Vivitar Vivicam X024v2 Users Manual

							Downloaded from www.Manualslib.com manuals search engine  30 
1) Press the MENU (M) button to open the menus for the current mode. 
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Setup 
menu. 
3) Press the UP or DOWN direction control buttons to scroll to the Quality 
submenu.  
4) Press the MENU (M) button to select the Quality submenu and open the 
submenu options. 
5) Press the UP or DOWN direction control buttons to scroll through the submenu 
options.  
6) Press the MENU (M) button to select and save the desired option, exit the menu 
screen and return to your previous mode. 
7) An icon reflecting your selection will display on the LCD screen.  
8) Remember that this setting will be saved by your camera until you manually 
change the setting or restore the camera‟s default factory settings. 
 
 
Date  
When you capture an image with your camera, the image will include a time stamp 
with the date and time that the image was taken. 
The Date menu allows you to set your camera‟s date and time as desired. You can 
also disable the timestamp for future images that will be taken with your camera. 
The Date options include 
On – The time/date stamp appears on photos taken 
Off – The time/date stamp does not appear on photos taken 
Set Date – Allows you to set the time and date 
 
 
   
						

							Downloaded from www.Manualslib.com manuals search engine  31 
To Enable/Disable the Time/Date stamp:  
1) Press the MENU (M) button to open the menus for the current mode. 
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Setup 
menu. 
3) Press the UP or DOWN direction control buttons to scroll to the Date submenu.  
4) Press the MENU (M) button to select the Date submenu and open the submenu 
options. 
5) Press the UP or DOWN direction control buttons to scroll through the submenu 
options.  
6) Press the MENU (M) button to select and save the desired option (On or Off), 
exit the menu screen and return to your previous mode. 
7) Remember that this setting will be saved by your camera until you manually 
change the setting or restore the camera‟s default factory settings. 
 
To Set the Date and Time: 
1) Press the MENU (M) button to open the menus for the current mode. 
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Setup 
menu. 
3) Press the UP or DOWN direction control buttons to scroll to the Date submenu.  
4) Press the MENU (M) button to select the Date submenu and open the submenu 
options. 
5) Press the UP or DOWN direction control buttons to scroll through the submenu 
options.  
6) Press the MENU (M) button to select „Set Date‟ and open the Date and Time 
settings window.  
7) Press the LEFT or RIGHT direction control buttons to scroll and select each 
item. 
8) Press the UP or DOWN direction control buttons to change and set the selected 
item (Year, Month, Day, Hour, Minute, Second, Date Format Type).   
						

							Downloaded from www.Manualslib.com manuals search engine  32 
9) When the date and time have been set, press the MENU (M) button to save the 
settings, exit the menu screen and return to the previous mode. 
10) Remember that this setting will be saved by your camera until you manually 
change the setting or restore the camera‟s default factory settings.  
 
 
Auto Power Off Menu  
You can use the Auto Power Off feature in order to conserve you camera‟s battery 
life. The designated time represents when your camera will automatically power off.  
When the camera sits idle for the designated period of time, the camera will shut off 
completely and will need to be powered on again with the power button before the 
next use. 
The Auto Power Off options include: 
60 seconds, 120 seconds, 180 seconds, None 
 
1) Press the MENU (M) button to open the menus for the current mode. 
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Setup 
menu. 
3) Press the UP or DOWN direction control buttons to scroll to the Auto Power Off 
submenu.  
4) Press the MENU (M) button to select the Auto Power Off submenu and open the 
submenu options. 
5) Press the UP or DOWN direction control buttons to scroll through the submenu 
options.  
6) Press the MENU (M) button to select and save the desired option, exit the menu 
screen and return to your previous mode. 
7) Remember that this setting will be saved by your camera until you manually 
change the setting or restore the camera‟s default factory settings.   
						

							Downloaded from www.Manualslib.com manuals search engine  33 
Language Menu  
You can select your camera‟s language setting by selecting the desired language 
from the Language menu. 
The Language options include: 
English, French, Spanish, Portuguese, German, Dutch, Italian, Russian, Turkish 
 
1) Press the MENU (M) button to open the menus for the current mode. 
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Setup 
menu. 
3) Press the UP or DOWN direction control buttons to scroll to the Language 
submenu.  
4) Press the MENU (M) button to select the Language submenu and open the 
submenu options. 
5) Press the UP or DOWN direction control buttons to scroll through the submenu 
options.  
6) Press the MENU (M) button to select and save the desired option, exit the menu 
screen and return to your previous mode. 
7) Remember that this setting will be saved by your camera until you manually 
change the setting or restore the camera‟s default factory settings. 
 
 
Frequency Menu 
The options in the Frequency menu represent the frequency of the electrical current 
in fluorescent lighting sources in your locale. If your camera is set to a frequency that 
does not match your country‟s electric current, you may see waves on the images 
taken by your camera. 
The Frequency options include: 
50Hz – UK, Europe and Australia 
60Hz – US, Canada and South America   
						

							Downloaded from www.Manualslib.com manuals search engine  34 
1) Press the MENU (M) button to open the menus for the current mode. 
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Setup 
menu. 
3) Press the UP or DOWN direction control buttons to scroll to the Frequency 
submenu.  
4) Press the MENU (M) button to select the Frequency submenu and open the 
submenu options. 
5) Press the UP or DOWN direction control buttons to scroll through the submenu 
options.  
6) Press the MENU (M) button to select and save the desired option, exit the menu 
screen and return to your previous mode. 
7) Remember that this setting will be saved by your camera until you manually 
change the setting or restore the camera‟s default factory settings. 
 
 
Format Menu (Format Memory Card)  
You can use the Format Memory Card menu to delete all of the content that is 
currently on your camera‟s memory card.  
Keep in mind that formatting the memory card will permanently delete all of 
the content on your camera‟s memory card.  
This option will delete all of the content at one time. If you would like to delete 
individual images, use the delete menu in the camera‟s Playback mode. 
Format options include: 
OK, Cancel 
 
1) Press the MENU (M) button to open the menus for the current mode. 
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Setup 
menu.   
						

							Downloaded from www.Manualslib.com manuals search engine  35 
3) Press the UP or DOWN direction control buttons to scroll to the Format 
submenu.  
4) Press the MENU (M) button to select the Format submenu and open the 
submenu options. 
5) Press the UP or DOWN direction control buttons to scroll through the submenu 
options. 
a. Press „OK‟ to proceed with the Format.  
A format confirmation message appears. Press the LEFT or RIGHT direction 
control buttons to select „Yes‟ to format the SD card or „No‟ to exit and return 
to the previous mode. 
Press the MENU (M) button to confirm the desired option. 
b. Select „Cancel‟ and then press the MENU (M) button to exit the format and 
return to the previous mode. 
 
 
Default Setting Menu (Factory Default Settings)   
Use this menu to reset your camera settings to the original Factory Default Settings. 
The Default Setting options include: 
Ok, Cancel 
 
1) Press the MENU (M) button to open the menus for the current mode. 
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Setup 
menu. 
3) Press the UP or DOWN direction control buttons to scroll to the Default Setting 
submenu.  
4) Press the MENU (M) button to select the Default Setting submenu and open the 
submenu options. 
5) Press the UP or DOWN direction control buttons to scroll through the submenu   
						

							Downloaded from www.Manualslib.com manuals search engine  36 
options. 
a. Press „OK‟ to proceed with the resetting to the Default settings.  
A Default Setting confirmation message appears. Press the LEFT or RIGHT 
direction control buttons to select „Yes‟ to begin the reset to the default 
settings „No‟ to exit and return to the previous mode. 
Press the MENU (M) button to confirm the desired option. 
b. Select „Cancel‟ and then press the MENU (M) button to exit the Default 
Settings screen and return to your previous mode. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
						

							Downloaded from www.Manualslib.com manuals search engine  37 
Photo Playback Mode 
The Playback Mode allows you to review and edit photos and videos that you‟ve already 
taken with you camera.  
When you first turn on the camera, the camera is in Photo Capture mode by default. To 
access the Playback Mode: 
 Press the MODE button twice to open the Playback Mode.  
 The latest captured file appears on the LCD screen. If there are no images stored, a 
message (No File) appears.  
 For photos, the  icon appears on the top left of the LCD screen. 
 
 
Viewing Photos on Your Camera 
1) Select your Photo: 
 Once in Playback mode, press LEFT or RIGHT direction buttons to scroll 
through the images on your digital camera‟s memory card until you find the 
image you would like to view. 
 Each captured image (videos and photos) is displayed on the LCD screen.  
 Photos appear with an arrow icon on the top left of the LCD screen.  
 
2) Zooming In/Out of your selected Photo: 
 Press the T / Zoom In button to Zoom In and magnify the selected photo.  
Use the UP / DOWN / LEFT / RIGHT direction buttons to navigate around the 
photo. 
Note: Press the MENU (M) button to return to viewing the photo without 
magnification. 
 Press the W/Zoom Out button to Zoom Out of the selected photo. 
Use the UP / DOWN / LEFT / RIGHT direction buttons to navigate around the 
photo. 
   
						

							Downloaded from www.Manualslib.com manuals search engine  38 
Thumbnail View 
Easily navigate and select the image you wish to view by using the Thumbnail View. 
The images on your camera will be displayed in a 3 X 3 matrix where you can use the 
direction buttons to scroll and select images from the thumbnails. 
1) Press the W/Zoom Out button. 
2) All the images on your camera will appear in the Thumbnail View. 
3) Use the UP / DOWN / LEFT / RIGHT direction buttons to scroll and select the 
image you wish to view. 
4) Press the MENU (M) button to enlarge the selected image full size. 
 
 
Photo Playback Mode Quick Function Buttons 
Your digital camera has a four-directional pad that functions as Quick Function buttons.  
 
Quick Function 
Button 
Function 
Left Displays the PREVIOUS image. 
Right Displays the NEXT image. 
 
 
Other 
 
W/Zoom Out 
Opens Thumbnail View 
 To navigate in the Thumbnail View, press the 
UP/DOWN/LEFT/RIGHT direction buttons. 
 To select a JPEG from the Thumbnail View, press the 
MENU (M) button. 
MENU (M) 
 Opens the menu options for Photo Playback Mode 
Note: To navigate through the Menus, use the 
LEFT/UP/RIGHT/DOWN directions control buttons. 
 Saves your selected Menu option. 
   
						

							Downloaded from www.Manualslib.com manuals search engine  39 
Photo Playback Mode Menus 
The following are the menus that appear in your camera‟s Photo Playback Mode: 
Rotate, Protect (Lock/Unlock), Delete, Crop Image, Pictbridge 
 
Rotate Menu  
Use this menu to rotate the pictures that you‟ve taken with your camera. 
The Rotate options include: 
90, 180, 270, Cancel 
 
1) Press the MENU (M) button to open the menus for the current mode. 
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Rotate 
menu. 
3) Press the UP or DOWN direction control buttons to scroll through the menu 
options.  
4) Press the MENU (M) button to select and save the desired option, exit the menu 
screen and return to your previous mode. 
5) The selected picture will now appear rotated in the Playback mode. 
 
 
Protect Menu  
Pictures and Videos taken with your camera can be protected or “locked” to prevent any 
deletion or alteration being made to the files.  
The Protect options include: 
Lock, Unlock 
 
1) Press the MENU (M) button to open the menus for the current mode. 
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Protect 
menu. 
3) Press the UP or DOWN direction control buttons to scroll through the menu 
options.