Vivitar Vivicam 4345 Users Manual

							Downloaded from www.Manualslib.com manuals search engine EN-11
1
2345
6
7
8
910
11
12
13
Rear View
1.Rec-play button
2.Menu button
3.Delete button
4.SArrow button (Up)
5.XArrow button (Right)
Self-timer button
6.TArrow button (Down)7.WArrow button (Left)
Flash button
8. Battery / SD card cover
9. / Zoom out (wide-angle) button
  Thumbnail button
10. / Zoom in (telephoto) button
11. LCD monitor
12. OK / (Display) button
13. Tripod socket  
						

							Downloaded from www.Manualslib.com manuals search engine EN-12
Mode Dial
You can select from seven shooting modes and setup mode according to shooting conditions to achieve
the desired effect.
ModeDescription
1.Power button Press to turn on/off the power.
2.PProgram Select this mode to permit the shutter speed and aperture
to be set manually.
3.AAutoSelect this mode to adjust point-and-shoot action.
4.VideoSelect this mode to record video clips.
5.
Portrait Select this mode to make people stand out with the
background out-of-focus.
6.
LandscapeUse this mode to take phototgraphs of distant scenery or
landscapes.
7.SportsUse this mode to shoot fast moving objests.
8.
NightSelect this option to take phototgraphs of people against a
dusk or night-time background.
9.Setup Select this mode to adjust the camera settings.
2
3
4
5
6
7
8
9
1  
						

							Downloaded from www.Manualslib.com manuals search engine EN-13
LCD Monitor Information
„ „„ „
„ Camera Mode
1. Mode indication
[  A]Auto Mode
[  
] Setup Mode
[ 
] Video Mode
[ 
 ] Landscape  Mode
[  P] Program Mode
[ 
] Sports Mode
[  
] Portrait Mode
[ 
] Night Mode
2. Image quality
[ 
] FINE
[  
] NORMAL
[  
] ECONOMY
3. Image size
[ 
 ] 2304 x 1728
[ 
 ] 2048 x 1536
[ 
 ] 1280 x 960
[ 
 ] 640 x 480
4. Possible number of shots
5. Internal memory/SD memory
card indicator[ 
 ] Status of internal memory
[ 
SD ] Status of SD memory card
6. Remaining battery status
[ 
 ] Full battery power
[ 
 ] Medium battery power
[ 
 ] Low battery power
[ 
 ] No battery power
7. Self-timer mode
[ 
] OFF
[ 
] 2 sec. delay
[ 
] 10 sec. delay
[ 
10+2] 10+2 sec. delay
8. White balance
AUTO
[ 
] DAYLIGHT
[ 
] CLOUDY[ 
] SUNSET
[  
] TUNGSTEN
[  
] FLUORESCENT
9. Capture mode indicator
[  
X1] SINGLE
[  
] BURST
[ 
 ] AEB
10. Date
11. Zoom stat
12. Focus area
13. Focus indicator
 (no indication for auto focus)
AUTO
 [ 
] MACRO
 [
] INFINITY
14. Flash mode
 [ 
] Auto Flash (Default)
 [ 
] Red Eye
 [  
] Forced flash
 [ 
] No Flash
3M8SD
2004.09.171.5x
P
213456
789
1011
12
1413
X1  
						

							Downloaded from www.Manualslib.com manuals search engine EN-14„ „„ „
„ Video Mode
1. Video mode
2. Recordable movie time available
3. SD memory card indicator (if present)
4. Battery power indicator
5. Focus area
„ „„ „
„ Image Playback
1. Playback mode
2. SD memory card indicator (if present)
3. Battery power indicator
4. Playback information
„ „„ „
„ Video Playback
1. Playback mode
2. Video mode
3. SD memory card indicator (if present)
4. Battery power indicator
5. Playback indicator
6. Playback information
00:33SD1
23
4
5
SD1
2
3
100-0001
SIZE
EV.
01. 04. 041280X960
+1.7
05:22
1
4
SD1
3
4
5
2
100-0001
SIZE
EV.
01. 04. 041280X960
+1.5
05:22
1
6  
						

							Downloaded from www.Manualslib.com manuals search engine EN-15
PREPARING VIVICAM 4345
Installing the Batteries (Optional Accessory)
You can use 2 AA size batteries to power the camera. Make sure that the power of ViviCam 4345 is off
before inserting or removing the batteries.
1. Make sure the camera is turned off.
2. Open the battery cover.
3. Insert the batteries in the correct orientation as shown in the
illustration.
4. Close the battery cover.
„To remove the batteries,turn the camera off before removing
batteries and hold the camera with the battery cover facing
upward, then open the battery cover.
„ Be careful not to drop the batteries when opening or closing the battery cover.  
						

							Downloaded from www.Manualslib.com manuals search engine EN-16
Using the AC Power Adapter (Optional Accessory)
Use of the AC power adapter is recommended if you intend to use the LCD monitor for a long time or
connect the camera to a PC.
1. Make sure your camera is turned off.
2. Connect one end of the AC power adapter to the
camera jack labeled DC IN 3.0V.
3. Connect the other end to an electrical outlet.
„Make sure to use only the AC power adapter specified for ViviCam 4345. Damage caused by the use of an
incorrect adapter is not covered under the warranty.
„To prevent unexpected auto power off resulting from no battery power left during the process of transferring your
images to the computer, use the AC power adapter as a power supply.
„The AC power adapter can only be used to power the camera. Batteries cannot be charged inside the camera.  
						

							Downloaded from www.Manualslib.com manuals search engine EN-17
Inserting and Removing an SD Memory Card (Optional Accessory)
ViviCam 4345 comes with 12MB of internal memory, allowing you to store captured still images or video
clips in the digital camera. Moreover, you can also expand the memory capacity by using an optional SD
(Secure Digital) memory card so that you can store more files.
1 . Make sure your camera is turned off before inserting or removing
a memory card.
2. Open the SD memory card cover.
3. Insert an SD memory card in the correct orientation as shown in
the illustration.
4. Close the battery/SD memory card cover.
„To remove the SD memory card, make sure the camera is
turned off. Press lightly on the edge of the memory card and
it will eject.
„Be sure to format an SD memory card with ViviCam 4345 before using it.
Refer to section in the manual titled “Formatting an SD Memory Card or
Internal Memory” for further details.
„To prevent valuable data from being accidentally erased from an SD card,
you can slide the write protect tab (on the side of the SD memory card)
to “LOCK”.
„To save, edit, or erase data on an SD memory card, you must unlock the card.  
						

							Downloaded from www.Manualslib.com manuals search engine EN-18
Attaching the Camera Strap
Attach the strap as shown in the illustration.
2
1
LED Indicators
IndicatorStateDescription/Activity
LED indicator Solid red ViviCam 4345 is powering up.
Solid greenViviCam 4345 is ready to record images (or movies).
LED indicator Blinking green USB communication/transfer in progress
LED indicator Blinking redCharging the flash.
Self-timer indicatorBlinking red The self-timer function is activated.  
						

							Downloaded from www.Manualslib.com manuals search engine EN-19
GETTING STARTED
Turning the Power On/Off
„ „„ „
„Press the  button until ViviCam 4345 turns on.
„ „„ „
„To turn the power off, press the 
 button again.
Choosing the Screen Language
When ViviCam 4345 is turned on for the first time, a language-selection screen will be displayed in the
monitor. Follow the steps below to choose the desired language.
1. Rotate the mode dial to 
 and turn your camera on by pressing
the  button.
2. Press X to select the [CUSTOM] menu.
3. Use T to select [LANGUAGE], then press the 
 button.
4. Use S or T to select the language you want.
5. Press the 
 button to confirm.
BASIC
CUSTOM
SET :
DATE & TIME
TV
LANGUAGE
LCD BRIGHTNESSY/M/D
NTSC
ENGLISHNTSCPA LY/M/D
3 / 5
SET :
1 / 7
LANGUAGEENGLISH  
						

							Downloaded from www.Manualslib.com manuals search engine EN-20
Setting the Date and Time
Follow the steps below to set the date display style, current date and time.
1. Rotate the mode dial to 
 and turn your camera on by pressing
the  button.
2. Press X to select the [CUSTOM] menu.
3. Use T to select [DATE & TIME], then press the 
 button.
„ „„ „
„ You may press W or X to switch the date types.
4. Press the W / X buttons to select Year, Month, Day and Time
fields.
„ „„ „
„ To increase a value, press the S button.
„ „„ „
„ To decrease a value, slide the zoom lever to the T button.
„ „„ „
„ The time is displayed in 24-hours format.
5. Press the 
 button after all fields are set.
BASIC
CUSTOM
SET :
DATE & TIME
TV
LANGUAGE
LCD BRIGHTNESSY/M/D
NTSC
ENGLISHNTSCPA L
1 / 5
SET :
DATE & TIME
/   10   /   200410
00   :   00
SELECT :