Vivitar Vivicam 5019 Users Manual

							Downloaded from www.Manualslib.com manuals search engine  20 
2) Press the Up/Down button to select the RESOLUTION option. 
3) Press the Menu/OK button again. 
4) Press the Up/Down button to select either: 
640 VGA (Higher resolution)  
320 QVGA (Lower resolution) 
5) Press the Menu/OK button to confirm. 
 
Note:  
 By default the video resolution is the higher 640 VGA. 
 The higher the resolution, the better quality will be of the video taken. Recording time for 
higher resolutions is less than for lower resolution. 
 
 
Language 
You can select your camera‟s language setting by selecting the desired language from the 
Language menu. 
1) Press the Menu/OK button. 
2) Press the Up/Down button and select the LANGUAGE option. 
3) Press the Menu/OK button. 
4) Use the Up/Down button to select either: 
English, French, Portuguese or Spanish 
5) Press the Menu/OK button to confirm and save your choice.  
The camera menus and interface now appear in the language that you have selected. 
 
 
 
 
 
 
   
						

							Downloaded from www.Manualslib.com manuals search engine  21 
Playback Mode  
The Playback Mode allows you to review and edit photos and videos that you‟ve already taken 
with you camera. 
 When you first turn on the camera, the camera will be in Photo Capture mode by default.  
 Press the MODE button twice to open the Playback Mode.  
 The latest captured image appears on the LCD screen. 
If there are no images stored, a message (No File) appears. 
 
Viewing Photos on Your Camera 
1) Selecting your Photo: 
 Once in Playback Mode, press the Right/Left button to scroll through the images on your 
camera‟s memory card until you find the image you would like to view. 
 Each captured image (video and photo) is displayed on the LCD screen.  
 Photos appear with a „JPG‟ icon on the top left of the LCD screen.  
 The resolution icon of the photo appears on the bottom left corner of the LCD. 
2) Zooming In/Out of your selected Photo: 
 Press the T / Zoom In button to Zoom In and magnify the selected photo.  
Use the UP / DOWN / LEFT / RIGHT direction buttons to navigate around the photo. 
 Press the W/Zoom Out button to Zoom Out of the selected photo. 
Use the UP / DOWN / LEFT / RIGHT direction buttons to navigate around the photo. 
 
 
Playing Videos on Your Camera 
1) Selecting your Video: 
 Once in Playback mode, press the Right/Left button to scroll through the images on your 
camera‟s memory card until you find the video you would like to view. 
 Each captured image (video and photo) is displayed on the LCD screen.  
 Videos appear with an „AVI‟ icon on the top left of the LCD screen.  
2) Playing your selected video: 
 Press the Shutter button to START playing the video. 
 Press the Shutter button again to STOP the video playback. 
   
						

							Downloaded from www.Manualslib.com manuals search engine  22 
Deleting Images (Photos and Videos) 
You may delete images directly from the memory card on your camera.  
The images can only be deleted while in the Playback mode. 
 
1) In Playback mode, press the Menu/OK button. 
2) Press the Up/Down button to select one of the following options: 
Delete One: in order to delete the current image selected. 
Delete All: to delete all the files in your camera. 
3) Press the Menu/OK button to confirm. 
4) Depending on the Delete option selected, press the Up/Down button to select either “Yes” 
or “No”. 
5) Press the Menu/OK button again to reconfirm your choice. If you choose “Yes” the current 
file is permanently deleted. This action is irreversible. 
 
 
Printing Your Photos 
Your camera supports the PictBridge printing function that allows you to print photos any time 
directly from your camera to the compatible printer.  
1) Select a photo you want to print out by pressing Right/Left button. 
2) Press the Menu/OK button. 
3) Press the Up/Down button to select PRINTER. 
4) Press the Menu/OK button. 
5) Press the Up/Down button to select “Yes”. 
6) Press the Menu/OK button again.  
A “Please connect DSC to printer” message appears on the LCD. 
7) Now you can connect your camera to the PictBridge compatible printer for printing. 
8) Press the Shutter button to start printing the selected photo. 
 
 
 
 
   
						

							Downloaded from www.Manualslib.com manuals search engine  23 
Formatting  
You can use the Format menu to delete all of the content that is currently on your camera‟s 
memory or SD Memory Card.  
Keep in mind that formatting the memory card will permanently delete all of the content on 
your camera’s memory – internal or SD Memory Card.  
This option will delete all of the content at one time. If you would like to delete individual images, 
use the delete menu in the camera‟s Playback mode. 
In the Playback mode: 
1) Press the Menu/OK button. 
2) Press the Up/Down button to select the FORMAT option. 
3) Press the Menu/OK button. 
4) Press the Up/Down button to select either “Yes” or “No”. 
5) Press the Menu/OK button again to confirm your selection. 
6) A “Format OK” message will appear on the LCD once the format has completed. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
						

							Downloaded from www.Manualslib.com manuals search engine  24 
Installing the Software 
You must be connected to the Internet to install and run the “Vivitar® Experience™ Image 
Manager” Software. 
1) Insert the installation CD into your CD-ROM drive. The installation screen should 
automatically open.  
  
2) On PC: The “Vivitar® Experience™ Image Manager Installer” window appears. If the 
window does not appear, open the application‟s CD/DVD drive and click on “Setup.exe” to 
launch the installer. 
On Macintosh: Click the icon that appears on the desktop to install the “Vivitar® 
Experience™ Image Manager”. 
NOTE: If you do not have Adobe® Flash® installed, then the “Adobe® Flash® Player 
Installer” window appears. Press “Continue” and then “Install” to begin the Adobe® Flash® 
installation. Press “Close” to complete the Adobe® Flash® installation and to continue with 
the “Vivitar® Experience™ Image Manager” installation. 
3) If you do not have Internet access at the time of inserting the CD-ROM, connect to the 
Internet and then click the “Install Vivitar® Experience™ Image Manager” button to begin 
the installation. 
   
						

							Downloaded from www.Manualslib.com manuals search engine  25 
NOTE: If you do not have Internet access, you can still download media from the camera. 
Click the “How to transfer photos and videos from my camera to my computer” button for 
instructions. 
4) If you have Internet access, the “Choose your language” window opens, choose your 
language and click “Next” to open the next window. 
5) Select your camera model from the list and click “Next” to open the next window. 
6) Click “Next” to confirm your camera model selection and to install the application. 
7) Please wait while the application is being installed on your computer. 
8) Please review the license terms. 
On PC: Click the “I accept the terms of this license agreement” and then click “Next” to 
continue. 
On the Macintosh: Press “Continue” once the „Welcome‟ screen appears, review the 
Software License Agreement, press “Continue” and then “Agree”. 
9) On PC only: Let the “Vivitar® Experience™ Image Manager” installer create the folder to 
where the program will be installed, and then click “Install”. 
On the Macintosh: Press “Install”. 
10) Please wait while the application continues the installation process on your computer. 
11) On PC and Macintosh: Click the “Close” button after the “Vivitar® Experience™ Image 
Manager” has been successfully installed.  
Click the “Launch”/“Launch Vivitar® Experience™ Image Manager” to open the application. 
12) If you close the application you can run the “Vivitar® Experience™ Image Manager” from 
the Programs (PC) or Applications (MAC) menu on your computer.  
 
 
 
 
 
   
						

							Downloaded from www.Manualslib.com manuals search engine  26 
Connecting the Camera to the Computer 
1) Use the supplied USB cable to connect your camera to your computer. 
2) Power the camera on. 
3) The first time you connect the device to the computer you will have to wait a few seconds 
until the computer recognizes the device. 
 
Getting Photos and Videos from your Camera to Your Computer 
Make sure your SD card with our captured images is inserted. Do not disconnect the cable during 
transfer. Doing so will cancel the transfer of any files on their way to your computer. 
1) Select the “Get Images” button from the Main menu. 
 
2) The “Get media from device” window opens. 
3) You can select to download photos, videos or both. 
4) Select your camera (removable disk) from the device window. If your camera is the only 
USB device connected then it will be selected automatically. 
5) Select a location on the computer where to place the new photo and video files.   
						

							Downloaded from www.Manualslib.com manuals search engine  27 
6) Add the new photo and video files to albums if desired. 
7) Select to remove the media files from the selected device (removable disk) after the import. 
8) Click the “Get Media” button to transfer the photos and videos from your camera to your 
computer. 
9) A media download progress bar appears on the bottom left showing the number of media 
files downloading to your computer. A message appears when the download is complete. 
10) The photo and video files that you have selected are now downloaded to your computer to 
the specified folder and albums ready for your use.            
 
 
 
Get Started! 
Using the “Vivitar® Experience™ Image Manager” you can: 
 Upload and manage photos and videos to and from the most popular photo sharing and social 
networking sites - Facebook, Flickr, Picasa, MySpace, Photobucket, Twitpic, Twitgoo and 
YouTube  
 Seamlessly transfer photos and videos from one social network to another 
 Organize your images by creating offline and online albums  
 Edit images using automatic and manual tools  
 Use automatic “Geotagging” with built in Google Maps 
 
For more details on how to use the “Vivitar® Experience™ Image Manager”, open the Help 
file or click the “Take a Tour” button on the application’s Home page. 
 
 
 
 
 
   
						

							Downloaded from www.Manualslib.com manuals search engine  28 
Transferring Images from my Camera to my Computer Manually 
 
Transferring Photos and Videos: WINDOWS 
1) Use the supplied USB cable to connect your camera to your computer. 
2) „MSDC‟ appears on the LCD – indicating that your camera is now connected to the 
computer as a Mass Storage Device. 
3) A window appears with a list of options, select “Open folder to view files” and click „OK‟. 
4) Open the DCIM folder and the folder inside to view the media files. 
5) Select the media and copy the files from this folder into your computer. Alternatively, select 
the files and choose „Copy‟ from the Edit menu. Then select a folder and choose „Paste‟ 
from the Edit menu.  
6) We recommend that you copy the images into the Pictures/My Pictures folder and the 
videos into the Videos/My Videos folder. 
7) Do not disconnect the USB cable during transfer. Doing so will cancel the transfer of any 
files on their way to your computer. 
 
Transferring Photos and Videos: MACINTOSH 
1) Use the supplied USB cable to connect your camera to your computer. 
2) „MSDC‟ appears on the LCD – indicating that your camera is now connected to the 
computer as a Mass Storage Device. 
3) The camera‟s device icon appears on the desktop. 
4) Click on the device icon and open the DCIM folder and the folder inside to view the media 
files. 
5) Select the files and drag them into your computer. Alternatively, select the files and choose 
„Copy‟ from the Finder‟s Edit menu. Then select a folder and choose „Paste‟ from the Edit 
menu. 
6) We recommend that you copy the images into the Pictures folder and the videos into the 
Movies folder. 
7) Do not disconnect the USB cable during transfer. Doing so will cancel the transfer of any 
files on their way to your computer. 
 
   
						

							Downloaded from www.Manualslib.com manuals search engine  29 
Transferring Photos and Videos:    Apple iPad 
NOTE: Please check your device packaging for compatibility with the iPad. 
 
Apple iPad Camera Connection: 
For models that are compatible with the iPad, photos and videos can be imported from your 
digital camera to your iPad by following either one of the options below: 
1) Connecting your digital camera to your iPad using an iPad Camera Connector: 
Plug the Camera Connector into the dock connector port on your iPad, and then attach your 
digital camera using a USB cable (included) to the Camera Connector. 
NOTE: The iPad Camera Connector is not included. This item may be purchased separately. 
2) Using an iPad SD Card Reader: 
Connect the SD Card Reader to your iPad, then insert your digital cameras SD Memory card 
into the slot to import photos and videos directly from your cameras SD card. 
NOTE: The iPad SD Card Reader is not included. This item may be purchased separately. 
 
After you make the connection, your iPad automatically opens the „Photos‟ application. This 
allows you to choose which photos and videos to import and to organize them into albums. 
 
 
 
Camera Maintenance 
The digital camera is a delicate device. Please handle your camera with care to avoid damaging it. 
Do not expose your camera to heat sources. 
Do not use you camera in wet or moist conditions.