Vivitek D5380u User Manual

							DLP Projector—User’s Manual 
3. Right-click on Local Area Connection , and select Properties. 
 
4. In the  Properties  window, select the  General tab, and select  Internet Protocol (TCP/IP) . 
5. Click  Properties . 
 
6. Click  Use the following IP address  and fill in the IP address and Subnet mask, then click  OK. 
 
— 42 —  
						

							D
D
D L
L
L P
P
P  
 
  P
P
P r
r
r o
o
o j
j
j e
e
e c
c
c t
t
t o
o
o r
r
r —
—
— U
U
U s
s
s e
e
e r
r
r ’
’
’ s
s
s  
 
  M
M
M a
a
a n
n
n u
u
u a
a
a l
l
l  
 
 
7. Press the  Menu button on the projector. 
8. Select  Settings2→ Advanced1  → Network 
9.  After getting into  Network, input the following: 
`  DHCP: Off 
`  IP Address: 10.10.10.10 
`  Subnet Mask: 255.255.255.0 
`  Gateway: 0.0.0.0 
`  DNS Server: 0.0.0.0 
10. Press 
 (Enter) / ►  to confirm settings. 
Open a web browser  
(for example, Microsoft Internet Explorer  with Adobe Flash Player 9.0 or higher). 
 
11.  In the Address bar, input  the IP address: 10.10.10.10. 
12. Press 
 (Enter) / ► . 
The projector is setup for remote managemen t. The LAN/RJ45 function displays as follows. 
 
–  43  –  
						

							DLP Projector—User’s Manual 
 
 
CATEGORY ITEM INPUT-LENGTH 
IP Address 15 
IP ID 3 Crestron Control 
Port 5 
Projector Name 10 
Location 10 Projector 
Assigned To 10 
DHCP (Enabled) (N/A) 
IP Address  15 
Subnet Mask 15 
Default Gateway 15 
Network Configuration 
DNS Server 15 
Enabled (N/A) 
New Password  10 User Password 
Confirm 10 
Enabled (N/A) 
New Password 10 Admin Password 
Confirm 10 
For more information, please visit  http://www.crestron.com. 
— 44 —  
						

							D
D
D L
L
L P
P
P  
 
  P
P
P r
r
r o
o
o j
j
j e
e
e c
c
c t
t
t o
o
o r
r
r —
—
— U
U
U s
s
s e
e
e r
r
r ’
’
’ s
s
s  
 
  M
M
M a
a
a n
n
n u
u
u a
a
a l
l
l  
 
 
Preparing Email Alerts  
1.  Make sure that user can access the hom epage of LAN RJ45 function by web browser (for ex-
ample, Microsoft Internet Explorer v6.01/v8.0).  
2.  From the Homepage of LAN/RJ45, click  Alert Settings.  
 
3.  By default, these input boxes in  Alert Settings are blank.  
 
– 45  –  
						

							DLP Projector—User’s Manual 
4. For Sending alert mail, input the following: 
The 
　 SMTP  field is the mail server for sending out em ail (SMTP protocol). This is a required 
field. 
The 
　 To field is the recipient’s email address (for ex ample, the projector administrator). This is 
a required field.  
The 
　 Cc field sends a carbon copy of the alert to  the specified email address. This is an 
optional field (for example, the proj ector administrator’s assistant).  
The 
　 From field is the sender’s email address (for exampl e, the projector administrator). This is 
a required field.  
Select th
　 e alert conditions by che cking the desired boxes.  
 
Note: Fill in all fields as specified. User can click Send Test Mail  to test what setting is correct. 
For successful sending an e-mail alert, you must se lect alert conditions and enter a correct e-mail 
address. 
 
 
—  46 —  
						

							D
D
D L
L
L P
P
P  
 
  P
P
P r
r
r o
o
o j
j
j e
e
e c
c
c t
t
t o
o
o r
r
r —
—
— U
U
U s
s
s e
e
e r
r
r ’
’
’ s
s
s  
 
  M
M
M a
a
a n
n
n u
u
u a
a
a l
l
l  
 
 
RS232 by Telnet Function 
Besides projector connected to  RS232 interface with “Hyper-Terminal” communication by 
dedicated RS232 command control, there is alte rnative RS232 command control way, so called 
“RS232 by TELNET” for  LAN/RJ45 interface. 
Quick Start-Guide for “RS232 by TELNET” 
Check and get the IP-Address on OSD of the projector. 
Make sure that laptop/PC can acce ss the web-page of the projector. 
Make sure that “Windows Firewall” setting to be di sabled in case of “TELNET” function filtering 
out by laptop/PC. 
 
Start => All Programs => Accessories => Command Prompt 
 
–  47  –  
						

							DLP Projector—User’s Manual 
Input the command format like the below: 
telnet  ttt.xxx.yyy.zzz  23 (“Enter” key pressed) 
( ttt.xxx.yyy.zzz : IP-Address of the projector) 
If Telnet-Connection ready, and user can have RS232 command input, then “Enter” key 
pressed, the RS232 co mmand will be workable. 
 
How to have TELNET enabled in Windows VISTA / 7 
By default installation for Windows VISTA, “TEL NET” function is not included. But end-user 
can have it by way of “Turn Windows f eatures On or Off” to be enabled. 
Open “Control Panel” in Windows VISTA 
 
Open “Programs”  
 
—  48 —  
						

							D
D
D L
L
L P
P
P  
 
  P
P
P r
r
r o
o
o j
j
j e
e
e c
c
c t
t
t o
o
o r
r
r —
—
— U
U
U s
s
s e
e
e r
r
r ’
’
’ s
s
s  
 
  M
M
M a
a
a n
n
n u
u
u a
a
a l
l
l  
 
 
Select “Turn Windows features on or off” to open 
 
Have “Telnet Client” option che cked, then press “OK” button. 
 
Specsheet for “RS232 by TELNET” : 
1. Telnet: TCP 
2. Telnet port: 23  
(for more detail, kindly please get contact with the service agent or team) 
3.  Telnet utility: Windows “T ELNET.exe” (console mode) 
4.  Disconnection for RS232-by-Telnet control normally: Close Wi ndows Telnet utility directly 
after TELNET connection ready 
5.  Limitation 1 for Telnet-Control: there is le ss than 50 bytes for successive network payload 
for Telnet-Control application. 
Limitation 2 for Telnet-Control: there is  less than 26 bytes for one complete RS232 
command for Telnet-Control. 
Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be more 
than 200 (ms). 
(*, In Windows XP built-in “TELNET.exe” utilit y, “Enter” key pressed will have “Carriage-
Return” and “New-Line” code.) 
 
–  49  –  
						

							DLP Projector—User’s Manual 
Advanced 2 Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 2 menu. 
Press  ▲▼ to move to the  Advanced 2 menu and then press  Enter or ►. Press  ▲▼ to move up 
and down in the Advanced 2  menu. Press ◄► to
 enter and change values for setting. 
 
ITEM DESCRIPTION 
Sleep Timer (min)  Press the cursor 
◄► button to enter and set Sleep timer. The projector automatically 
turns off after the preset period of time. 
Source Filter  Press  (Enter) / 
► to enter the Source Filter menu. See page  51 for more 
information on Source Filter . 
—  50 —  
						

							D
D
D L
L
L P
P
P  
 
  P
P
P r
r
r o
o
o j
j
j e
e
e c
c
c t
t
t o
o
o r
r
r —
—
— U
U
U s
s
s e
e
e r
r
r ’
’
’ s
s
s  
 
  M
M
M a
a
a n
n
n u
u
u a
a
a l
l
l  
 
 
Source Filter 
Press the ENTER  button to enter the  Source Filter sub menu. 
 
ITEM DESCRIPTION 
DVI Press  the ◄►  buttons to enter and enable or disable the DVI source. 
HDMI Press  the ◄►  buttons to enter and enable  or disable the HDMI source. 
DisplayPort Press the  ◄► buttons to enter and enable or disable the DisplayPort source. 
VGA1 Press  the ◄►  buttons to enter and enable or disable the VGA1 source. 
VGA2 Press  the ◄►  buttons to enter and enable or disable the VGA2 source. 
BNC Press  the ◄►  buttons to enter and enable or disable the BNC source. 
Component Video  Press the ◄► buttons to enter and enable or disable the Component Video source. 
S-Video Press  the ◄►  buttons to enter and enable or disable the S-Video source. 
Composite Video  Press the ◄► buttons to enter and enable or disable the Composite Video source. 
 
– 51  –