Vivitar Vivicam 7690 Users Manual

							 30 
         3. Press the Up/Down button to select the resolution option you desire.                 VGA (640x480) / QVGA (320x240)  4. Press the Menu/OK button to confirm. 5. The corresponding resolution icon will appear on the right hand side of the LCD screen.        
Playback Mode 
Set the mode switch to the Playback mode. You can preview the photos and videos you have recorded. In Playback mode you can rotate, protect, delete and crop your photos and you can protect and delete video clips. You can also print photos directly from your camera using PictBridge technology.  NOTE: The message, “No Image” will appear on the LCD screen if there are no photos/videos in the camera.     
						

							 31 
 
Thumbnail and Zoom       You can view the images on your camera as thumbnails. You can also press the T and W buttons to zoom in and out of your photos:  1. Pressing the W button once will open the thumbnail display view.  
                  2. Press the Right/Left button to move between the images. 3. Press the T button to view the image in full screen.  4. To Zoom in to the photo press the T button to magnify the photos and the W button to zoom out. 5. Press the Up/Down/Right/Left button to navigate within the selected photo.   
                
						

							 32 
Note:   1. You cannot zoom in to AVI files. 
2. If you select an AVI file, an  icon will appear on the LCD 
3. If you select a JPEG file, an  icon will appear on the LCD screen.   
Playing the AVI video file      Select an AVI file you want to play.  1. Press the Shutter button to begin playing the AVI file.  
 2. Press the Shutter button to pause and again to continue. 3. Press the Up  button  to stop  and exit the video playback mode  for selecting files  or  wait  until  the file playback over.  Note: For  how  to  protect or delete video please  refer  to the  relevant  section  in  the Edit photos and videos section below.      
						

							 33 
Edit photos and videos      Select  a  still  photo  you  want  to  rotate,  protect, delete, crop  or  print. Select  a  video  you  want  to protect or delete.   
Rotate  1. Press the Menu/OK button. 2. Press the Right/Left button to select the Rotate menu option.  
           3. Press the Up/Down button to select the degree you want to rotate your photo or cancel to exit. 4. Press the Menu/OK button to confirm. 5. A “Rotate and Saving” message will appear on the LCD. After a few seconds the photo will appear rotated as per your choice.  
Protect      You can protect your photos and videos from accidental deletion.   1. Press the Menu/OK button. 2. Press the Right/Left button to select the Protect menu option.  
						

							 34 
           3. Press the Up/Down button to select the “Lock” option. 4. Press the Menu/OK button to confirm and exit.  5. A lock icon  will appear on that image when it appear on the LCD. 6. To unlock a locked image, press the Menu/OK button. 7. At step 3 select “Unlock” and press Menu/OK to unlock the current file.  
           
Delete Delete unwanted photos and videos at any time to free up memory. You can delete one image or video clip at a time or delete all the unprotected photos and videos that are currently recorded on the memory card at once. Remember to download images frequently to the computer.  1. Press the Menu/OK button. 2. Press the Left/Right button to select the Delete menu option.  
						

							 35 
                                        3. Press the Up/Down button to select:   “This  image”  (photos)  or  “This  Video”  (videos) depending on the file  selected  to  delete  the current photo or video   “ALL” to delete all unprotect photos or videos   “Cancel” to exit.  4. Press the Menu/OK button. 5. The Delete confirmation message will appear to confirm the deletion. 6. Press the Right/Left button to select “Yes” or “No” if you delete one or all photos and videos. 7. Press the Menu/OK button to confirm and exit.   
Crop Image Crop  your  photos  to  show  only  a  specific  portion  of  an  image  or  to  highlight  certain  focal  points. The  Crop  feature  lets  you  zoom  in  on  an  image  and  then  save  that  part  of  the  image  as  a  new photo. The crop feature will only work if a SD card is inserted.  1. Press the Menu/OK button. 2. Press the Left/Right button to select the Crop menu option.  
						

							 36 
           3. Press the Up/Down button to select Crop or cancel. 4. Press the Menu/OK button. 5. The Crop feature opens.  
           6. Press the T/W buttons to out change the size of the rectangle (the area you will crop). 7. Press the Up/Down/Right/Left  button  to move  the  rectangle  to select the area of  the  photo you want to crop. 8. Press the Shutter button. 9. Press the Shutter button again to Save.   Note:    At step 6&7, you can press the Menu/OK button to exit without cropping.      
						

							 37 
Print      You can print photos directly from the camera using the Pictbridge technology on your printer.  1. Select a photo you want to print. 2. Press the Menu/OK button. 3. Press the Left/Right button to select the Pictbridge menu option. 4. Press the Up/Down button to select Pictbridge.  
           5. Press the Menu/OK button to confirm.  6. A “Please connect to device” message will appear on the LCD. 7. Connect your camera to a compatible printer with the USB cable. 8. The following menu will appear:  
           9. Press the Up/Down button to select the “This Image” option and press the Menu/OK button. 10. Select the “Select Image” option to select more than one photo for printing.  
						

							 38 
11. Select “OK” and press the Menu/OK button to start printing. 
           10. Wait for the printer to process your request. After a moment the photo is printed.  Note:  Printing  many  photos will  take more time.  Please  be  patient  and  wait  for  all  the  photos  to print.  11. When  the  print  is  finished,  a  Print  Finished screen  appears. Press  the  Menu/OK  button to close and revert back to the Playback menu mode.    
                      
						

							 39 
Install the Vivitar Experience Image Manager Software  Warning: Do not plug your camera into the computer until the software installation is complete You must be connected to the internet to install and run the Vivitar Experience Image Manager software. 1. Insert the installation CD into your CD-ROM drive. The installation screen should automatically open.                    2. On PC: The Vivitar Experience Image Manager Installer window appears. If the window does not appear, open the application‟s CD/DVD drive and click on “Setup.bat” to launch the installer. 3. On Macintosh: Click the icon to install the Vivitar Experience Image Manager. 4. If you do not have internet access at the time of inserting the CD-ROM, connect to the internet and then click the “Install Vivitar Experience Image Manager” button to begin the installation