Vivitar Vivicam 50 Quickstart Guide

                  - Quickstart 
Vivicam 50
  

 
1. Camera Precautions .....................................................2 
2. Vivicam Introduction ................................................... 3 
3. Meet The Vivicam ........................................................ 5 
4. Ready To Take Pictures ...............................................9 
5. Installing Vivicam Driver and Utility Software..........12 
6. Transferring Pictures To Your Computer ................20 
7. Using The Vivicam as a PC Camera .........................24 
8....

1.Camera Precautions Follow these guidelines when using your Vivicam: n Keep the camera from the following environments 
- High temperature places such as direct sunlight spot,  
  heater, closed vehicle or other hot sources. 
- Excessive humidity and dusty places. 
- Shaking place. n Do not use the camera outdoors if it is raining or snowing. n If the lens or the viewfinder gets dirty, please clean them 
by lens brush or soft cloth. Never touch the lens with the  
fingers. n Do not open the camera case...

2.Vivicam lntroduction 2.1 Specification       n Resolution choices :    Digital Camera mode : 640 x 480 pixels (VGA)                        320 x 240 pixels (CIF) 
PC Camera mode : 640 x 480 pixels                      320 x 240 pixels                      160 x 120 pixels n Focus : Standard mode : 0.9m to infinity from camera            Macro mode : 25cm ~ 30cm n 24 bit full collor n Memory : Built-in 8MB SDRAM n File Format : BMP n Flash Light : none n Self-timer : 10 seconds n Power : AAA alkaline...

 2.2 Accessories 1. Camera Cradle  2. Two AAA alkaline battery 3. Camera hand strap 4. Camera driver and utility software CD 5. USB cable 6. Camera pouch  7. Quickstart Guide       

3.Meet The Vivicam 3.1 General Guide 
 
 
 
 
 Front Back        

 3.2  LCD Panel lndicator  
 
n Picture Counter 
n     : Total number of pictures you have captured 
n   : Memory full          lmage Resolution 
n    : 640 x 480 pixels (default setting) 
n    : 320 x 240 pixels  
Shooting Environmentt 
n   : Outdoor (default setting) 
n   : Indoor 2 3 1  

Continuous Capture 
 
n  : Continuous capture mode 
Picture Delete 
 
n   : Delete all pictures              
 
n          : Delete last picture 
 
  Self-timer mode 
n      : Self-timer mode 
Low Battery warning 
              : When this icon appears with blinking and   
            long beeps. It indicates the low battery 
power. 
 
? lmportant Note: 
The camera will stop shooting function. Please 
replace the two batteries in four hours and be  
sure to download the pictures before replacing...

 3.3 Camera Function Selection  n Press  Mode  button to select the function you need. 
The function icon on LCD panel will blink then press   
  Shutter   button until you hear 2 beeps to  
 n Function Mode Status     

4.Ready To Taking Pictures 4.1 Turn Power On  n Power on : Press   Mode   button and camera will beep. n Power off : Press   Mode   button until camera sound               2 beeps (The camera will be automatically turn           off power if inactive for about 60 seconds ) 4.2 Taking Pictures n Select focus mode 
: Standard mode (0.9m ~ infinity) 
 Normally use this mode. 
            : Macro mode (25cm ~ 30cm) 
 For taking a close-up picture n Press   Shutter   button to take picture and camera will  n...