 
Swedish/ Czech/  Greek/ Turkish/  Hungarian/ Vietnamese/ Arabic/ Thai) 
Splash Logo Press the cursor ◄►
 buttons to select a different startup screen. 
(Range:  Vivitek/ Blue/ Black) 
Projection  Press the cursor ◄►
 buttons to choose from four projection methods:  
Front Table/ Front Ceiling/  Rear Table/ Rear Ceiling. 
Blank Timer   Press the cursor ◄►
 buttons to set the Blank Screen timer. The projected image is automati-
cally restored after the set time. 
(Range:  Disable/ 5 min/ 10 min/ 15 min/ 20 min/ 25 min/ 30 min) 
Auto Power Off  Press the cursor ◄►
 buttons to set the Auto Power Off timer. The projector automatically 
turns off if no input source is detect ed after the preset period of time. 
(Range:  Disable/ 5 min/ 10 min/ 15 min/ 20 min/ 25 min/ 30 min) 
Sleep Timer  Press the cursor ◄►
 buttons to set Sleep timer. The projector automatically turns off after the 
preset period of time.  
(Range:  Disable/ 30 min/ 1hr/ 2hr/ 3hr/ 4hr/ 8hr/ 12hr) 
Background Color   Press the cursor ◄►
 buttons to select the background color when no input source is detected. 
(Range:  Purple/ Black/ Blue) 
Menu Settings  Press the ENTER button to enter the  Menu Settings sub menu. See Menu Settings  on page 22.
Source Press  the ENTER  button to enter the  Source sub menu. See Source  on page 22. 
Command Control 
Settings  Press the 
ENTER button to enter the  Command Control Settings  sub menu.  
See  Command Control Settings  on page 23. 
– 21  –