Vivitar Vivicam 50 Quickstart Guide

							n Shooting 
¬ If you want to leave  Self-timer capita  function just 
press  Mode  select to  4.4 Continuous Capture  n Press  Mode  select to (The camera will  
automatically switch to CIF mode) n  Press   Shutter  continuously to take pictures 
 n             Picture counter will continuously accumulate. n STOP : When your finger leave   Shutter   button or           memory full. 
 4.5 Delete Pictures  1. Delete all pictures n Press  Mode  select to  n Press  Shutter  until you hear 2 beeps n              The camera will delete all pictures and 
             the picture counter will refresh to  0  2. Delete last picture n Press  Mode  select to   
						

							n Press  Shutter  until you hear 2 beeps   n               The camera will delete last picture and 
              the picture counter will show result. 4.6 Selecting the image resolution n  : 640 x 480 pixels (default setting)  n   : 320 x 240 pixels 4.7 Selecting a shooting environment  n           : Outdoor mode (default setting, normally use                    this mode.)  n           : Indoor mode ( Optional use this setting for                taking picture indoor ) 
u Important Note: 
If the environment is too dark or the lens cover is not 
open, the camera will stop shooting function and will 
sound 3 beeps when you press  Shutter  button.    
						

							5. Installing Vivicam Driver and Utility Software 5.1 Computer System Requirements 
Please check your PC system requirements before  
installing the software : 
1. Windows 98, ME, 2000, XP 
2. Pentium or higher CPU  
3. CD-ROM drive 
4. Mouse 
5. USB port 
 5.2 Installation of Vivicam TWAIN Driver and AVI Maker     for Windows 2000 / ME / 98    1. Turn on your computer    2. lnsert the camera software CD into the CD-ROM drive  
As shown 
Click the lnstall Vivicam TWAIN Driver  
            
						

							 3. To select the language by popping up the source list as    
follows.   
Click  OK  to next setup procedure. 4. Your computer will display as follows     
Click  Next  and follow setup procedure.  
						

							 5. The TWAIN driver and AVI Maker installation complete.   
Click  Finish  to finish installation. 5.3 Installation of Vivicam TWAIN Driver and AVI     Maker for Windows XP Please follow the steps to     install the drivers for Windows XP  1.Insert the CD installation disk into your CD-ROM drive.   (In case, you already plug-in digital camera to PC first,    please refer SUPPLEMET at below.) 2.The Digital Camera Window Install Shell appears. Click   Install Vivicam Twain Driver on the Software Installer    dialogue box. (or double click the CD drive icon in My    Computer and run InstallMgr.exe in the root directory of    the CD)  
 
 
 
 
  
						

							  3. Follow the onscreen instructions to complete the install-   action and it will finish installing all the necessary files on    your computer. 4. Please plug-in your Digital Camera with USB cable. 5. System will detect Digital Camera. 6. When the Found New Hardware Wizard window appears.   Please select Install from a list or specific location         [ Advanced], and click Next to continue.    
						

							 7. When the following window appears.  
Please select Search removable media [floppy 
CD-ROM...] , and click Next to continue.    8. System copies files and the following screen appears:   
						

							 9. Click Finish to continue the installation.  
   10. Then the Found New Hardware Wizard window appears    again.  
Please select Install from a list or specific location     [Advanced], and click Next to continue.       
						

							 11. When the following window appears.     Please select Search removable media [floppy, CD- 
ROM...] , and click Next to continue. 
  
 12. System copies files and the following screen appears:    
						

							 13. Click Finish to complete the installation  
 5.4 lnstalling Other Utility Software    1. lnsert the camera software CD into the CD-ROM drive 
2. As shown   
Click the utility software you want to install.