Vivitek D5180hd Projector User Manual

							DLP Projector—User’s Manual 
Basic Setup  
Press the MENU button to open the  OSD menu. Press the cursor ▲▼button to move to the  Basic 
Setup  menu. Press  ENTER / ►  button to move up and down in the  Basic Setup item. Press ENTER 
/ ►  button to entry item. Press ▲▼to change values for settings. 
 
ITEM DESCRIPTION 
Language  Press the cursor▲▼button to select a different localization Menu. 
Auto Scan  Press the cursor▲▼
button to enable or disable the automatically searching of all in-
put port to find out the valid source. 
Menu Setting  Press the 
ENTER/ ►  button to enter the  Menu Setting sub menu.  
See  Menu Setting  on page  33. 
Splash Logo  Press the cursor▲▼button to set desired startup screen when lamp warming up. 
Background Color  Press the cursor▲▼button to set desired background color when in no signal. 
Lamp Setting  Press the 
ENTER/ ►  button to enter the  Lamp sub menu. 
See  Lamp Setting  on page  33 . 
 
— 32 —  
						

							 P
P
P r
r
r e
e
e f
f
f a
a
a c
c
c e
e
e  
 
 
Menu Setting 
 
ITEM DESCRIPTION 
Menu Position  Press the cursor▲▼button to select a different OSD location. 
Menu Display Time  Press the cursor▲▼button to select OSD timeout delay. 
Transparency Menu  Press the cursor ◄► button to select OSD transparency  
Lamp Setting 
 
ITEM DESCRIPTION 
Lamp Mode Press the cursor
▲▼button to select the lamp mode for higher brightness or lower 
brightness to save lamp life. 
Reset Lamp Timer  Press the▲▼button to reset the Lamp Hour after the lamp is replaced 
– 33  –  
						

							DLP Projector—User’s Manual 
Advanced Setup 
Press the Menu button to open the OSD menu. Press  ▲▼ to move to the  Advanced Setup  menu 
Press  ENTER  / ►  button to move up and down in the  Advanced Setup item. Press ENTER  / ►  but-
ton to entry item. Press  ▲▼to change values for setting. 
 
ITEM DESCRIPTION 
High Altitude Mode  Press the cursor 
▲▼ buttons to turn on or off High Altitude Mode . 
Recommend to turn ON  when the altitude of the environment is higher than 1500m 
(4921ft). 
Network Settings  Press 
ENTER  / ►  to enter the Network menu. See page  35 for more information on 
Network Settings . 
Reset All  Press the ▲▼ button to enter reset all settings. 
 
— 34 —  
						

							 P
P
P r
r
r e
e
e f
f
f a
a
a c
c
c e
e
e  
 
 
Network Settings 
 
ITEM DESCRIPTION 
Control By  Press the
▲▼buttons to select projector remote command control.  
Selecting RJ45 enables RJ45 control and disables the RS232 port.  
Selecting RS232 enables RS232 control and disables the RJ45 network port.  
When RS232 control is enabled, the serial port settings are fixed to: 
115200 Baud;8-bits;No parity;1 Stop-bit;No flow control  
(Range:  RS232/ RJ45) 
Note:  this setting changes the standby power: 
RS232 = 
						

							DLP Projector—User’s Manual 
 
Network Status 
 
ITEM DESCRIPTION 
Network Status Displays the network connection status. 
DHCP  Press
▲▼to turn DHCP On or Off.  
Note:  If user selects ‘DHCP’ Off, it will still use user apply IP setting or default RJ45 
IP setting. If user selects ‘DHCP’ On, it will use dynamic IP address and IP setting 
from DHCP server on the network.. 
IP Address   Press the▲▼buttons to change value IP address if DHCP is turned off. 
Subnet Mask  Press the▲▼buttons to change value Subnet Mask if DHCP is turned off. 
Gateway Press  the▲▼ buttons to change value Gateway  address if DHCP is turned off. 
DNS Press the▲▼ buttons to change value DNS name if DHCP is turned off. 
Apply Press ▲▼ to confirm settings. 
 
 
 
 
 
 
 
 
 
 
 
— 36 —  
						

							 P
P
P r
r
r e
e
e f
f
f a
a
a c
c
c e
e
e  
 
 
For simplicity and ease of operation, the projector provides diverse networking and remote management 
features. 
The LAN/RJ45 function of the pr ojector through a network, such as remotely manage: Power On/Off, 
Brightness and Contrast settings. Also, projector stat us information, such as: Video-Source, Sound-Mute, 
etc
. 
 
LAN_RJ45 
1.  Connect an RJ45 cable to RJ45 ports on the projector and the PC (Laptop). 
 
2.  On the PC (Laptop), select  Start → Control  Panel →  Network Connections . 
 
– 37  –  
						

							DLP Projector—User’s Manual 
3. Right-click on Local Area Connection , and select Properties. 
 
4. In the  Properties  window, select the  General tab, and select  Internet Protocol (TCP/IP) . 
5. Click  Properties . 
 
6. Click  Use the following IP address  and fill in the IP address and Subnet mask, then click  OK. 
 
— 38 —  
						

							 P
P
P r
r
r e
e
e f
f
f a
a
a c
c
c e
e
e  
 
 
7. Press the  Menu button on the projector. 
8. Select  Advanced Setup  → Network Settings  → Control By → RJ45 option. 
9.  After getting into  Network Status, input the following: 
`  DHCP: Off 
`  IP Address: 10.10.10.10 
`  Subnet Mask: 255.255.255.0 
`  Gateway: 0.0.0.0 
`  DNS Server: 0.0.0.0 
10. Press 
 (Enter) / ►  to confirm settings. 
Open a web browser  
(for example, Microsoft Internet Explorer  with Adobe Flash Player 9.0 or higher). 
 
11.  In the Address bar, input  the IP address: 10.10.10.10. 
12. Press 
 (Enter) / ► . 
The projector is setup for remote managemen t. The LAN/RJ45 function displays as follows. 
 
–  39  –  
						

							DLP Projector—User’s Manual 
 
CATEGORY ITEM INPUT-LENGTH 
IP Address 14 
IP ID 3 Crestron Control 
Port 5 
Projector Name 10 
Location 10 Projector 
Assigned To 10 
DHCP (Enabled) (N/A) 
IP Address  15 
Subnet Mask 15 
Default Gateway 15 
Network Configuration 
DNS Server 15 
Enabled (N/A) 
New Password  15 User Password 
Confirm 15 
Enabled (N/A) 
New Password 15 Admin Password 
Confirm 15 
 
For more information, please visit  http://www.crestron.com. 
 
 
 
 
 
 
 
 
 
 
—  40 —  
						

							 P
P
P r
r
r e
e
e f
f
f a
a
a c
c
c e
e
e  
 
 
Information Menu 
Press the MENU  button to open the  OSD menu. Press the cursor ▲▼button to move to the  
Information Menu ..
 
 
ITEM DESCRIPTION 
Source  Displays the activated input source. 
Resolution Displays the nativ e resolution of input source. 
Lamp Hour Displays the number of hours the lamp has been in use. 
Firmware Version  Displays the firmware version of the projector. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
– 41  –